Faculty of Engineering

Aeronautical / Commerce (2017)


Note: This course version applies only to students first enrolling in 2017.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Aeronautical / Commerce (2017)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: 5.00 Years
Faculty/School: Faculty of Engineering
Years Offered: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

2. Requirements

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 24 credit points of Engineering core units

► 108 credit points of Aeronautical stream core units

► 12 credit points of Aeronautical Specialist elective units

Commerce:

► 96 credit points of Commerce units

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering

For the Bachelor of Engineering component of a combined degree:

(a) The units of study that may be taken for the Bachelor of Engineering component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering single degree;

(b) Except where approved, all candidates must complete a minimum of 144 credit points comprising:

(i) 36cp from the Engineering Core Table, including all required units;

(ii) 108cp from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Candidates who do not meet the requirements for the award of the Bachelor of Engineering Honours but who have otherwise satisfied the requirements of the Bachelor of Engineering shall graduate with the Bachelor of Engineering pass degree.

Requirements for the Bachelor of Commerce

For the Bachelor of Commerce component of a combined degree:

(a) The units of study that may be taken are set out in the Table of Undergraduate Units of Study from The University of Sydney Business School.

(b) Candidates must complete 96 credit points of units of study selected from the Table of Undergraduate Units of Study from The University of Sydney Business School including:

(i) 36 credit points of core units of study (30 junior credit points and six senior credit points); and

(ii) a major; and

(iii) at least 48 credit points of 2000 and/or 3000 level units of study.

Candidates for the award of the Bachelor of Commerce (Honours) who do not meet the requirements, and who have not already graduated, will be awarded the Bachelor of Commerce pass degree.

Engineering Honours requirements

(a) an EWAM of at least 65 immediately prior to the semester in which a thesis unit of study is first attempted; and

(b) have an EIHWAM of at least 65 at the completion of the degree; and

(c) complete the requirements within a time limit of 5 years for a single Bachelor of Engineering Honours degree or complete the requirements within a time limit of 6 years for a combined Bachelor of Engineering Honours combined degree.

Candidates who satisfy the requirements for the Engineering degree, but who have not satisfied each of Clauses (a), (b) and (c), will qualify for the award of the Bachelor of Engineering degree (i.e. the PASS degree, awarded without Honours).

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Majors

A major requires:

(a) the completion of 24 credit points chosen from units of study listed in the table for that major;

(b) satisfying any additional requirements specified for the major, and listed with the table of units for the major;

(c) the completion of a thesis project that has been approved by the Head of School (or delegate) as relevant to the topic of the major.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type CP CP From
3 Select from MATH1001: Differential Calculus


Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1021.
6 Select from BUSS1000: Future of Business


Note: You must complete BUSS1000 in your first semester of enrolment. BUSS1000 replaces BUSS1001 from 2017. Students who have not successfully completed BUSS1001 must complete BUSS1000.
6 Select from AERO1560: Introduction to Aerospace Engineering
6 Select from ENGG1801: Engineering Computing
3 Select from MATH1002: Linear Algebra

Note: MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.

Year 1 - Semester 2

Type CP CP From
3 Select from MATH1003: Integral Calculus and Modelling


Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1023.
6 Select from AMME1362: Introduction to Engineering Materials
6 Select from BUSS1030: Accounting, Business and Society
6 Select from ENGG1802: Engineering Mechanics
3 Select from MATH1005: Statistical Thinking with Data

Note: MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.

Year 2 - Semester 1

Type CP CP From
6 Select from BUSS1040: Economics for Business Decision Making
6 Select from AMME2261: Fluid Mechanics 1
6 Select from AMME2500: Engineering Dynamics
6 Select from AMME2700: Instrumentation


Note: AMME2700 will be discontinued from 2024. Students who have not yet completed this unit should take AMME1705 in its place.

Year 2 - Semester 2

Type CP CP From
6 Select from BUSS2000: Leading and Influencing in Business


Note: BUSS2000 will be run from 2018.
6 Select from AMME2262: Introduction to Thermal Engineering
6 Select from AMME2301: Mechanics of Solids
6 Select from MECH2400: Mechanical Systems Design 1

Year 3 - Semester 1

Type CP CP From
List
12 Select from Unit Blocks:
Commerce Junior Electives
Commerce Senior Electives
6 Select from AERO3360: Aerospace Structures 1
6 Select from AERO3460: Aerospace Design 1

Year 3 - Semester 2

Type CP CP From
List
12 Select from Unit Blocks:
Commerce Junior Electives
Commerce Senior Electives
6 Select from AERO2703: Aircraft Performance and Operations
6 Select from AERO3260: Aerodynamics 1

Year 4 - Semester 1

Type CP CP From
12 Select from Unit Block:
Commerce Senior Electives
6 Select from AERO3261: Propulsion
6 Select from AMME3500: System Dynamics and Control

Year 4 - Semester 2

Type CP CP From
12 Select from Unit Block:
Commerce Senior Electives
6 Select from Unit Block:
Aeronautical Specialist Electives
6 Select from AERO3560: Flight Mechanics 1

Year 5 - Semester 1

Type CP CP From
List
12 Select from Unit Blocks:
Commerce Junior Electives
Commerce Senior Electives
6 Select from AERO4460: Aerospace Design 3
6 Select from AMME4111: Thesis A
0 Select from ENGG4000: Practical Experience

Note: Aeronautical Specialist Electives can be taken in either semester and can be alternated with Commerce core units.

A minimum of 12 cp of Aeronautical Specialist units must be completed.

A minimum of 96 cp of Commerce units must be completed.

Year 5 - Semester 2

Type CP CP From
List
12 Select from Unit Blocks:
Commerce Junior Electives
Commerce Senior Electives
6 Select from Unit Block:
Aeronautical Specialist Electives
6 Select from AMME4112: Thesis B

Note: Aeronautical Specialist Electives can be taken in either semester and can be alternated with Commerce units.

A minimum of 12 cp of Aeronautical Specialist units must be completed.

A minimum of 96 cp of Commerce units must be completed.

4. Pathways

48cp Majors

Type CP CP From

Note: From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.

You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors

BCom Accounting Major

Type CP CP From
Core
6 ACCT1006: Accounting & Financial Management
Core
6 BUSS1020: Quantitative Business Analysis


Note: Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.
Core
6 BUSS1030: Accounting, Business and Society


Note: Completed as part of Commerce core units.
Core
6 ACCT2011: Financial Accounting A
Core
6 ACCT2012: Management Accounting A
24 Select from ACCT3011: Financial Accounting B
ACCT3012: Management Accounting B
ACCT3013: Financial Statement Analysis
ACCT3014: Auditing and Assurance
ACCT3031: International Corporate Governance
ACCT3032: Current Issues in Management Accounting
BUSS2100: Business Placement A (Internship)
CLAW2201: Corporations Law


Note: (a) BUSS2100 requires approval from the Discipline of Accounting before the unit can be included in the major. (b) CLAW2201 requires the completion of additional prerequisites outside the units listed for this major.

Note: Students undertaking a major in Accounting must complete the following units:

(1) Three prerequisite junior unit of study (6 credit points): ACCT1006, BUSS1020 and BUSS1030. BUSS1030 is a Commerce core unit and will have been completed by all Commerce students. Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.

(2) Two compulsory senior units of study (12 credit points): ACCT2011 and ACCT2012.

(3) At least four (six credit point) units of study or equivalent (24 credit points) selected from the senior elective units list.

BCom Business Analytics

Type CP CP From
Core
6 BUSS1020: Quantitative Business Analysis


Note: Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.
Core
6 QBUS2310: Management Science
Core
6 QBUS2810: Statistical Modelling for Business
24 Select from QBUS2320: Methods of Decision Analysis
QBUS2330: Operations Management
QBUS2350: Project Planning and Management
QBUS2820: Predictive Analytics
QBUS3310: Advanced Management Science
QBUS3320: Supply Chain Management
QBUS3810: Business Risk Analysis
QBUS3820: Data Mining and Data Analysis
QBUS3830: Advanced Analytics

Note: Students intending to complete a major in Business Analytics require the following units.

(1) One prerequisite junior unit of study (6 credit points): BUSS1020. Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.

(2) Two compulsory senior units of study (12 credit points): QBUS2310,QBUS2810.

(3) A minimum of 24 credit points from the senior elective units list (minimum of four units), with at least 12 credit points (two units) at 3000-level.

Note that a number of the QBUS units are replacements for previous ECMT units. See Business School website for equivalences between new QBUS units and previous ECMT units at http://sydney.edu.au/business/currentstudents/undergraduate/curriculum_information/undergraduate_courses/changes_to_undergraduate_programs

BCom Business Information Systems Major

Type CP CP From
Core
6 INFS1000: Business Information Systems
Core
6 INFS2001: IS for Performance Improvement
Core
6 INFS2020: Business Process Modelling & Improvement
24 Select from BUSS2100: Business Placement A (Internship)
INFS2010: Digital Information Design & Management
INFS2030: e-Business Management
INFS3030: Information Protection and Assurance
INFS3040: Enterprise Systems & Integrated Business
INFS3050: Business Intelligence for Managers
INFS3060: Managing Digital Innovation Projects
INFS3070: Business Analysis in Practice
INFS3080: Business Information Systems Project


Note: BUSS2100 requires approval from the Discipline of Business Information Systems before the unit can be included in the major

Note: Students undertaking a major in Business Information Systems must complete the following.

(1) One prerequisite junior unit of study (6 credit points): INFS1000.

(2) Two compulsory senior units of study (12 credit points): INFS2001 and INFS2020.

(3) At least four elective units of study (24 credit points) selected from the senior elective units list, noting that the units listed above are those units which are being offered for the current year only.

BCom Commercial Law Major

Type CP CP From
Core
6 CLAW1001: Foundations of Business Law
36 Select from BUSS2100: Business Placement A (Internship)
CLAW2201: Corporations Law
CLAW2202: Bankruptcy and Insolvency
CLAW2203: Stock Markets and Derivatives Law
CLAW2204: Banking and Finance Law
CLAW2205: Trade Practices and Consumer Law
CLAW2207: Legal Ethics and the Professions
CLAW2208: Business Regulation, Risk and Compliance
CLAW2209: Intellectual Property for Business
CLAW2211: Commercial Practice in China
CLAW2212: Franchising
CLAW2213: Legal Regulation of Int`l Business
CLAW3201: Australian Taxation System
CLAW3202: Tax Strategies for Business
CLAW3204: Capital Raising and Management
CLAW3206: Regulation of Mergers and Acquisitions
CLAW3207: Employment Regulation for Business
CLAW3208: Corporate Crime and Business


Note: BUSS2100 requires approval from the Discipline of Commercial Law before the unit can be included in the major.

Note: Students undertaking a major in Commercial law must complete the following.

(1) One prerequisite junior unit of study (6 credit points): CLAW1000.

(3) At least six elective units of study (36 credit points) selected from the senior elective units list.

BCom Econometrics Major

Type CP CP From
Core
6 BUSS1020: Quantitative Business Analysis


Note: Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.
Core
6 ECMT1020: Business and Economic Statistics B
Core
6 ECMT2150: Cross Section Econometrics
Core
6 ECMT2160: Time Series Econometrics
24 Select from ECMT2120: Analysis of Discrete Choice Data
ECMT2130: Financial Econometrics
ECMT3120: Applied Econometrics
ECMT3130: Forecasting for Economics and Business
ECMT3150: The Econometrics of Financial Markets
ECMT3160: Statistical Modelling
ECMT3170: Computational Econometrics


Note: ECMT2120, ECMT3160 and ECMT3170 are not offered in 2014.

Note: Students majoring in Econometrics must complete:

(1) Two prerequisite junior units of study (6 credit points): BUSS1020 (or pre-2012 unit ECMT1010) plus and ECMT1020. Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.

(2) Two compulsory senior units of study (12 credit points): ECMT2150, ECMT2160.

(3) Four units (24 credit points) chosen from the Senior Commerce Electives.

Students considering Economics or Econometrics units as part of their combined engineering/commerce degree are advised to observe the directions of the Business School handbook regarding the availability of these units for commerce combined students. Units and majors from the School of Economics (in the Faculty of Arts and Social Sciences) may be taken as part of the commerce combined degree, as well as units from the Business School, according to latest advice in Business School handbook at: http://sydney.edu.au/handbooks/business_school/subject_areas/subject_areas.shtml

BCom Economics Major

Type CP CP From
Core
6 BUSS1020: Quantitative Business Analysis


Note: Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.
Core
6 ECMT1020: Business and Economic Statistics B
Core
6 ECON1001: Introductory Microeconomics
Core
6 ECON1002: Introductory Macroeconomics
Core
6 ECOS2001: Intermediate Microeconomics


Note: May be replaced by ECOS2901 Intermediate Microeconomics Honours.
Core
6 ECOS2002: Intermediate Macroeconomics


Note: May be replaced by ECOS2902 Intermediate Macroeconomics Honours.
24 Select from ECOS2025: East Asian Economies
ECOS2201: Economics of Competition and Strategy
ECOS2306: Managerial Firms: Evolution & Attributes
ECOS2307: The European Economy
ECOS2903: Mathematical Economics A
ECOS3002: Development Economics
ECOS3003: Hierarchies, Incentives & Firm Structure
ECOS3004: History of Economic Thought
ECOS3005: Industrial Organisation
ECOS3006: International Trade
ECOS3007: International Macroeconomics
ECOS3008: Labour Economics
ECOS3010: Monetary Economics
ECOS3011: Public Finance
ECOS3012: Strategic Behaviour
ECOS3013: Economics of the Environment
ECOS3015: Law and Economics
ECOS3016: Experimental and Behavioural Economics
ECOS3017: Health Economics
ECOS3018: Economics of Growth
ECOS3019: Capital and Dynamics
ECOS3020: Special Topic in Economics
ECOS3021: Business Cycles and Asset Markets
ECOS3022: The Economics of Financial Markets
ECOS3023: Personnel Economics
ECOS3901: Advanced Microeconomics Honours
ECOS3902: Advanced Macroeconomics Honours
ECOS3903: Applied Economics
ECOS3904: Applied Macroeconomics Honours


Note: (a) Four units (24 credit points) must be completed from the units listed, with at least three at 3000-level (18 credit points). (b( ECOS2306 is not offered in 2014. (c) The units ECOS3901, ECOS3902, ECOS3903 and ECOS3904 require the completion of additional prerequisites/corequisites outside of the units of study listed for this major.

Note: Students majoring in Economics must complete:

(1) Four prerequisite junior unit of study (18 credit points): BUSS1020, ECMT1020, ECON1001 and ECON1002. Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.

(2) Two compulsory senior units of study (12 credit points): ECOS2001, ECOS2002.

(3) At least four elective units of study (24 credit points) selected from the ECOS senior elective units listed, with at least three at 3000-level (18 credit points).

Students considering Economics or Econometrics units as part of their combined engineering/commerce degree are advised to observe the directions of the Business School handbook regarding the availability of these units for commerce combined students. Units and majors from the School of Economics (in the Faculty of Arts and Social Sciences) may be taken as part of the commerce combined degree, as well as units from the Business School, according to latest advice in Business School handbook at: http://sydney.edu.au/handbooks/business_school/subject_areas/subject_areas.shtml

BCom Finance Major

Type CP CP From
Core
6 BUSS1020: Quantitative Business Analysis


Note: Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.
Core
6 FINC2011: Corporate Finance I
Core
6 FINC2012: Corporate Finance II
Core
6 FINC3017: Investments and Portfolio Management
18 Select from BUSS2100: Business Placement A (Internship)
FINC3011: International Financial Management
FINC3012: Derivative Securities
FINC3013: Mergers and Acquisitions
FINC3014: Trading and Dealing in Security Markets
FINC3015: Financial Valuation: Case Study Approach
FINC3018: Bank Financial Management
FINC3019: Fixed Income Securities
FINC3020: Financial Risk Management
FINC3021: Mathematical Finance
FINC3022: Alternative Investments
FINC3023: Behavioural Finance


Note: (a) BUSS2100 requires approval from the Discipline of Finance before the unit can be included in the major.

Note: Students undertaking a major in Finance must complete the following.

(1) One junior prerequisite unit of study, BUSS1020 (6 credit points). Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.

(2) Three compulsory senior units of study (18 credit points): FINC2011, FINC2012, FINC3017.

(3) At least 18 credit points selected from the FINC senior electives list.

Commerce core unit BUSS1040 is assumed knowledge for the Finance major. It is strongly recommended that students complete BUSS1040 (or equivalent units) first in preparing for this major.

BCom Industrial Relations and Human Resource Management Major

Type CP CP From
Core
6 WORK1003: Foundations of Work and Employment
Core
6 WORK2203: Industrial Relations Policy
Core
6 WORK2205: Human Resource Processes
24 Select from BUSS2100: Business Placement A (Internship)
WORK2209: Organisational Analysis and Behaviour
WORK2210: Strategic Management
WORK2211: Human Resource Strategies
WORK2217: International Human Resource Management
WORK2218: People and Organisations
WORK2219: Management and Organisational Ethics
WORK2222: Leadership in Organisations
WORK2227: Regulation at Work
WORK3922: Organisational Research Methods


Note: (a) BUSS2100 requires approval from the Discipline of Work and Organisational Studies before the unit can be included in the major.

Note: Students undertaking a major in Industrial Relations and Human Resource Management must complete the following.

(1) One junior prerequisite unit of study: WORK1003 (6 credit points).

(2) Two compulsory senior units of study (12 credit points): WORK2203, WORK2205.

(3) At least four elective units of study (24 credit points) selected from the WORK Senior Commerce Electives list.

BCom International Business Major

Type CP CP From
Core
6 IBUS2101: International Business Strategy
Core
6 IBUS2102: Cross-Cultural Management
Core
6 IBUS3101: International Business Alliances
Core
6 IBUS3102: International Risk Management
12 Select from ACCT3031: International Corporate Governance
BUSS2100: Business Placement A (Internship)
CLAW2211: Commercial Practice in China
FINC3011: International Financial Management
IBUS3103: Global Entrepreneurship and Enterprise
IBUS3104: Ethical International Business Decisions
IBUS3107: Business Negotiations
IBUS3108: Social Entrepreneurship
MKTG3116: International Marketing
WORK2217: International Human Resource Management
WORK2222: Leadership in Organisations


Note: BUSS2100 requires approval from the Discipline of International Business before the unit can be included in the major.

Note: For a major in International Business, students must complete a minimum 36 credit points in senior units of study comprising:

(1) Four compulsory senior units of study (24 credit points): IBUS2101, IBUS2102, IBUS3101, IBUS3102.

(2) At least two elective units of study (12 credit points) selected from the senior elective units list. Note that many senior elective units of study require the completion of additional prerequisites outside of those units listed for this major. Click on the individual unit for information about these. Students undertaking combined degrees will need to carefully consider prerequisite implications before selecting any of these units to ensure that they do not exceed the credit point limit for the BCom component.

BCom Management Major

Type CP CP From
Core
6 WORK2201: Foundations of Management
Core
6 WORK2210: Strategic Management
Core
6 WORK2218: People and Organisations
18 Select from BUSS2100: Business Placement A (Internship)
IBUS2102: Cross-Cultural Management
IBUS3107: Business Negotiations
QBUS2350: Project Planning and Management
WORK2209: Organisational Analysis and Behaviour
WORK2211: Human Resource Strategies
WORK2217: International Human Resource Management
WORK2219: Management and Organisational Ethics
WORK2222: Leadership in Organisations
WORK2227: Regulation at Work
WORK3922: Organisational Research Methods


Note: BUSS2100 requires approval from the Discipline of Work and Organisational Studies before the unit can be included in the major.

Note: For a major in Management, Engineering/Commerce combined degree students must complete the following.

(1) Three compulsory senior units of study (18 credit points): WORK2201, WORK2210, WORK2218.

(2) At least three units of study (18 credit points) selected from the senior elective units list.

Students taking this major must first have completed at least one of the core junior Bachelor of Commerce units as a prerequisite.

BCom Marketing Major

Type CP CP From
Core
6 MKTG1001: Marketing Principles
Core
6 MKTG2112: Consumer Behaviour
Core
6 MKTG2113: Marketing Research
Core
6 MKTG3118: Marketing Strategy and Planning
18 Select from BUSS2100: Business Placement A (Internship)
CLAW2212: Franchising
MKTG3110: Electronic Marketing
MKTG3112: Marketing Communications
MKTG3114: New Products Marketing
MKTG3116: International Marketing
MKTG3117: Services Marketing
MKTG3119: Public Relations Management
MKTG3120: Building and Managing Brands
MKTG3121: Advertising: Creative Principles


Note: (a) BUSS2100 requires approval from the Discipline of Marketing before the unit can be included in the major.

Note: Students intending to complete a major in Marketing must complete the following.

(1) One prerequisite junior unit of study (12 credit points): MKTG1001.

(2) Three compulsory senior units of study (12 credit points): MKTG2112, MKTG2113, MKTG3118.

(3) At least three units of study (18 credit points) selected from the MKTG Senior Commerce Electives list.

Major in Space Engineering (24cp)

Type CP CP From
Core
6 AERO2705: Space Engineering 1


Note: Replacing AERO2703
Core
6 AERO3760: Space Engineering 2
Core
6 AERO4701: Space Engineering 3


Note: Replacing AERO4460
6 Select from Unit Block Space Specialist Electives

Note: Students are required to complete 24cp as per the table to be eligible of this major. There are ATAR or WAM (>75%) entry requirements for enrolment in this major.

This Engineering major can be taken along with any of the listed Commerce majors.

5. Unit Blocks

Block 1 - Aeronautical Specialist Electives (Min CP: 12,Max CP: 12)

Unit Code Unit Name CP Sessions Offered
AERO4260 Aerodynamics 2 6 Semester 1
AERO4360 Aerospace Structures 2 6 Semester 1
AERO4560 Flight Mechanics 2 6 Semester 2

Block 2 - Commerce Junior Electives (Max CP: 18)

Unit Code Unit Name CP Sessions Offered
ACCT1006 Accounting & Financial Management 6 Semester 1
Semester 2
CLAW1001 Foundations of Business Law 6 Semester 1
Semester 2
Summer Early
ECMT1020 Business and Economic Statistics B 6 Semester 1
Semester 2
Summer Main
ECON1002 Introductory Macroeconomics 6 Semester 1
Semester 2
Summer Main
INFS1000 Business Information Systems 6 Semester 1
Semester 2
Winter Main
Summer Early
Summer Main
Summer Late
MKTG1001 Marketing Principles 6 Semester 1
Semester 2
WORK1003 Foundations of Work and Employment 6 Semester 1
Semester 2

Note: This information is correct as of 2017. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.

Block 3 - Commerce Senior Electives (Min CP: 54,Max CP: 72)

Unit Code Unit Name CP Sessions Offered
ACCT2011 Financial Accounting A 6 Semester 1
Semester 2
ACCT2012 Management Accounting A 6 Semester 1
Semester 2
ACCT3011 Financial Accounting B 6 Semester 1
Semester 2
ACCT3012 Management Accounting B 6 Semester 1
Semester 2
ACCT3013 Financial Statement Analysis 6 Semester 1
ACCT3014 Auditing and Assurance 6 Semester 1
Semester 2
ACCT3031 International Corporate Governance 6 Semester 2
ACCT3032 Current Issues in Management Accounting 6 Semester 1
BUSS2100 Business Placement A (Internship) 6 Semester 1
Semester 2
Int January
Int February
Int March
Int June
Int July
Int November
Int December
BUSS2200 Business Placement B (Internship) 6 Semester 1
Semester 2
Int January
Int February
Int March
Int June
Int July
Int November
Int December
BUSS2220 Small Business Structures and Taxation 6 Semester 1
Semester 2
BUSS2500 Washington D.C. Placement Program 6 Semester 1
Semester 2
Int February
BUSS2501 LA Placement Program 6 Semester 1
Semester 2
Int January
Int February
BUSS2502 Paris Placement Program 6 Semester 2
Int July
BUSS2503 Community Placement 6 Semester 1
Semester 2
Int January
Int February
Int March
Int July
Int December
BUSS3100 Business Placement C (Internship) 6 Semester 1
Semester 2
Int January
Int February
Int March
Int April
Int May
Int June
Int July
Int August
Int September
Int October
Int November
Int December
CLAW2201 Corporations Law 6 Semester 1
Semester 2
CLAW2202 Bankruptcy and Insolvency 6 Semester 1
Semester 2
CLAW2203 Stock Markets and Derivatives Law 6 Semester 1
Semester 2
CLAW2204 Banking and Finance Law 6 Semester 1
Semester 2
CLAW2205 Trade Practices and Consumer Law 6 Semester 1
Semester 2
CLAW2207 Legal Ethics and the Professions 6 Semester 1
Semester 2
CLAW2208 Business Regulation, Risk and Compliance 6 Semester 2
CLAW2209 Intellectual Property for Business 6 Semester 1
Semester 2
CLAW2211 Commercial Practice in China 6 Semester 1
Semester 2
CLAW2212 Franchising 6 Semester 1
CLAW2213 Legal Regulation of Int`l Business 6 Semester 1
CLAW3201 Australian Taxation System 6 Semester 1
Semester 2
CLAW3202 Tax Strategies for Business 6 Semester 2
CLAW3204 Capital Raising and Management 6 Semester 1
Semester 2
CLAW3206 Regulation of Mergers and Acquisitions 6 Semester 2
CLAW3207 Employment Regulation for Business 6 Semester 1
CLAW3208 Corporate Crime and Business 6 Semester 2
ECMT2110 Regression Modelling 6 Semester 1
Semester 2
ECMT2120 Analysis of Discrete Choice Data 6 Semester 2
ECMT2130 Financial Econometrics 6 Semester 2
ECMT2150 Cross Section Econometrics 6 Semester 1
ECMT2160 Time Series Econometrics 6 Semester 2
ECMT2620 Management Science 6 Semester 2
ECMT2630 Managerial Decision Making 6 Semester 1
ECMT2640 Operations Management 6 Semester 1
ECMT3110 Econometric Models and Methods 6 Semester 1
ECMT3120 Applied Econometrics 6 Semester 2
ECMT3130 Forecasting for Economics and Business 6 Semester 2
ECMT3150 The Econometrics of Financial Markets 6 Semester 1
ECMT3160 Statistical Modelling 6
ECMT3170 Computational Econometrics 6 Semester 2
ECMT3180 Business Risk Management 6 Semester 1
Semester 2
ECMT3610 Management Science Models and Methods 6 Semester 1
ECMT3620 Stochastic Modelling for Management 6
ECMT3640 Project Planning and Management 6 Semester 2
ECOS2001 Intermediate Microeconomics 6 Semester 1
Semester 2
Summer Main
ECOS2002 Intermediate Macroeconomics 6 Semester 1
Semester 2
Summer Main
ECOS2025 East Asian Economies 6 Semester 2
ECOS2201 Economics of Competition and Strategy 6 Semester 1
ECOS2306 Managerial Firms: Evolution & Attributes 6 Semester 2
ECOS2307 The European Economy 6 Semester 1
ECOS2551 Economics Exchange 6 S2 Late Int
S1 Late Int
ECOS2552 Economics Exchange 6 S2 Late Int
S1 Late Int
ECOS2901 Intermediate Microeconomics Honours 6 Semester 1
ECOS2902 Intermediate Macroeconomics Honours 6 Semester 2
ECOS2903 Mathematical Economics A 6 Semester 1
ECOS3002 Development Economics 6 Semester 2
ECOS3003 Hierarchies, Incentives & Firm Structure 6 Semester 2
ECOS3004 History of Economic Thought 6 Semester 2
ECOS3005 Industrial Organisation 6 Semester 1
Semester 2
ECOS3006 International Trade 6 Semester 1
Semester 2
ECOS3007 International Macroeconomics 6 Semester 1
Summer Main
ECOS3008 Labour Economics 6 Semester 1
ECOS3009 Markets, Regulation and Government Policy 6
ECOS3010 Monetary Economics 6 Semester 1
ECOS3011 Public Finance 6 Semester 2
ECOS3012 Strategic Behaviour 6 Semester 1
Summer Main
ECOS3013 Economics of the Environment 6 Semester 2
ECOS3015 Law and Economics 6 Semester 2
ECOS3016 Experimental and Behavioural Economics 6 Semester 2
ECOS3017 Health Economics 6 Semester 1
ECOS3018 Economics of Growth 6 Semester 2
ECOS3019 Capital and Dynamics 6 Semester 1
ECOS3020 Special Topic in Economics 6 Semester 1
Semester 2
ECOS3021 Business Cycles and Asset Markets 6 Semester 2
ECOS3022 The Economics of Financial Markets 6 Semester 1
ECOS3023 Personnel Economics 6
ECOS3551 Economics Exchange 6 S2 Late Int
S1 Late Int
ECOS3552 Economics Exchange 6 S2 Late Int
S1 Late Int
ECOS3553 Economics Exchange 6 S2 Late Int
S1 Late Int
ECOS3554 Economics Exchange 6 S2 Late Int
S1 Late Int
ECOS3901 Advanced Microeconomics Honours 6 Semester 1
ECOS3902 Advanced Macroeconomics Honours 6 Semester 2
ECOS3903 Applied Economics 6 Semester 2
ECOS3904 Applied Macroeconomics Honours 6
FINC2011 Corporate Finance I 6 Semester 1
Semester 2
Winter Main
Summer Early
Summer Main
Summer Late
FINC2012 Corporate Finance II 6 Semester 1
Semester 2
Summer Early
Summer Main
FINC3011 International Financial Management 6 Semester 1
FINC3012 Derivative Securities 6 Semester 2
FINC3013 Mergers and Acquisitions 6 Semester 2
FINC3014 Trading and Dealing in Security Markets 6 Semester 2
FINC3015 Financial Valuation: Case Study Approach 6 Semester 1
FINC3017 Investments and Portfolio Management 6 Semester 1
Semester 2
Summer Main
FINC3018 Bank Financial Management 6 Semester 2
FINC3019 Fixed Income Securities 6 Semester 1
Semester 2
FINC3020 Financial Risk Management 6 Semester 2
FINC3021 Mathematical Finance 6 Semester 1
FINC3022 Alternative Investments 6 Semester 1
FINC3023 Behavioural Finance 6 Semester 1
IBUS2101 International Business Strategy 6 Semester 1
Semester 2
Summer Main
Summer Late
IBUS2102 Cross-Cultural Management 6 Semester 1
Semester 2
Summer Early
Summer Main
IBUS3101 International Business Alliances 6 Semester 1
IBUS3102 International Risk Management 6 Semester 2
IBUS3103 Global Entrepreneurship and Enterprise 6 Semester 1
Semester 2
IBUS3104 Ethical International Business Decisions 6 Semester 2
IBUS3106 International Business Special Project 6 Semester 1
Semester 2
Int January
Int July
IBUS3107 Business Negotiations 6 Semester 1
Semester 2
IBUS3108 Social Entrepreneurship 6 Semester 1
INFS2001 IS for Performance Improvement 6 Semester 1
Semester 2
Summer Early
INFS2010 Digital Information Design & Management 6 Semester 1
Semester 2
INFS2020 Business Process Modelling & Improvement 6 Semester 2
INFS2030 e-Business Management 6 Semester 1
Semester 2
INFS3030 Information Protection and Assurance 6 Semester 2
INFS3040 Enterprise Systems & Integrated Business 6 Semester 1
INFS3050 Business Intelligence for Managers 6 Semester 1
Semester 2
INFS3060 Managing Digital Innovation Projects 6 Semester 1
Semester 2
INFS3070 Business Analysis in Practice 6 Semester 1
INFS3080 Business Information Systems Project 6 Semester 1
Semester 2
MKTG2112 Consumer Behaviour 6 Semester 2
MKTG2113 Marketing Research 6 Semester 1
Semester 2
MKTG3110 Electronic Marketing 6 Semester 2
MKTG3112 Marketing Communications 6 Semester 2
MKTG3114 New Products Marketing 6 Semester 2
MKTG3116 International Marketing 6 Semester 1
MKTG3117 Services Marketing 6 Semester 1
MKTG3118 Marketing Strategy and Planning 6 Semester 2
MKTG3119 Public Relations Management 6 Semester 2
MKTG3120 Building and Managing Brands 6 Semester 1
MKTG3121 Advertising: Creative Principles 6 Semester 1
QBUS2310 Management Science 6 Semester 2
QBUS2320 Methods of Decision Analysis 6 Semester 1
QBUS2330 Operations Management 6 Semester 1
QBUS2350 Project Planning and Management 6 Semester 2
QBUS2810 Statistical Modelling for Business 6 Semester 1
QBUS2820 Predictive Analytics 6 Semester 2
QBUS3310 Advanced Management Science 6 Semester 1
QBUS3320 Supply Chain Management 6 Semester 1
Semester 2
QBUS3810 Business Risk Analysis 6 Semester 1
QBUS3820 Data Mining and Data Analysis 6 Semester 2
QBUS3830 Advanced Analytics 6 Semester 1
WORK2201 Foundations of Management 6 Semester 1
WORK2203 Industrial Relations Policy 6 Semester 1
Semester 2
WORK2205 Human Resource Processes 6 Semester 1
Semester 2
WORK2209 Organisational Analysis and Behaviour 6 Semester 1
Semester 2
WORK2210 Strategic Management 6 Semester 1
Semester 2
WORK2211 Human Resource Strategies 6 Semester 2
WORK2217 International Human Resource Management 6 Semester 1
Semester 2
WORK2218 People and Organisations 6 Semester 1
Semester 2
WORK2219 Management and Organisational Ethics 6 Semester 2
WORK2222 Leadership in Organisations 6 Semester 1
Semester 2
WORK2227 Regulation at Work 6 Semester 1
WORK3922 Organisational Research Methods 6 Semester 2

Note: This information is correct as of 2017. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.

Block 4 - Space Specialist Electives (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
AERO4260 Aerodynamics 2 6 Semester 1
AERO4360 Aerospace Structures 2 6 Semester 1
AERO4560 Flight Mechanics 2 6 Semester 2
AERO5700 Space Engineering (Advanced) 6 Semester 1
Semester 2

Block 5 - Engineering Core (Min CP: 24,Max CP: 24)

Unit Code Unit Name CP Sessions Offered
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
ENGG4000 Practical Experience 0 Int January
Int February
Int March
Int April
Int May
Int June
Int July
Int August
Int September
Int October
Int November
Int December
MATH1001 Differential Calculus 3 Semester 1
Summer Main
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1003 Integral Calculus and Modelling 3 Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January

Block 6 - Aeronautical Stream Core (Min CP: 108,Max CP: 108)

Unit Code Unit Name CP Sessions Offered
AERO1560 Introduction to Aerospace Engineering 6 Semester 1
AERO2703 Aircraft Performance and Operations 6 Semester 2
AERO3260 Aerodynamics 1 6 Semester 2
AERO3261 Propulsion 6 Semester 1
AERO3360 Aerospace Structures 1 6 Semester 1
AERO3460 Aerospace Design 1 6 Semester 1
AERO3560 Flight Mechanics 1 6 Semester 2
AERO4460 Aerospace Design 3 6 Semester 1
AMME1362 Introduction to Engineering Materials 6 Semester 2
AMME2261 Fluid Mechanics 1 6 Semester 1
AMME2262 Introduction to Thermal Engineering 6 Semester 2
AMME2301 Mechanics of Solids 6 Semester 2
AMME2500 Engineering Dynamics 6 Semester 1
AMME2700 Instrumentation 6 Semester 1
AMME3500 System Dynamics and Control 6 Semester 1
ENGG1801 Engineering Computing 6 Semester 1
Int January
ENGG1802 Engineering Mechanics 6 Semester 2
Summer Main
Int January
MECH2400 Mechanical Systems Design 1 6 Semester 1

Block 7 - Commerce Core (Min CP: 24,Max CP: 24)

Unit Code Unit Name CP Sessions Offered
BUSS1000 Future of Business 6 Semester 1
Semester 2
BUSS1030 Accounting, Business and Society 6 Semester 1
Semester 2
BUSS1040 Economics for Business Decision Making 6 Semester 1
Semester 2
BUSS2000 Leading and Influencing in Business 6 Semester 1
Semester 2

Note: You must complete BUSS1000 in your first semester of enrolment. BUSS1000 replaces BUSS1001 from 2017. Students who have not successfully completed BUSS1001 must complete BUSS1000.

BUSS2000 will be run from 2018.

After Semester1, 2017 BUSS1002 will no longer be offered. Students who have not successfully completed BUSS1002 must replace this unit with one of the following Business School units: ACCT1006, CLAW1001, INFS1000, MKTG1001 or WORK1003.

BUSS3500, senior capstone unit for the Commerce component of the combined degree, has been discontinued and will be available for the last time in an intensive February session in 2017. If you have not completed the unit by this time, you must select an additional senior Commerce elective to replace it.