ProgramsEngBE2014 BEMechatronic (Space) (till 2014) (2013)
Show information forcommencing students (ie. started First Year then).
The course requirements described here apply to persons who commenced their candidature after 1 January, 2013 and persons who commenced their candidature prior to 1 January, 2013 who elect to proceed under 2013 resolutions.
Candidates who commenced prior to 1 January, 2013 may complete the requirements in accordance with the resolutions in force at the time of their commencement, provided that requirements are completed by 1 January, 2018, or later date as the faculty may, in special circumstances, approve.
Candidates who first commenced in 2013, and are re-enrolling for 2014 or later, should be aware that there may have been changes in units of study offered since, Check that units are still available by clicking the unit of study link in the course table. See 2014 version of this course for up to date unit of study list.
For details of relevant resolutions see faculty handbook at sydney.edu.au/handbooks.
Print View | Download as PDF Administrative Information (Fees, ATAR etc.)
Year 1 - Semester 1
| Type | CP | CP From |
Core | 6 | ELEC1103: Fundamentals of Electrical and Electronic Engineering |
Core | 6 | ENGG1801: Engineering Computing Note: INFO1103 is an acceptable alternate. |
Core | 3 | MATH1001: Differential Calculus |
Core | 3 | MATH1002: Linear Algebra |
Core | 6 | MTRX1701: Introduction to Mechatronic Engineering |
Year 1 - Semester 2
| Type | CP | CP From |
Core | 6 | AMME1550: Dynamics 1 |
Core | 6 | ENGG1802: Engineering Mechanics |
Core | 3 | MATH1003: Integral Calculus and Modelling |
Core | 3 | MATH1005: Statistics |
Core | 6 | MTRX1702: Mechatronics 1 |
Year 2 - Semester 1
| Type | CP | CP From |
Core | 6 | AMME2302: Materials 1 |
Core | 6 | AMME2500: Engineering Dynamics |
Core | 6 | MATH2067: DEs and Vector Calculus for Engineers |
Core | 6 | MTRX2700: Mechatronics 2 |
Year 2 - Semester 2
| Type | CP | CP From |
Core | 6 | AERO2705: Space Engineering 1 |
Core | 6 | AMME2301: Mechanics of Solids 1 |
Core | 6 | ELEC2104: Electronic Devices and Circuits |
Core | 6 | MECH2400: Mechanical Design 1 |
Year 3 - Semester 1
| Type | CP | CP From |
Core | 6 | AMME3500: System Dynamics and Control |
Core | 6 | ELEC3204: Power Electronics and Applications |
Core | 6 | ELEC3404: Electronic Circuit Design |
Core | 6 | MECH3660: Manufacturing Engineering |
Year 3 - Semester 2
| Type | CP | CP From |
Core | 6 | AMME2200: Introductory Thermofluids |
Core | 6 | AERO3760: Space Engineering 2 |
Core | 6 | MECH3661: Engineering Management |
Core | 6 | MTRX3700: Mechatronics 3 |
Year 4 - Semester 1
| Type | CP | CP From |
Core | 6 | AERO4701: Space Engineering 3 |
Core | 6 | AMME4111: Thesis A Note: Under the change of rules in 2015 and for AQF and accreditation compliance, students should enrol in AMME4111 /AMME4112 |
Core | 0 | ENGG4000: Practical Experience |
Core | 6 | MECH4601: Professional Engineering 2 |
List | 6 | Select from Mechtronics Recommended Electives free electives Note: At least 12 credit points of Mechatronics elective units must be completed across the degree as a whole. These may be taken in either first or second semester. |
Year 4 - Semester 2
| Type | CP | CP From |
Core | 6 | AMME4112: Thesis B Note: Under the change of rules in 2015 and for AQF and accreditation compliance, students should enrol in AMME4111 /AMME4112 |
List | 18 | Select from Mechtronics Recommended Electives free electives Note: At least 12 credit points of Mechatronics elective units must be completed across the degree as a whole. These may be taken in either first or second semester. |
Honours Thesis
| Type | CP | CP From |
Core
|
6 |
AMME4111: Thesis A |
Core
|
6 |
AMME4112: Thesis B |
| View complete Program Structure | ||
Note: Students with ISWAM of 65% or greater are eligible for Honours pathway and can replace 4th Year Engineering Project units AMME4121 and AMME4122 with Honours Thesis Units AMME4111 and AMME4112.
Block 1 - Mechtronics Recommended Electives
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME4500 | Guidance, Navigation and Control | 6 | |
| AMME4710 | Computer Vision and Image Processing | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| AMME4790 | Introduction to Biomechatronics | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| MECH4720 | Sensors and Signals | 6 | |
| MTRX4700 | Experimental Robotics | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
Note: Choice of electives as shown in the above table will depend on subject availability, timetabling and prerequisite conditions. Units of study not included in this table may also be selected subject to the approval of the Head of School Aerospace, Mechanical and Mechatronic Engineering.
Block 2 - free electives (Min CP: 12,Max CP: 12)
Note: 12 credits of elective units can be chosen from units given by departments within the faculty. Additional electives may be chosen subject to the approval of the Head of School.
| Course: | Mechatronic (Space) (till 2014) (2013) |
| CP Required: | 192 |
| Min FT Duration: | 4.00 Years |
| Min PT Duration: | N/A |
| Faculty/School: | University Archive |
| Years Offered: | 2014, 2013, 2012, 2011, 2010 |
| Requirements: | Candidates for the degree of Bachelor of Engineering in Mechatronic Engineering (Space Engineering) are required to gain credit for the core units of study set out below. Any additional credit necessary shall be gained by completing additional credit points of elective units of study as recommended by the Faculty, as may be necessary to gain credit for a total of not less than 192 credit points. Acceptable alternative units of study Students in the Honours program must enrol in AMME4111 & AMME4112, students in the Pass program must enrol in AMME4121 & AMME4122. Most units of study offered by the Science Faculty shown in the tables can be replaced by an equivalent advanced level unit, subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling. Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units. Resolutions of the Faculty of Engineering relating to this table: BE(Mechatronic Engineering)(Space) In addition to gaining credit for the units of study set out in the above table, candidates are required to complete 12 credit points from the table of recommended elective units of study for Mechatronic (Space) Engineering. A minimum of 192 credit points is required to be eligible for the award of BE(Mechatronic)(Space). |
