Note: This course version is currently under review and is subject to change.

ProgramsEngBE HonsBE Hons CombinedBE Hons/BPM ( -2018)Mechatronic / Project Management (2018)


Show information forcommencing students (ie. started First Year then).
 
Faculty of Engineeringengineering.undergraduate@sydney.edu.au
ASK ABOUT THIS COURSE


Print View | Download as PDF Administrative Information (Fees, ATAR etc.)

Select plan for Major/Pathway

Year 1 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6ENGG1801: Engineering Computing
3MATH1021: Calculus of One Variable
6ENGG1850: Introduction to Project Management
3MATH1002: Linear Algebra
6MTRX1701: Introduction to Mechatronic Engineering
0ENGP1000: Professional Engagement Program 1


Note:  All students must enrol in ENGP1000 in their first semester of enrolment.

New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note:   MATH1021 and MATH1002 may be replaced by advanced units MATH1921 and MATH1902.

Year 1 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
3MATH1023: Multivariable Calculus and Modelling
6PMGT1852: Facilitation and Stakeholder Engagement
6AMME1362: Introduction to Engineering Materials
6ENGG1802: Engineering Mechanics
3MATH1005: Statistical Thinking with Data

Note:   MATH1023 and MATH1005 may be replaced by advanced units MATH1923 and MATH1905.

Year 2 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6BUSS1040: Economics for Business Decision Making
6ELEC1103: Fundamentals of Electrical and Electronic Engineering
6AMME2500: Engineering Dynamics
6ENGG1111: Integrated Engineering 1

Note:   Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.

Year 2 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6MTRX1702: Mechatronics 1
6ENGG2855: Project Acceptance
6MTRX1705: Introduction to Mechatronic Design
6ENGG2852: Project Based Organisational Behaviour [not offered in 2020]


Note:  This unit is discontinued from 2019. Replacement unit is PMGT2854.
0ENGP2000: Professional Engagement Program 2


Note:  New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 3 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6ENGG2850: Project Cost and Finance
6ENGG2851: Project Analytics
6MTRX2700: Mechatronics 2
6AMME3500: System Dynamics and Control

Year 3 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
2ENGG2111: Integrated Engineering 2
6MECH2400: Mechanical Systems Design 1
6ENGG3854: Legal Aspects of Projects
6AMME2301: Mechanics of Solids 1
6ELEC2104: Electronic Devices and Circuits

Note:   Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.

Year 4 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
2ENGG3111: Integrated Engineering 3
6ENGG3853: Project Risk Management: Tools & Techniques
6MECH3660: Manufacturing Engineering
6PMGT3858: Adapting to Project Context
6Project Management Electives


Note:  At least 18 credit points of Project Management elective units must be completed. These may be taken in either semester.

Note:   Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.

Year 4 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6MECH3460: Mechanical Systems Design 2
6MTRX3700: Mechatronics 3
6MTRX3760: Mechatronic Systems Design
6PMGT3855: Project Variance Analysis

Year 5 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6ELEC3204: Power Electronics and Applications
2ENGG4111: Integrated Engineering 4
6AMME4111: Thesis A
6Mechatronic Specialist Electives


Note:  At least 12 credit points of Mechatronic Elective units must be completed. These may be taken in either semester.
6Mechatronic Specialist Electives


Note:  At least 12 credit points of Mechatronic Elective units must be completed. These may be taken in either semester.
0ENGP3000: Professional Engagement Program 3


Note:  New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note:   Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.

Year 5 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6AMME4112: Thesis B
12Select from
Project Management Electives

48cp Majors

Type CP CP From
View complete Program Structure

Note: From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.

You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors

Major in Space Engineering (24cp)

Type CP CP From
Core
6 AERO2705: Space Engineering 1


Note: Replacing ENGG1111
Core
6 AERO3760: Space Engineering 2


Note: Replacing MECH3460
Core
6 AERO4701: Space Engineering 3
6 Select from Unit Block Space Specialist Electives
View complete Program Structure

Note: To be eligible for this major students must complete the 24 cp listed. There are ATAR and WAM (>75%) entry requirements for enrolment in this major.

Block 1 - Space Specialist Electives (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
AERO5700 Space Engineering (Advanced) 6 Semester 1
Semester 2
AMME4710 Computer Vision and Image Processing 6 Semester 2
AMME5520 Advanced Control and Optimisation 6 Semester 1
AMME5790 Introduction to Biomechatronics 6 Semester 2
MECH5720 Sensors and Signals 6 Semester 2
MTRX5700 Experimental Robotics 6 Semester 1

Block 2 - Project Management Electives (Min CP: 18,Max CP: 18)

Unit Code Unit Name CP Sessions Offered
PMGT2800 Project Placement A 6 Semester 1
PMGT2801 Project Placement B 6 Semester 2
PMGT2854 Executing Projects 6 Semester 2
PMGT3856 Sustainability and Knowledge Management 6 Semester 1
PMGT3857 International Project Management 6 Semester 2

Block 3 - Mechatronic Specialist Electives (Min CP: 12,Max CP: 12)

Unit Code Unit Name CP Sessions Offered
AMME4710 Computer Vision and Image Processing 6 Semester 2
AMME5520 Advanced Control and Optimisation 6 Semester 1
AMME5790 Introduction to Biomechatronics 6 Semester 2
MECH5720 Sensors and Signals 6 Semester 2
MTRX5700 Experimental Robotics 6 Semester 1

Block 4 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
CHNG4203 Major Industrial Project 24 Semester 1
Semester 2
CHNG4811 Thesis A 6 Semester 1
Semester 2
CHNG4812 Thesis B 6 Semester 1
Semester 2
CIVL4022 Thesis A 6 Semester 1
Semester 2
CIVL4023 Thesis B 6 Semester 1
Semester 2
ELEC4712 Thesis A 6 Semester 1
Semester 2
ELEC4713 Thesis B 6 Semester 1
Semester 2
ELEC4714 Major Industrial Project 24 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4111 Integrated Engineering 4 2 Semester 1
ENGP1000 Professional Engagement Program 1 0 Semester 1
Semester 2
ENGP2000 Professional Engagement Program 2 0 Semester 1
Semester 2
ENGP3000 Professional Engagement Program 3 0 Semester 1
Semester 2
MATH1002 Linear Algebra 3 Semester 1
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 2
Summer Main
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 5 - Project Management Core (Min CP: 66,Max CP: 66)

Unit Code Unit Name CP Sessions Offered
BUSS1040 Economics for Business Decision Making 6 Semester 1
Semester 2
ENGG1850 Introduction to Project Management 6 Semester 1
ENGG2850 Project Cost and Finance 6 Semester 1
ENGG2851 Project Analytics 6 Semester 1
ENGG2852 Project Based Organisational Behaviour [not offered in 2020] 6 Semester 2
ENGG2855 Project Acceptance 6 Semester 1
ENGG3853 Project Risk Management: Tools & Techniques 6 Semester 1
ENGG3854 Legal Aspects of Projects 6 Semester 1
Semester 2
PMGT1852 Facilitation and Stakeholder Engagement 6 Semester 2
PMGT3855 Project Variance Analysis 6 Semester 2
PMGT3858 Adapting to Project Context 6 Semester 1

Block 6 - Mechatronic Stream Core (Min CP: 108,Max CP: 108)

Unit Code Unit Name CP Sessions Offered
AMME1362 Introduction to Engineering Materials 6 Semester 2
AMME2301 Mechanics of Solids 1 6 Semester 2
AMME2500 Engineering Dynamics 6 Semester 1
AMME3500 System Dynamics and Control 6 Semester 1
ELEC1103 Fundamentals of Electrical and Electronic Engineering 6 Semester 1
ELEC2104 Electronic Devices and Circuits 6 Semester 2
ELEC3204 Power Electronics and Applications 6 Semester 1
ENGG1801 Engineering Computing 6 Semester 1
Int January
ENGG1802 Engineering Mechanics 6 Semester 2
Summer Main
Int January
MECH2400 Mechanical Systems Design 1 6 Semester 2
MECH3460 Mechanical Systems Design 2 6 Semester 2
MECH3660 Manufacturing Engineering 6 Semester 1
MTRX1701 Introduction to Mechatronic Engineering 6 Semester 1
MTRX1702 Mechatronics 1 6 Semester 2
MTRX1705 Introduction to Mechatronic Design 6 Semester 2
MTRX2700 Mechatronics 2 6 Semester 1
MTRX3700 Mechatronics 3 6 Semester 2
MTRX3760 Mechatronic Systems Design 6 Semester 2

Block 7 - Machine Learning Elective units (Max CP: 6)

Unit Code Unit Name CP Sessions Offered
COMP3308 Introduction to Artificial Intelligence 6 Semester 1
COMP5318 Machine Learning and Data Mining 6 Semester 1
Semester 2

Note: Students may complete 6 credit points of Machine Learning Elective in place of a Specialist Elective unit.

Course: Mechatronic / Project Management (2018)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: N/A
Faculty/School: Faculty of Engineering
Years Offered: 2018, 2017, 2016, 2015
Requirements: Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (156 credit points):

► 36 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of Mechatronic stream core units

► 12 credit points of Mechatronic Specialist elective units

Project Management:

► 66 credit points of Project Management core units

► 18 credit points of Project Management elective units

The handbook rules governing this degree are as follows:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

To qualify for the award of the combined degree:

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Project Management

For the Bachelor of Project Management component of a combined degree:

(a) Candidates must complete the core and elective units of study as set out in the Bachelor of Project Management Unit of Study Table.

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/
Report Type: