Note: This course version is currently under review and is subject to change.
ProgramsEngBE HonsBE Hons CombinedBE Hons/BPM ( -2018)Mechatronic / Project Management (2015)
Show information forcommencing students (ie. started First Year then).
The course requirements described here apply to persons who commenced their candidature after 1 January, 2015 and persons who commenced their candidature prior to 1 January, 2015 who elect to proceed under 2015 resolutions.
Candidates who commenced prior to 1 January, 2015 may complete the requirements in accordance with the resolutions in force at the time of their commencement, provided that requirements are completed by 1 January, 2020, or later date as the faculty may, in special circumstances, approve.
Candidates who first commenced in 2015, and are re-enrolling for 2016 or later, should be aware that there may have been changes in units of study offered since, Check that units are still available by clicking the unit of study link in the course table. See 2018 version of this course for up to date unit of study list.
For details of relevant resolutions see faculty handbook at sydney.edu.au/handbooks.
Print View | Download as PDF Administrative Information (Fees, ATAR etc.)
Year 1 - Semester 1
Type | CP | CP From |
Core | 6 | ENGG1801: Engineering Computing |
Core | 6 | ENGG1850: Introduction to Project Management |
Core | 3 | MATH1001: Differential Calculus Note: This unit is discontinued from 2018. Replacement unit is MATH1021. |
Core | 3 | MATH1002: Linear Algebra |
Core | 6 | MTRX1701: Introduction to Mechatronic Engineering |
Year 1 - Semester 2
Type | CP | CP From |
Core | 6 | AMME1362: Introduction to Engineering Materials |
Core | 6 | ENGG1802: Engineering Mechanics |
Core | 3 | MATH1003: Integral Calculus and Modelling Note: This unit is discontinued from 2018. Replacement unit is MATH1023. |
Core | 3 | MATH1005: Statistical Thinking with Data |
Core | 6 | PSYC1002: Psychology 1002 |
Year 2 - Semester 1
Type | CP | CP From |
Core | 6 | BUSS1040: Economics for Business Decision Making |
Core | 6 | ELEC1103: Fundamentals of Electrical and Electronic Engineering |
Core | 6 | AMME2500: Engineering Dynamics |
Core | 6 | MATH2067: DEs and Vector Calculus for Engineers Note: MATH2067 is discontinued from 2018. Replacement unit is MATH2021. |
Year 2 - Semester 2
Type | CP | CP From |
Core | 6 | MTRX1702: Mechatronics 1 |
Core | 6 | ELEC2104: Electronic Devices and Circuits |
Core | 6 | ENGG2852: Project Based Organisational Behaviour [not offered in 2020] |
Core | 6 | ENGG2855: Project Acceptance |
Year 3 - Semester 1
Type | CP | CP From |
Core | 6 | ENGG2850: Project Cost and Finance |
Core | 6 | ENGG2851: Project Analytics |
Core | 6 | MTRX2700: Mechatronics 2 |
Core | 6 | ELEC3404: Electronic Circuit Design |
Year 3 - Semester 2
Type | CP | CP From |
Core | 6 | AMME2301: Mechanics of Solids 1 |
Core | 6 | MECH2400: Mechanical Systems Design 1 |
Core | 6 | ENGG3854: Legal Aspects of Projects |
Core | 6 | PMGT3855: Project Variance Analysis |
Year 4 - Semester 1
Type | CP | CP From |
Core | 6 | AMME3500: System Dynamics and Control |
Core | 6 | ENGG3853: Project Risk Management: Tools & Techniques |
Core | 6 | MECH3660: Manufacturing Engineering |
Core | 6 | PMGT3858: Adapting to Project Context |
Year 4 - Semester 2
Type | CP | CP From |
Core | 6 | MECH3460: Mechanical Systems Design 2 |
Core | 6 | MTRX3700: Mechatronics 3 |
6 | Mechatronic Electives Note: At least 30 credit points of Mechatronic Elective units must be completed. These may be taken in either semester. | |
6 | PM Electives Note: At least 12 credit points of Project Management elective units must be completed. These may be taken in either semester. |
Year 5 - Semester 1
Type | CP | CP From |
Core | 6 | AMME4111: Thesis A |
Core | 0 | ENGG4000: Practical Experience |
Core | 6 | MECH4601: Professional Engineering 2 |
6 | Mechatronic Electives Note: At least 30 credit points of Mechatronic Elective units must be completed. These may be taken in either semester. | |
6 | PM Electives Note: At least 12 credit points of Project Management elective units must be completed. These may be taken in either semester. |
Year 5 - Semester 2
Type | CP | CP From |
Core | 6 | AMME4112: Thesis B |
18 | Select from Mechatronic Electives Note: At least 30 credit points of Mechatronic Elective units must be completed. These may be taken in either semester. |
Block 2 - PM Electives (Min CP: 12,Max CP: 12)
Unit Code | Unit Name | CP | Sessions Offered |
PMGT2854 | Executing Projects | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
PMGT3856 | Sustainability and Knowledge Management | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
PMGT3857 | International Project Management | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
Block 3 - Mechatronic Electives (Min CP: 30,Max CP: 30)
Unit Code | Unit Name | CP | Sessions Offered |
AMME4710 | Computer Vision and Image Processing | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
AMME4790 | Introduction to Biomechatronics | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
AMME5520 | Advanced Control and Optimisation | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
MECH5720 | Sensors and Signals | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
MTRX5700 | Experimental Robotics | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
Note: AMME4790 has been replaced by AMME5790 from 2017
Course: | Mechatronic / Project Management (2015) |
CP Required: | 240 |
Min FT Duration: | 5.00 Years |
Min PT Duration: | N/A |
Faculty/School: | Faculty of Engineering |
Years Offered: | 2018, 2017, 2016, 2015 |
Requirements: | 1. To qualify for the award of the combined degree, a candidate must successfully complete 240 credit points, comprising: (a) The core units of study as set out in the Bachelor of Project Management unit of study table; (b) The units of study specified for the relevant stream of Engineering and (c) Any additional elective units of study as may be necessary to gain credit to co mplete the requirements of the degree. 2. Candidates are required to achieve a minimum HWAM (Honours Weighted Average Mark) of 65% to qualify for the Engineering Honours degree. Students who satisfy all requirements for graduation except the HWAM required for honours will be awarded the PASS degree Bachelor of Engineering. NOTE: This course outline should be read in conjunction with the course rules specified in the Faculty handbook at http://sydney.edu.au/handbooks/ |