Note: This course version is currently under review and is subject to change.
ProgramsEngBE Hons 2015+BE Hons CombinedBE Hons/BMedSciFFY2015/MedScFlexible First Year 2016+ / Medical Science (2017)
Show information forcommencing students (ie. started First Year then).
The course requirements described here apply to persons who commenced their candidature after 1 January, 2017 and persons who commenced their candidature prior to 1 January, 2017 who elect to proceed under 2017 resolutions.
Candidates who commenced prior to 1 January, 2017 may complete the requirements in accordance with the resolutions in force at the time of their commencement, provided that requirements are completed by 1 January, 2022, or later date as the faculty may, in special circumstances, approve.
Candidates who first commenced in 2017, and are re-enrolling for 2018 or later, should be aware that there may have been changes in units of study offered since, Check that units are still available by clicking the unit of study link in the course table. See 2017 version of this course for up to date unit of study list.
For details of relevant resolutions see faculty handbook at sydney.edu.au/handbooks.
Faculty of Engineeringengineering.undergraduate@sydney.edu.au
Print View | Download as PDF Administrative Information (Fees, ATAR etc.)
Select plan for Major/Pathway
Year 1 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | CHEM1101: Chemistry 1A | |
| 6 | ENGG1800: Introduction to Engineering Disciplines | |
| 3 | MATH1001: Differential Calculus | |
| 6 | ENGG1111: Integrated Engineering 1 | |
| 3 | MATH1002: Linear Algebra |
Note: ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students. MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.
Students choose a stream of engineering to undertake at the end of Semester 1. In semester 2 they then follow the program for that particular engineering stream.
Year 1 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | CHEM1102: Chemistry 1B | |
| 6 | ENGG1000: History and Philosophy of Engineering | |
| 6 | ENGG1802: Engineering Mechanics | |
| 3 | MATH1005: Statistics | |
| 3 | MATH1003: Integral Calculus and Modelling |
Note: MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.
This semester`s units should only be used as an enrolment guide. The selection of the stream is required at the end of Semester 1, in which case your enrolment should follow the selected Stream. Note that the MATH units will remain regardless of the selected stream.
Block 1 - Engineering Core (Min CP: 18,Max CP: 18)
| Unit Code | Unit Name | CP | Sessions Offered |
| ENGG1111 | Integrated Engineering 1 | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| MATH1001 | Differential Calculus | 3 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
Summer Main
Summer School
|
| MATH1002 | Linear Algebra | 3 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
Summer Main
Summer School
|
| MATH1003 | Integral Calculus and Modelling | 3 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
Summer Main
Summer School
|
| MATH1005 | Statistics | 3 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
Summer Main
Summer School
|
| MATH1901 | Differential Calculus (Advanced) | 3 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| MATH1902 | Linear Algebra (Advanced) | 3 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| MATH1903 | Integral Calculus and Modelling Advanced | 3 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| MATH1905 | Statistics (Advanced) | 3 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
Block 2 - Flexible First Year units (Min CP: 18,Max CP: 30)
| Unit Code | Unit Name | CP | Sessions Offered |
| ENGG1000 | History and Philosophy of Engineering | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| ENGG1800 | Introduction to Engineering Disciplines | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| ENGG1801 | Engineering Computing | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
Int January
101 - Int January
|
| ENGG1802 | Engineering Mechanics | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
Summer Main
Summer School
Int January
101 - Int January
|
| ENGG1813 | Engineering Critical Thinking | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
Block 3 - Medical Science Core (Min CP: 12,Max CP: 12)
| Unit Code | Unit Name | CP | Sessions Offered |
| CHEM1101 | Chemistry 1A | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
Summer Main
Summer School
|
| CHEM1102 | Chemistry 1B | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
Summer Main
Summer School
|
| Course: | Flexible First Year 2016+ / Medical Science (2017) |
| CP Required: | 48 |
| Min FT Duration: | 1.00 Years |
| Min PT Duration: | N/A |
| Faculty/School: | Faculty of Engineering |
| Years Offered: | 2017, 2016 |
| Requirements: | To qualify for the award of the combined degree: (a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified in the following clauses. (b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree. Requirements for the Bachelor of Engineering For the Bachelor of Engineering component of a combined degree: (a) The units of study that may be taken for the Bachelor of Engineering component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering single degree; (b) Except where approved, all candidates must complete a minimum of 144 credit points comprising: (i) 36cp from the Engineering Core Table, including all required units; (ii) 108cp from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units; (c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream. Requirements for the Bachelor of Medical Science For the Bachelor of Medical Science component of a combined degree: (a) The units of study that may be taken are listed in Table IV for the Bachelor of Medical Science from the Faculty of Science. (b) The mathematics requirement for the Bachelor of Engineering component of the combined degree will also satisfy the mathematics requirements for the Bachelor of Medical Science component. (c) Candidates must complete 96 credit points of units including: (i) A minimum of 24 credit points from junior Science units of study, including: - 12 credit points from Chemistry; and - MBLG1001/1901/1991 Introductory Molecular Biology and Genetics; and - 6 credit points of Junior Biology; (ii) 48 credit points from intermediate Science units of study, comprising: - 36 credit points of BMED240# units from Table IV (B) for the Bachelor of Medical Science; and - MBLG2#71 Molecular Biology and Genomics; and - MBLG2#72 Genetics and Genomics. (iii) A minimum of 24 credit points of senior Science units of study selected from the Bachelor of Medical Science Table IV (C). Optional Science Major The completion of a Science major through selection of appropriate Senior Science units is possible as part of the Engineering/Medical Science combined degree, but not required. Any student who satisfies the requirements of a Science major through the Science units taken as part of the combined degree shall have that major recorded on the Bachelor of Medical Science testamur at the completion of the degree. Medical Science Honours Honours in Medical Science requires the completion of one additional full time year of study. Admission and award requirements for honours in the Bachelor of Medical Science are listed in the resolutions of the Faculty of Science. Candidates for the award of the Bachelor of Medical Science (Honours) who do not meet the requirements, and who have not already graduated, will be awarded the Bachelor of Medical Science pass degree. Engineering Honours Requirements (a) an EWAM of at least 65 immediately prior to the semester in which a thesis unit of study is first attempted; and (b) have an EIHWAM of at least 65 at the completion of the degree; and (c) complete the requirements within a time limit of 5 years for a single Bachelor of Engineering Honours degree or complete the requirements within a time limit of 6 years for a combined Bachelor of Engineering Honours combined degree. Candidates who satisfy the requirements for the Engineering degree, but who have not satisfied each of Clauses (a), (b) and (c), will qualify for the award of the Bachelor of Engineering degree (i.e. the PASS degree, awarded without Honours). Advanced units in Maths and Science Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling. Study Abroad Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units. Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study. Faculty Resolutions Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/ |
Report Type:
