ProgramsEngBE2014 BEMechatronic (till 2014) (2012)
Show information forcommencing students (ie. started First Year then).
The course requirements described here apply to persons who commenced their candidature after 1 January, 2012 and persons who commenced their candidature prior to 1 January, 2012 who elect to proceed under 2012 resolutions.
Candidates who commenced prior to 1 January, 2012 may complete the requirements in accordance with the resolutions in force at the time of their commencement, provided that requirements are completed by 1 January, 2017, or later date as the faculty may, in special circumstances, approve.
Candidates who first commenced in 2012, and are re-enrolling for 2013 or later, should be aware that there may have been changes in units of study offered since, Check that units are still available by clicking the unit of study link in the course table. See 2014 version of this course for up to date unit of study list.
For details of relevant resolutions see faculty handbook at sydney.edu.au/handbooks.
Print View | Download as PDF Administrative Information (Fees, ATAR etc.)
Year 1 - Semester 1
| Type | CP | CP From |
Core | 6 | ELEC1103: Fundamentals of Electrical and Electronic Engineering |
Core | 6 | ENGG1801: Engineering Computing Note: INFO1103 is an acceptable alternate. |
Core | 3 | MATH1001: Differential Calculus |
Core | 3 | MATH1002: Linear Algebra |
Core | 6 | MTRX1701: Introduction to Mechatronic Engineering |
Year 1 - Semester 2
| Type | CP | CP From |
Core | 6 | AMME1550: Dynamics 1 |
Core | 6 | ENGG1802: Engineering Mechanics |
Core | 3 | MATH1003: Integral Calculus and Modelling |
Core | 3 | MATH1005: Statistical Thinking with Data |
Core | 6 | MTRX1702: Mechatronics 1 |
Year 2 - Semester 1
| Type | CP | CP From |
Core | 6 | AMME2302: Materials 1 |
Core | 6 | AMME2500: Engineering Dynamics |
Core | 6 | MATH2061: Linear Mathematics and Vector Calculus |
Core | 6 | MTRX2700: Mechatronics 2 |
Year 2 - Semester 2
| Type | CP | CP From |
Core | 6 | AMME2301: Mechanics of Solids 1 |
Core | 6 | ELEC2104: Electronic Devices and Circuits |
Core | 6 | MATH2065: Partial Differential Equations (Intro) |
Core | 6 | MECH2400: Mechanical Design 1 |
Year 3 - Semester 1
| Type | CP | CP From |
Core | 6 | AMME3500: System Dynamics and Control |
Core | 6 | ELEC3204: Power Electronics and Applications |
Core | 6 | ELEC3404: Electronic Circuit Design |
Core | 6 | MECH3660: Manufacturing Engineering |
Year 3 - Semester 2
| Type | CP | CP From |
Core | 6 | AMME2200: Introductory Thermofluids |
Core | 6 | MECH3460: Mechanical Design 2 |
Core | 6 | MECH3661: Engineering Management |
Core | 6 | MTRX3700: Mechatronics 3 |
Year 4 - Semester 1
| Type | CP | CP From |
Core | 6 | AMME4111: Thesis A Note: Under the change of rules in 2015 and for AQF and accreditation compliance, students should enrol in AMME4111 /AMME4112 |
Core | 0 | ENGG4000: Practical Experience |
Core | 6 | MECH4601: Professional Engineering 2 |
| 12 | Select from MECH4720: Sensors and Signals MECH4730: Computers in Real-Time Control and Instrumentation MTRX4700: Experimental Robotics Note: At least 18 credit points of Mechatronics elective units must be completed. These may be taken in either first or second semester. |
Year 4 - Semester 2
| Type | CP | CP From |
Core | 6 | AMME4112: Thesis B Note: Under the change of rules in 2015 and for AQF and accreditation compliance, students should enrol in AMME4111 /AMME4112 |
| 6 | Select from AMME4500: Guidance, Navigation and Control AMME4700: Inertial Navigation and the Kalman Filter AMME4710: Computer Vision and Image Processing AMME4790: Introduction to Biomechatronics Note: At least 18 credit points of Mechatronics elective units must be completed. These may be taken in either first or second semester. | |
Elective | 12 | Electives. Note: At least 12 credit points of elective units must be completed. These may be taken in either first or second semester. |
Honours Thesis
| Type | CP | CP From |
Core
|
6 |
AMME4111: Thesis A |
Core
|
6 |
AMME4112: Thesis B |
| View complete Program Structure | ||
Note: Students with ISWAM of 65% or greater are eligible for Honours pathway and can replace 4th Year Engineering Project units AMME4121 and AMME4122 with Honours Thesis Units AMME4111 and AMME4112.
Block 1 - Mechatronics Recommended Electives
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME4500 | Guidance, Navigation and Control | 6 | |
| AMME4700 | Inertial Navigation and the Kalman Filter | 6 | |
| AMME4710 | Computer Vision and Image Processing | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| AMME4790 | Introduction to Biomechatronics | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| MECH4720 | Sensors and Signals | 6 | |
| MECH4730 | Computers in Real-Time Control and Instrumentation | 6 | |
| MTRX4700 | Experimental Robotics | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| Course: | Mechatronic (till 2014) (2012) |
| CP Required: | 192 |
| Min FT Duration: | 4.00 Years |
| Min PT Duration: | N/A |
| Faculty/School: | University Archive |
| Years Offered: | 2014, 2013, 2012, 2011, 2010 |
| Requirements: | Most units of study offered by the Science Faculty shown above can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling. Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units. All candidates are required to complete a minimum of 192 credit points and a Practical Experience period to be eligible for the award of the degree of BE(Mechatronics). Students are required to complete a minimum of 18 credits of recommended 4th year units. Students in the Honours program must enrol in AMME4111 & AMME4112; students in the Pass program must enrol in AMME4121 & AMME4122. |
