1. Overview

Course:	Aeronautical / Commerce (2017)
CP Required:	240
Min FT Duration:	5.00 Years
Min PT Duration:	5.00 Years
Faculty/School:	Faculty of Engineering
Years Offered:	2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

2. Requirements

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 24 credit points of Engineering core units

► 108 credit points of Aeronautical stream core units

► 12 credit points of Aeronautical Specialist elective units

Commerce:

► 96 credit points of Commerce units

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering

For the Bachelor of Engineering component of a combined degree:

(a) The units of study that may be taken for the Bachelor of Engineering component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering single degree;

(b) Except where approved, all candidates must complete a minimum of 144 credit points comprising:

(i) 36cp from the Engineering Core Table, including all required units;

(ii) 108cp from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Candidates who do not meet the requirements for the award of the Bachelor of Engineering Honours but who have otherwise satisfied the requirements of the Bachelor of Engineering shall graduate with the Bachelor of Engineering pass degree.

Requirements for the Bachelor of Commerce

For the Bachelor of Commerce component of a combined degree:

(a) The units of study that may be taken are set out in the Table of Undergraduate Units of Study from The University of Sydney Business School.

(b) Candidates must complete 96 credit points of units of study selected from the Table of Undergraduate Units of Study from The University of Sydney Business School including:

(i) 36 credit points of core units of study (30 junior credit points and six senior credit points); and

(ii) a major; and

(iii) at least 48 credit points of 2000 and/or 3000 level units of study.

Candidates for the award of the Bachelor of Commerce (Honours) who do not meet the requirements, and who have not already graduated, will be awarded the Bachelor of Commerce pass degree.

Engineering Honours requirements

(a) an EWAM of at least 65 immediately prior to the semester in which a thesis unit of study is first attempted; and

(b) have an EIHWAM of at least 65 at the completion of the degree; and

(c) complete the requirements within a time limit of 5 years for a single Bachelor of Engineering Honours degree or complete the requirements within a time limit of 6 years for a combined Bachelor of Engineering Honours combined degree.

Candidates who satisfy the requirements for the Engineering degree, but who have not satisfied each of Clauses (a), (b) and (c), will qualify for the award of the Bachelor of Engineering degree (i.e. the PASS degree, awarded without Honours).

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Majors

A major requires:

(a) the completion of 24 credit points chosen from units of study listed in the table for that major;

(b) satisfying any additional requirements specified for the major, and listed with the table of units for the major;

(c) the completion of a thesis project that has been approved by the Head of School (or delegate) as relevant to the topic of the major.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Note: MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.

Note: MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.

Note: Aeronautical Specialist Electives can be taken in either semester and can be alternated with Commerce core units.

A minimum of 12 cp of Aeronautical Specialist units must be completed.

A minimum of 96 cp of Commerce units must be completed.

Note: Aeronautical Specialist Electives can be taken in either semester and can be alternated with Commerce units.

A minimum of 12 cp of Aeronautical Specialist units must be completed.

A minimum of 96 cp of Commerce units must be completed.

4. Pathways

48cp Majors

Type

CP

CP From

Note: From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.

You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors

BCom Accounting Major

Type	CP	CP From
Core	6	ACCT1006: Accounting & Financial Management
Core	6	BUSS1020: Quantitative Business Analysis Note: Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.
Core	6	BUSS1030: Accounting, Business and Society Note: Completed as part of Commerce core units.
Core	6	ACCT2011: Financial Accounting A
Core	6	ACCT2012: Management Accounting A
Commerce Senior Electives	24	Select from ACCT3011: Financial Accounting B ACCT3012: Management Accounting B ACCT3013: Financial Statement Analysis ACCT3014: Auditing and Assurance ACCT3031: International Corporate Governance ACCT3032: Current Issues in Management Accounting BUSS2100: Business Placement A (Internship) CLAW2201: Corporations Law Note: (a) BUSS2100 requires approval from the Discipline of Accounting before the unit can be included in the major. (b) CLAW2201 requires the completion of additional prerequisites outside the units listed for this major.

Note: Students undertaking a major in Accounting must complete the following units:

(1) Three prerequisite junior unit of study (6 credit points): ACCT1006, BUSS1020 and BUSS1030. BUSS1030 is a Commerce core unit and will have been completed by all Commerce students. Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.

(2) Two compulsory senior units of study (12 credit points): ACCT2011 and ACCT2012.

(3) At least four (six credit point) units of study or equivalent (24 credit points) selected from the senior elective units list.

BCom Business Analytics

Type	CP	CP From
Core	6	BUSS1020: Quantitative Business Analysis Note: Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.
Core	6	QBUS2310: Management Science
Core	6	QBUS2810: Statistical Modelling for Business
Commerce Senior Electives	24	Select from QBUS2320: Methods of Decision Analysis QBUS2330: Operations Management QBUS2350: Project Planning and Management QBUS2820: Predictive Analytics QBUS3310: Advanced Management Science QBUS3320: Supply Chain Management QBUS3810: Business Risk Analysis QBUS3820: Data Mining and Data Analysis QBUS3830: Advanced Analytics

Note: Students intending to complete a major in Business Analytics require the following units.

(1) One prerequisite junior unit of study (6 credit points): BUSS1020. Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.

(2) Two compulsory senior units of study (12 credit points): QBUS2310,QBUS2810.

(3) A minimum of 24 credit points from the senior elective units list (minimum of four units), with at least 12 credit points (two units) at 3000-level.

Note that a number of the QBUS units are replacements for previous ECMT units. See Business School website for equivalences between new QBUS units and previous ECMT units at http://sydney.edu.au/business/currentstudents/undergraduate/curriculum_information/undergraduate_courses/changes_to_undergraduate_programs

BCom Business Information Systems Major

Type	CP	CP From
Core	6	INFS1000: Business Information Systems
Core	6	INFS2001: IS for Performance Improvement
Core	6	INFS2020: Business Process Modelling & Improvement
Commerce Senior Electives	24	Select from BUSS2100: Business Placement A (Internship) INFS2010: Digital Information Design & Management INFS2030: e-Business Management INFS3030: Information Protection and Assurance INFS3040: Enterprise Systems & Integrated Business INFS3050: Business Intelligence for Managers INFS3060: Managing Digital Innovation Projects INFS3070: Business Analysis in Practice INFS3080: Business Information Systems Project Note: BUSS2100 requires approval from the Discipline of Business Information Systems before the unit can be included in the major

Note: Students undertaking a major in Business Information Systems must complete the following.

(1) One prerequisite junior unit of study (6 credit points): INFS1000.

(2) Two compulsory senior units of study (12 credit points): INFS2001 and INFS2020.

(3) At least four elective units of study (24 credit points) selected from the senior elective units list, noting that the units listed above are those units which are being offered for the current year only.

BCom Commercial Law Major

Type	CP	CP From
Core	6	CLAW1001: Foundations of Business Law
Commerce Senior Electives	36	Select from BUSS2100: Business Placement A (Internship) CLAW2201: Corporations Law CLAW2202: Bankruptcy and Insolvency CLAW2203: Stock Markets and Derivatives Law CLAW2204: Banking and Finance Law CLAW2205: Trade Practices and Consumer Law CLAW2207: Legal Ethics and the Professions CLAW2208: Business Regulation, Risk and Compliance CLAW2209: Intellectual Property for Business CLAW2211: Commercial Practice in China CLAW2212: Franchising CLAW2213: Legal Regulation of Int`l Business CLAW3201: Australian Taxation System CLAW3202: Tax Strategies for Business CLAW3204: Capital Raising and Management CLAW3206: Regulation of Mergers and Acquisitions CLAW3207: Employment Regulation for Business CLAW3208: Corporate Crime and Business Note: BUSS2100 requires approval from the Discipline of Commercial Law before the unit can be included in the major.

Note: Students undertaking a major in Commercial law must complete the following.

(1) One prerequisite junior unit of study (6 credit points): CLAW1000.

(3) At least six elective units of study (36 credit points) selected from the senior elective units list.

BCom Econometrics Major

Type	CP	CP From
Core	6	BUSS1020: Quantitative Business Analysis Note: Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.
Core	6	ECMT1020: Business and Economic Statistics B
Core	6	ECMT2150: Cross Section Econometrics
Core	6	ECMT2160: Time Series Econometrics
Commerce Senior Electives	24	Select from ECMT2120: Analysis of Discrete Choice Data ECMT2130: Financial Econometrics ECMT3120: Applied Econometrics ECMT3130: Forecasting for Economics and Business ECMT3150: The Econometrics of Financial Markets ECMT3160: Statistical Modelling ECMT3170: Computational Econometrics Note: ECMT2120, ECMT3160 and ECMT3170 are not offered in 2014.

Note: Students majoring in Econometrics must complete:

(1) Two prerequisite junior units of study (6 credit points): BUSS1020 (or pre-2012 unit ECMT1010) plus and ECMT1020. Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.

(2) Two compulsory senior units of study (12 credit points): ECMT2150, ECMT2160.

(3) Four units (24 credit points) chosen from the Senior Commerce Electives.

Students considering Economics or Econometrics units as part of their combined engineering/commerce degree are advised to observe the directions of the Business School handbook regarding the availability of these units for commerce combined students. Units and majors from the School of Economics (in the Faculty of Arts and Social Sciences) may be taken as part of the commerce combined degree, as well as units from the Business School, according to latest advice in Business School handbook at: http://sydney.edu.au/handbooks/business_school/subject_areas/subject_areas.shtml

BCom Economics Major

Type	CP	CP From
Core	6	BUSS1020: Quantitative Business Analysis Note: Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.
Core	6	ECMT1020: Business and Economic Statistics B
Core	6	ECON1001: Introductory Microeconomics
Core	6	ECON1002: Introductory Macroeconomics
Core	6	ECOS2001: Intermediate Microeconomics Note: May be replaced by ECOS2901 Intermediate Microeconomics Honours.
Core	6	ECOS2002: Intermediate Macroeconomics Note: May be replaced by ECOS2902 Intermediate Macroeconomics Honours.
Commerce Senior Electives	24	Select from ECOS2025: East Asian Economies ECOS2201: Economics of Competition and Strategy ECOS2306: Managerial Firms: Evolution & Attributes ECOS2307: The European Economy ECOS2903: Mathematical Economics A ECOS3002: Development Economics ECOS3003: Hierarchies, Incentives & Firm Structure ECOS3004: History of Economic Thought ECOS3005: Industrial Organisation ECOS3006: International Trade ECOS3007: International Macroeconomics ECOS3008: Labour Economics ECOS3010: Monetary Economics ECOS3011: Public Finance ECOS3012: Strategic Behaviour ECOS3013: Economics of the Environment ECOS3015: Law and Economics ECOS3016: Experimental and Behavioural Economics ECOS3017: Health Economics ECOS3018: Economics of Growth ECOS3019: Capital and Dynamics ECOS3020: Special Topic in Economics ECOS3021: Business Cycles and Asset Markets ECOS3022: The Economics of Financial Markets ECOS3023: Personnel Economics ECOS3901: Advanced Microeconomics Honours ECOS3902: Advanced Macroeconomics Honours ECOS3903: Applied Economics ECOS3904: Applied Macroeconomics Honours Note: (a) Four units (24 credit points) must be completed from the units listed, with at least three at 3000-level (18 credit points). (b( ECOS2306 is not offered in 2014. (c) The units ECOS3901, ECOS3902, ECOS3903 and ECOS3904 require the completion of additional prerequisites/corequisites outside of the units of study listed for this major.

Note: Students majoring in Economics must complete:

(1) Four prerequisite junior unit of study (18 credit points): BUSS1020, ECMT1020, ECON1001 and ECON1002. Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.

(2) Two compulsory senior units of study (12 credit points): ECOS2001, ECOS2002.

(3) At least four elective units of study (24 credit points) selected from the ECOS senior elective units listed, with at least three at 3000-level (18 credit points).

Students considering Economics or Econometrics units as part of their combined engineering/commerce degree are advised to observe the directions of the Business School handbook regarding the availability of these units for commerce combined students. Units and majors from the School of Economics (in the Faculty of Arts and Social Sciences) may be taken as part of the commerce combined degree, as well as units from the Business School, according to latest advice in Business School handbook at: http://sydney.edu.au/handbooks/business_school/subject_areas/subject_areas.shtml

BCom Finance Major

Type	CP	CP From
Core	6	BUSS1020: Quantitative Business Analysis Note: Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.
Core	6	FINC2011: Corporate Finance I
Core	6	FINC2012: Corporate Finance II
Core	6	FINC3017: Investments and Portfolio Management
Commerce Senior Electives	18	Select from BUSS2100: Business Placement A (Internship) FINC3011: International Financial Management FINC3012: Derivative Securities FINC3013: Mergers and Acquisitions FINC3014: Trading and Dealing in Security Markets FINC3015: Financial Valuation: Case Study Approach FINC3018: Bank Financial Management FINC3019: Fixed Income Securities FINC3020: Financial Risk Management FINC3021: Mathematical Finance FINC3022: Alternative Investments FINC3023: Behavioural Finance Note: (a) BUSS2100 requires approval from the Discipline of Finance before the unit can be included in the major.

Note: Students undertaking a major in Finance must complete the following.

(1) One junior prerequisite unit of study, BUSS1020 (6 credit points). Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.

(2) Three compulsory senior units of study (18 credit points): FINC2011, FINC2012, FINC3017.

(3) At least 18 credit points selected from the FINC senior electives list.

Commerce core unit BUSS1040 is assumed knowledge for the Finance major. It is strongly recommended that students complete BUSS1040 (or equivalent units) first in preparing for this major.

BCom Industrial Relations and Human Resource Management Major

Type	CP	CP From
Core	6	WORK1003: Foundations of Work and Employment
Core	6	WORK2203: Industrial Relations Policy
Core	6	WORK2205: Human Resource Processes
Commerce Senior Electives	24	Select from BUSS2100: Business Placement A (Internship) WORK2209: Organisational Analysis and Behaviour WORK2210: Strategic Management WORK2211: Human Resource Strategies WORK2217: International Human Resource Management WORK2218: People and Organisations WORK2219: Management and Organisational Ethics WORK2222: Leadership in Organisations WORK2227: Regulation at Work WORK3922: Organisational Research Methods Note: (a) BUSS2100 requires approval from the Discipline of Work and Organisational Studies before the unit can be included in the major.

Note: Students undertaking a major in Industrial Relations and Human Resource Management must complete the following.

(1) One junior prerequisite unit of study: WORK1003 (6 credit points).

(2) Two compulsory senior units of study (12 credit points): WORK2203, WORK2205.

(3) At least four elective units of study (24 credit points) selected from the WORK Senior Commerce Electives list.

BCom International Business Major

Type	CP	CP From
Core	6	IBUS2101: International Business Strategy
Core	6	IBUS2102: Cross-Cultural Management
Core	6	IBUS3101: International Business Alliances
Core	6	IBUS3102: International Risk Management
Commerce Senior Electives	12	Select from ACCT3031: International Corporate Governance BUSS2100: Business Placement A (Internship) CLAW2211: Commercial Practice in China FINC3011: International Financial Management IBUS3103: Global Entrepreneurship and Enterprise IBUS3104: Ethical International Business Decisions IBUS3107: Business Negotiations IBUS3108: Social Entrepreneurship MKTG3116: International Marketing WORK2217: International Human Resource Management WORK2222: Leadership in Organisations Note: BUSS2100 requires approval from the Discipline of International Business before the unit can be included in the major.

Note: For a major in International Business, students must complete a minimum 36 credit points in senior units of study comprising:

(1) Four compulsory senior units of study (24 credit points): IBUS2101, IBUS2102, IBUS3101, IBUS3102.

(2) At least two elective units of study (12 credit points) selected from the senior elective units list. Note that many senior elective units of study require the completion of additional prerequisites outside of those units listed for this major. Click on the individual unit for information about these. Students undertaking combined degrees will need to carefully consider prerequisite implications before selecting any of these units to ensure that they do not exceed the credit point limit for the BCom component.

BCom Management Major

Type	CP	CP From
Core	6	WORK2201: Foundations of Management
Core	6	WORK2210: Strategic Management
Core	6	WORK2218: People and Organisations
Commerce Senior Electives	18	Select from BUSS2100: Business Placement A (Internship) IBUS2102: Cross-Cultural Management IBUS3107: Business Negotiations QBUS2350: Project Planning and Management WORK2209: Organisational Analysis and Behaviour WORK2211: Human Resource Strategies WORK2217: International Human Resource Management WORK2219: Management and Organisational Ethics WORK2222: Leadership in Organisations WORK2227: Regulation at Work WORK3922: Organisational Research Methods Note: BUSS2100 requires approval from the Discipline of Work and Organisational Studies before the unit can be included in the major.

Note: For a major in Management, Engineering/Commerce combined degree students must complete the following.

(1) Three compulsory senior units of study (18 credit points): WORK2201, WORK2210, WORK2218.

(2) At least three units of study (18 credit points) selected from the senior elective units list.

Students taking this major must first have completed at least one of the core junior Bachelor of Commerce units as a prerequisite.

BCom Marketing Major

Type	CP	CP From
Core	6	MKTG1001: Marketing Principles
Core	6	MKTG2112: Consumer Behaviour
Core	6	MKTG2113: Marketing Research
Core	6	MKTG3118: Marketing Strategy and Planning
Commerce Senior Electives	18	Select from BUSS2100: Business Placement A (Internship) CLAW2212: Franchising MKTG3110: Electronic Marketing MKTG3112: Marketing Communications MKTG3114: New Products Marketing MKTG3116: International Marketing MKTG3117: Services Marketing MKTG3119: Public Relations Management MKTG3120: Building and Managing Brands MKTG3121: Advertising: Creative Principles Note: (a) BUSS2100 requires approval from the Discipline of Marketing before the unit can be included in the major.

Note: Students intending to complete a major in Marketing must complete the following.

(1) One prerequisite junior unit of study (12 credit points): MKTG1001.

(2) Three compulsory senior units of study (12 credit points): MKTG2112, MKTG2113, MKTG3118.

(3) At least three units of study (18 credit points) selected from the MKTG Senior Commerce Electives list.

Major in Space Engineering (24cp)

Type	CP	CP From
Core	6	AERO2705: Space Engineering 1 Note: Replacing AERO2703
Core	6	AERO3760: Space Engineering 2
Core	6	AERO4701: Space Engineering 3 Note: Replacing AERO4460
Space Specialist Electives	6	Select from Unit Block Space Specialist Electives

Note: Students are required to complete 24cp as per the table to be eligible of this major. There are ATAR or WAM (>75%) entry requirements for enrolment in this major.

This Engineering major can be taken along with any of the listed Commerce majors.

5. Unit Blocks

Block 1 - Aeronautical Specialist Electives (Min CP: 12,Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
AERO4260	Aerodynamics 2	6	Semester 1
AERO4360	Aerospace Structures 2	6	Semester 1
AERO4560	Flight Mechanics 2	6	Semester 2

Block 2 - Commerce Junior Electives (Max CP: 18)

Unit Code	Unit Name	CP	Sessions Offered
ACCT1006	Accounting & Financial Management	6	Semester 1 Semester 2
CLAW1001	Foundations of Business Law	6	Semester 1 Semester 2 Summer Early
ECMT1020	Business and Economic Statistics B	6	Semester 1 Semester 2 Summer Main
ECON1002	Introductory Macroeconomics	6	Semester 1 Semester 2 Summer Main
INFS1000	Business Information Systems	6	Semester 1 Semester 2 Winter Main Summer Early Summer Main Summer Late
MKTG1001	Marketing Principles	6	Semester 1 Semester 2
WORK1003	Foundations of Work and Employment	6	Semester 1 Semester 2

Note: This information is correct as of 2017. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.

Block 3 - Commerce Senior Electives (Min CP: 54,Max CP: 72)

Unit Code	Unit Name	CP	Sessions Offered
ACCT2011	Financial Accounting A	6	Semester 1 Semester 2
ACCT2012	Management Accounting A	6	Semester 1 Semester 2
ACCT3011	Financial Accounting B	6	Semester 1 Semester 2
ACCT3012	Management Accounting B	6	Semester 1 Semester 2
ACCT3013	Financial Statement Analysis	6	Semester 1
ACCT3014	Auditing and Assurance	6	Semester 1 Semester 2
ACCT3031	International Corporate Governance	6	Semester 2
ACCT3032	Current Issues in Management Accounting	6	Semester 1
BUSS2100	Business Placement A (Internship)	6	Semester 1 Semester 2 Int January Int February Int March Int June Int July Int November Int December
BUSS2200	Business Placement B (Internship)	6	Semester 1 Semester 2 Int January Int February Int March Int June Int July Int November Int December
BUSS2220	Small Business Structures and Taxation	6	Semester 1 Semester 2
BUSS2500	Washington D.C. Placement Program	6	Semester 1 Semester 2 Int February
BUSS2501	LA Placement Program	6	Semester 1 Semester 2 Int January Int February
BUSS2502	Paris Placement Program	6	Semester 2 Int July
BUSS2503	Community Placement	6	Semester 1 Semester 2 Int January Int February Int March Int July Int December
BUSS3100	Business Placement C (Internship)	6	Semester 1 Semester 2 Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December
CLAW2201	Corporations Law	6	Semester 1 Semester 2
CLAW2202	Bankruptcy and Insolvency	6	Semester 1 Semester 2
CLAW2203	Stock Markets and Derivatives Law	6	Semester 1 Semester 2
CLAW2204	Banking and Finance Law	6	Semester 1 Semester 2
CLAW2205	Trade Practices and Consumer Law	6	Semester 1 Semester 2
CLAW2207	Legal Ethics and the Professions	6	Semester 1 Semester 2
CLAW2208	Business Regulation, Risk and Compliance	6	Semester 2
CLAW2209	Intellectual Property for Business	6	Semester 1 Semester 2
CLAW2211	Commercial Practice in China	6	Semester 1 Semester 2
CLAW2212	Franchising	6	Semester 1
CLAW2213	Legal Regulation of Int`l Business	6	Semester 1
CLAW3201	Australian Taxation System	6	Semester 1 Semester 2
CLAW3202	Tax Strategies for Business	6	Semester 2
CLAW3204	Capital Raising and Management	6	Semester 1 Semester 2
CLAW3206	Regulation of Mergers and Acquisitions	6	Semester 2
CLAW3207	Employment Regulation for Business	6	Semester 1
CLAW3208	Corporate Crime and Business	6	Semester 2
ECMT2110	Regression Modelling	6	Semester 1 Semester 2
ECMT2120	Analysis of Discrete Choice Data	6	Semester 2
ECMT2130	Financial Econometrics	6	Semester 2
ECMT2150	Cross Section Econometrics	6	Semester 1
ECMT2160	Time Series Econometrics	6	Semester 2
ECMT2620	Management Science	6	Semester 2
ECMT2630	Managerial Decision Making	6	Semester 1
ECMT2640	Operations Management	6	Semester 1
ECMT3110	Econometric Models and Methods	6	Semester 1
ECMT3120	Applied Econometrics	6	Semester 2
ECMT3130	Forecasting for Economics and Business	6	Semester 2
ECMT3150	The Econometrics of Financial Markets	6	Semester 1
ECMT3160	Statistical Modelling	6
ECMT3170	Computational Econometrics	6	Semester 2
ECMT3180	Business Risk Management	6	Semester 1 Semester 2
ECMT3610	Management Science Models and Methods	6	Semester 1
ECMT3620	Stochastic Modelling for Management	6
ECMT3640	Project Planning and Management	6	Semester 2
ECOS2001	Intermediate Microeconomics	6	Semester 1 Semester 2 Summer Main
ECOS2002	Intermediate Macroeconomics	6	Semester 1 Semester 2 Summer Main
ECOS2025	East Asian Economies	6	Semester 2
ECOS2201	Economics of Competition and Strategy	6	Semester 1
ECOS2306	Managerial Firms: Evolution & Attributes	6	Semester 2
ECOS2307	The European Economy	6	Semester 1
ECOS2551	Economics Exchange	6	S2 Late Int S1 Late Int
ECOS2552	Economics Exchange	6	S2 Late Int S1 Late Int
ECOS2901	Intermediate Microeconomics Honours	6	Semester 1
ECOS2902	Intermediate Macroeconomics Honours	6	Semester 2
ECOS2903	Mathematical Economics A	6	Semester 1
ECOS3002	Development Economics	6	Semester 2
ECOS3003	Hierarchies, Incentives & Firm Structure	6	Semester 2
ECOS3004	History of Economic Thought	6	Semester 2
ECOS3005	Industrial Organisation	6	Semester 1 Semester 2
ECOS3006	International Trade	6	Semester 1 Semester 2
ECOS3007	International Macroeconomics	6	Semester 1 Summer Main
ECOS3008	Labour Economics	6	Semester 1
ECOS3009	Markets, Regulation and Government Policy	6
ECOS3010	Monetary Economics	6	Semester 1
ECOS3011	Public Finance	6	Semester 2
ECOS3012	Strategic Behaviour	6	Semester 1 Summer Main
ECOS3013	Economics of the Environment	6	Semester 2
ECOS3015	Law and Economics	6	Semester 2
ECOS3016	Experimental and Behavioural Economics	6	Semester 2
ECOS3017	Health Economics	6	Semester 1
ECOS3018	Economics of Growth	6	Semester 2
ECOS3019	Capital and Dynamics	6	Semester 1
ECOS3020	Special Topic in Economics	6	Semester 1 Semester 2
ECOS3021	Business Cycles and Asset Markets	6	Semester 2
ECOS3022	The Economics of Financial Markets	6	Semester 1
ECOS3023	Personnel Economics	6
ECOS3551	Economics Exchange	6	S2 Late Int S1 Late Int
ECOS3552	Economics Exchange	6	S2 Late Int S1 Late Int
ECOS3553	Economics Exchange	6	S2 Late Int S1 Late Int
ECOS3554	Economics Exchange	6	S2 Late Int S1 Late Int
ECOS3901	Advanced Microeconomics Honours	6	Semester 1
ECOS3902	Advanced Macroeconomics Honours	6	Semester 2
ECOS3903	Applied Economics	6	Semester 2
ECOS3904	Applied Macroeconomics Honours	6
FINC2011	Corporate Finance I	6	Semester 1 Semester 2 Winter Main Summer Early Summer Main Summer Late
FINC2012	Corporate Finance II	6	Semester 1 Semester 2 Summer Early Summer Main
FINC3011	International Financial Management	6	Semester 1
FINC3012	Derivative Securities	6	Semester 2
FINC3013	Mergers and Acquisitions	6	Semester 2
FINC3014	Trading and Dealing in Security Markets	6	Semester 2
FINC3015	Financial Valuation: Case Study Approach	6	Semester 1
FINC3017	Investments and Portfolio Management	6	Semester 1 Semester 2 Summer Main
FINC3018	Bank Financial Management	6	Semester 2
FINC3019	Fixed Income Securities	6	Semester 1 Semester 2
FINC3020	Financial Risk Management	6	Semester 2
FINC3021	Mathematical Finance	6	Semester 1
FINC3022	Alternative Investments	6	Semester 1
FINC3023	Behavioural Finance	6	Semester 1
IBUS2101	International Business Strategy	6	Semester 1 Semester 2 Summer Main Summer Late
IBUS2102	Cross-Cultural Management	6	Semester 1 Semester 2 Summer Early Summer Main
IBUS3101	International Business Alliances	6	Semester 1
IBUS3102	International Risk Management	6	Semester 2
IBUS3103	Global Entrepreneurship and Enterprise	6	Semester 1 Semester 2
IBUS3104	Ethical International Business Decisions	6	Semester 2
IBUS3106	International Business Special Project	6	Semester 1 Semester 2 Int January Int July
IBUS3107	Business Negotiations	6	Semester 1 Semester 2
IBUS3108	Social Entrepreneurship	6	Semester 1
INFS2001	IS for Performance Improvement	6	Semester 1 Semester 2 Summer Early
INFS2010	Digital Information Design & Management	6	Semester 1 Semester 2
INFS2020	Business Process Modelling & Improvement	6	Semester 2
INFS2030	e-Business Management	6	Semester 1 Semester 2
INFS3030	Information Protection and Assurance	6	Semester 2
INFS3040	Enterprise Systems & Integrated Business	6	Semester 1
INFS3050	Business Intelligence for Managers	6	Semester 1 Semester 2
INFS3060	Managing Digital Innovation Projects	6	Semester 1 Semester 2
INFS3070	Business Analysis in Practice	6	Semester 1
INFS3080	Business Information Systems Project	6	Semester 1 Semester 2
MKTG2112	Consumer Behaviour	6	Semester 2
MKTG2113	Marketing Research	6	Semester 1 Semester 2
MKTG3110	Electronic Marketing	6	Semester 2
MKTG3112	Marketing Communications	6	Semester 2
MKTG3114	New Products Marketing	6	Semester 2
MKTG3116	International Marketing	6	Semester 1
MKTG3117	Services Marketing	6	Semester 1
MKTG3118	Marketing Strategy and Planning	6	Semester 2
MKTG3119	Public Relations Management	6	Semester 2
MKTG3120	Building and Managing Brands	6	Semester 1
MKTG3121	Advertising: Creative Principles	6	Semester 1
QBUS2310	Management Science	6	Semester 2
QBUS2320	Methods of Decision Analysis	6	Semester 1
QBUS2330	Operations Management	6	Semester 1
QBUS2350	Project Planning and Management	6	Semester 2
QBUS2810	Statistical Modelling for Business	6	Semester 1
QBUS2820	Predictive Analytics	6	Semester 2
QBUS3310	Advanced Management Science	6	Semester 1
QBUS3320	Supply Chain Management	6	Semester 1 Semester 2
QBUS3810	Business Risk Analysis	6	Semester 1
QBUS3820	Data Mining and Data Analysis	6	Semester 2
QBUS3830	Advanced Analytics	6	Semester 1
WORK2201	Foundations of Management	6	Semester 1
WORK2203	Industrial Relations Policy	6	Semester 1 Semester 2
WORK2205	Human Resource Processes	6	Semester 1 Semester 2
WORK2209	Organisational Analysis and Behaviour	6	Semester 1 Semester 2
WORK2210	Strategic Management	6	Semester 1 Semester 2
WORK2211	Human Resource Strategies	6	Semester 2
WORK2217	International Human Resource Management	6	Semester 1 Semester 2
WORK2218	People and Organisations	6	Semester 1 Semester 2
WORK2219	Management and Organisational Ethics	6	Semester 2
WORK2222	Leadership in Organisations	6	Semester 1 Semester 2
WORK2227	Regulation at Work	6	Semester 1
WORK3922	Organisational Research Methods	6	Semester 2

Note: This information is correct as of 2017. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.

Block 4 - Space Specialist Electives (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
AERO4260	Aerodynamics 2	6	Semester 1
AERO4360	Aerospace Structures 2	6	Semester 1
AERO4560	Flight Mechanics 2	6	Semester 2
AERO5700	Space Engineering (Advanced)	6	Semester 1 Semester 2

Block 5 - Engineering Core (Min CP: 24,Max CP: 24)

Unit Code	Unit Name	CP	Sessions Offered
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
ENGG4000	Practical Experience	0	Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December
MATH1001	Differential Calculus	3	Semester 1 Summer Main
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1003	Integral Calculus and Modelling	3	Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January

Block 6 - Aeronautical Stream Core (Min CP: 108,Max CP: 108)

Unit Code	Unit Name	CP	Sessions Offered
AERO1560	Introduction to Aerospace Engineering	6	Semester 1
AERO2703	Aircraft Performance and Operations	6	Semester 2
AERO3260	Aerodynamics 1	6	Semester 2
AERO3261	Propulsion	6	Semester 1
AERO3360	Aerospace Structures 1	6	Semester 1
AERO3460	Aerospace Design 1	6	Semester 1
AERO3560	Flight Mechanics 1	6	Semester 2
AERO4460	Aerospace Design 3	6	Semester 1
AMME1362	Introduction to Engineering Materials	6	Semester 2
AMME2261	Fluid Mechanics 1	6	Semester 1
AMME2262	Introduction to Thermal Engineering	6	Semester 2
AMME2301	Mechanics of Solids	6	Semester 2
AMME2500	Engineering Dynamics	6	Semester 1
AMME2700	Instrumentation	6	Semester 1
AMME3500	System Dynamics and Control	6	Semester 1
ENGG1801	Engineering Computing	6	Semester 1 Int January
ENGG1802	Engineering Mechanics	6	Semester 2 Summer Main Int January
MECH2400	Mechanical Systems Design 1	6	Semester 1

Block 7 - Commerce Core (Min CP: 24,Max CP: 24)

Unit Code	Unit Name	CP	Sessions Offered
BUSS1000	Future of Business	6	Semester 1 Semester 2
BUSS1030	Accounting, Business and Society	6	Semester 1 Semester 2
BUSS1040	Economics for Business Decision Making	6	Semester 1 Semester 2
BUSS2000	Leading and Influencing in Business	6	Semester 1 Semester 2

Note: You must complete BUSS1000 in your first semester of enrolment. BUSS1000 replaces BUSS1001 from 2017. Students who have not successfully completed BUSS1001 must complete BUSS1000.

BUSS2000 will be run from 2018.

After Semester1, 2017 BUSS1002 will no longer be offered. Students who have not successfully completed BUSS1002 must replace this unit with one of the following Business School units: ACCT1006, CLAW1001, INFS1000, MKTG1001 or WORK1003.

BUSS3500, senior capstone unit for the Commerce component of the combined degree, has been discontinued and will be available for the last time in an intensive February session in 2017. If you have not completed the unit by this time, you must select an additional senior Commerce elective to replace it.