Note: This course version is currently under review and is subject to change.
ProgramsEngMEME(2012)Master of Engineering (Mechanical) (2011)
Show information forcommencing students (ie. started First Year then).
The course requirements described here apply to persons who commenced their candidature after 1 January, 2011 and persons who commenced their candidature prior to 1 January, 2011 who elect to proceed under 2011 resolutions.
Candidates who commenced prior to 1 January, 2011 may complete the requirements in accordance with the resolutions in force at the time of their commencement, provided that requirements are completed by 1 January, 2016, or later date as the faculty may, in special circumstances, approve.
Candidates who first commenced in 2011, and are re-enrolling for 2012 or later, should be aware that there may have been changes in units of study offered since, Check that units are still available by clicking the unit of study link in the course table. See 2012 version of this course for up to date unit of study list.
For details of relevant resolutions see faculty handbook at sydney.edu.au/handbooks.
Print View | Download as PDF Administrative Information (Fees, ATAR etc.)
Year 1 - Semester 1
Type | CP | CP From |
12 | Select from AERO5660: Safety Systems Management AMME5601: Professional Engineering Note: Candidates must complete both these units (unless taking Research Pathway). Research Pathway Candidates instead take either ENGG5220 plus ENGG5221 Engineering Project A and B (2x6 credit points) OR ENGG5219 (12 credit points). See Streams for more details of Research Pathway. | |
12 | Select from Specialist Units Note: Candidates must complete 36 credit points of Specialist Units across the degree as a whole. |
Year 1 - Semester 2
Type | CP | CP From |
24 | Select from Specialist Units Note: Candidates must complete 36 credit points from these units across the degree as a whole. |
Research Pathway
Type | CP | CP From |
12 |
Select from
ENGG5219: Research Project ENGG5220: Engineering Project A ENGG5221: Engineering Project B |
|
View complete Program Structure |
Note:
1. School permission is required to complete this pathway.
2. Admission to this pathway is determinded by obtaining a distinction (WAM 75 or higher) average in the first 24 credits of their ME studies.
3. Candidates must complete both ENGG5220 Engineering Project A and ENGG5221 Engineering Project B across two semesters (2 x 6 credit points) OR ENGG5219 in a single semester.
Block 1 - Specialist Units (Min CP: 36,Max CP: 48)
Unit Code | Unit Name | CP | Sessions Offered |
AERO5200 | Advanced Aerodynamics | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
AERO5301 | Applied Finite Element Analysis | 6 | |
AERO5400 | Advanced Aircraft Design Analysis | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
AERO5500 | Flight Mechanics Test and Evaluation Adv [not currently running] | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
AERO5760 | Spacecraft and Satellite Design | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
AMME5101 | Energy and the Environment | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
AMME5202 | Computational Fluid Dynamics | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
AMME5271 | Computational Nanotechnology | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
AMME5301 | Foundations of Mechanics of Solids 1 | 6 | |
AMME5602 | Product Life Cycle Design | 6 | |
AMME5912 | Crash Analysis and Design | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
AMME5921 | Biomedical Engineering Technology 2 | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
AMME5961 | Biomechanics and Biomaterials | 6 | |
AMME5971 | Applied Tissue Engineering | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
AMME5981 | Computational Biomedical Engineering | 6 | |
AMME5990 | Biomedical Engineering Technology 1 | 6 | |
MECH5255 | Air Conditioning and Refrigeration | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
MECH5265 | Combustion | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
MECH5275 | Renewable Energy | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
MECH5305 | Smart Materials | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
MECH5310 | Advanced Engineering Materials | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
MECH5416 | Design of Micro- and Nanosystems | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
MECH5701 | Computers in Real Time Control and Instrumentation | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
MECH5720 | Sensors and Signals | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
MTRX5700 | Experimental Robotics | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
Note: A minimum of 36 credit points must be completed from these units.
Block 2 - Professional Pathway Units (Min CP: 12,Max CP: 12)
Unit Code | Unit Name | CP | Sessions Offered |
AERO5660 | Safety Systems Management | 6 | |
AMME5601 | Professional Engineering | 6 |
Note: Candidates must complete both these units (unless taking Research Pathway). Research Pathway Candidates take ENGG5220 and ENGG5221 (Engineering Project A and B) instead.
Block 3 - Research Pathway (Max CP: 12)
Unit Code | Unit Name | CP | Sessions Offered |
ENGG5219 | Research Project | 12 | |
ENGG5220 | Engineering Project A | 6 | |
ENGG5221 | Engineering Project B | 6 |
Note:
1. School permission is required to complete this pathway.
2. Admission to this pathway is determinded by obtaining a distinction (WAM 75 or higher) average in the first 24 credits of their ME studies.
3. Candidates must complete both ENGG5220 Engineering Project A and ENGG5221 Engineering Project B across two semesters (2 x 6 credit points) OR ENGG5219 in a single semester.
Course: | Master of Engineering (Mechanical) (2011) |
CP Required: | 48 |
Min FT Duration: | 1.00 Years |
Min PT Duration: | 2.00 Years |
Faculty/School: | University Archive |
Years Offered: | 2012, 2011 |
Requirements: | A Master of Engineering (Mechanical) degree requires the completion of 48 credit points, including 36 credit points of Specialists Units and 12 credit points of Professional Pathway Units from the lists given. This can be achieved by one year full time or two (or more) years part time study. |