ProgramsEngENGI (PG)MPE/MPEAMPEMPE to 2024Master of Professional Engineering (Civil) (2011)
Show information forcommencing students (ie. started First Year then).
The course requirements described here apply to persons who commenced their candidature after 1 January, 2011 and persons who commenced their candidature prior to 1 January, 2011 who elect to proceed under 2011 resolutions.
Candidates who commenced prior to 1 January, 2011 may complete the requirements in accordance with the resolutions in force at the time of their commencement, provided that requirements are completed by 1 January, 2016, or later date as the faculty may, in special circumstances, approve.
Candidates who first commenced in 2011, and are re-enrolling for 2012 or later, should be aware that there may have been changes in units of study offered since, Check that units are still available by clicking the unit of study link in the course table. See 2024 version of this course for up to date unit of study list.
For details of relevant resolutions see faculty handbook at sydney.edu.au/handbooks.
Print View | Download as PDF Administrative Information (Fees, ATAR etc.)
Year 1 - Semester 1
Year 1 - Semester 2
Type | CP | CP From |
Core | 6 | CIVL5508: Foundations of Steel Structures 1 |
Core | 6 | ENGG5205: Professional Practice in Project Management |
12 | Select from Specialist Electives |
Year 2 - Semester 1
Type | CP | CP From |
Core | 0 | ENGG5217: Practical Experience |
Core | 6 | ENGG5220: Engineering Project A Note: Students achieving an average mark of 75% or higher in their first 48 credits of MPE are eligible for the Research pathway and may replace ENGG5220 and 6cp of Year 2, Sem 1 electives with ENGG5222 Dissertation A. |
12 | Select from Advanced Electives | |
6 | Specialist Electives |
Year 2 - Semester 2
Type | CP | CP From |
Core | 6 | CIVL5510: Foundations of Civil Engineering Design |
Core | 6 | ENGG5221: Engineering Project B Note: Students achieving an average mark of 75% or higher in their first 48 credits of MPE are eligible for the Research pathway and may replace ENGG5221 and 6cp of Yr 2, Sem 2 electives with ENGG5223 Dissertation B. |
12 | Select from Advanced Electives |
Engineering Project - Single Semester Option
Type | CP | CP From |
Core
|
12 |
ENGG5219: Research Project |
View complete Program Structure |
Note: Engineering Project must be completed by all students, unless undertaking Research Pathway (conditions below). Engineering Project is normally completed across two semesters in two stages through ENGG5220 (6cp) and ENGG5221 (6cp). However, it may also be completed in a single semester through ENGG5219 (12 cp).
Engineering Project - Two Semester Option
Type | CP | CP From |
Core
|
6 |
ENGG5220: Engineering Project A |
Core
|
6 |
ENGG5221: Engineering Project B |
View complete Program Structure |
Note: Engineering Project must be completed by all students, unless undertaking Research Pathway (conditions below). Engineering Project is normally completed across two semesters in two stages through ENGG5220 (6cp) and ENGG5221 (6cp). However, it may also be completed in a single semester through ENGG5219 (12 cp).
Research Pathway
Type | CP | CP From |
Core
|
12 |
ENGG5222: Dissertation A |
Core
|
12 |
ENGG5223: Dissertation B |
View complete Program Structure |
Note: Research pathway students take Dissertation units ENGG5222 and ENGG5223 (total 24 cp) in place of Engineering Project units ENGG5220 and 12 cp of elective units. Students achieving an average mark of 75% or higher in their first 48 credits of MPE are eligible for the Research pathway.
Block 1 - Specialist Electives (Min CP: 18,Max CP: 18)
Unit Code | Unit Name | CP | Sessions Offered |
CIVL5266 | Steel Structures - Stability | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5269 | Advanced Concrete Structures | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5351 | Geoenvironmental Engineering | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5452 | Geotechnical Engineering 2 | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5458 | Numerical Methods in Civil Engineering | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5513 | Foundations of Structural Analysis | 6 | |
CIVL5514 | Foundations of Geotechnical Engineering | 6 | |
CIVL5665 | Advanced Water Resources Engineering | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5670 | Reservoir, Stream and Coastal Engineering | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
Note: Students must complete 18 credit points from the units listed across the two years of the degree.
Block 2 - Advanced Electives (Min CP: 24,Max CP: 24)
Unit Code | Unit Name | CP | Sessions Offered |
CHNG5005 | Wastewater Engineering | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5257 | Concrete Structures - Prestressed Concrete | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5264 | Composite Steel-Concrete Structures | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5267 | Steel Structures - Advanced Analysis and Design | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5268 | Structural Dynamics | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5450 | Analysis and Design of Pile Foundations | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5451 | Numerical and Computer Methods in Geotechnical Engineering | 6 | |
CIVL5454 | Rock Engineering | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5455 | Engineering Behaviour of Soils | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5666 | Open Channel Flow & Hydraulic Structures | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5668 | Fundamentals of Wind Engineering for Design | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5669 | Applied Fluid Engineering Computing | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
Note: Students must complete 24 credit points from the units listed across Year 2.
Course: | Master of Professional Engineering (Civil) (2011) |
CP Required: | 144 |
Min FT Duration: | 3.00 Years |
Min PT Duration: | N/A |
Faculty/School: | Faculty of Engineering |
Years Offered: | 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2010 |
Requirements: |