University Archive

Civil (Construction Management) (till 2014) (2014)


Note: This course version applies only to students first enrolling in 2014.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Civil (Construction Management) (till 2014) (2014)
CP Required: 192
Min FT Duration: 4.00 Years
Min PT Duration: N/A
Faculty/School: University Archive
Years Offered: 2014, 2013, 2012, 2011

2. Requirements

This course outline should be read in conjunction with the Handbook for the Bachelor of Engineering: http://sydney.edu.au/handbooks/engineering/

Candidates are required to complete 192 credit points made up as follows:

(a) 144 credit points of core Civil Units.

and

(b) at least 18 credit points of 3rd year Civil electives,

and

(c) at least 18 credit points of 4th year Civil electives,

and

(d) no more than 12 credit points of "Additional Electives"

Additional Electives

Candidates must complete 12 credit points of additional elective units of study. These are also called "free electives". They may be any combination of units from any of the Second Year, Third Year or Fourth Year Civil electives, subjects from other Schools of Engineering, AND/OR from units of study in other Faculties subject to approval from the Director of the Learning and Teaching; Civil Engineering.

Choice of electives will depend upon subject availability, timetabling and prerequisite conditions.

Civil Engineering Specialisation Stream Construction Management

Specialisation in the BE (Civil) degree is available to exceptional students who meet certain progress requirements. To satisfy the specialisation criteria students must be enrolled in the stream and complete at least 3 electives from the Construction Management Stream listed below and undertake an Honours Thesis or Engineering Project in a related topic: Students may enrol in a maximum of 4 electives from the Construction Management stream.

3rd Year (Compulsory): CIVL3805

4th year Choose at least 2 of: CIVL4815, CIVL3813, CIVL4810 and CIVL4814 . Students cannot do more than four units from the Construction Management stream, even as a free elective. CIVL3813 is a 4th year elective, not 3rd year.

(In order to satisfy the requirements for specialisation in Combined degrees the candidate may need to complete more than 240 credit points.)

Other Notes

Students in the Honours program must enrol in CIVL4022 & CIVL4023; students in the Pass Program must enrol in CIVL4024 & CIVL4025.

With special permission from the Director of the Learning and Teaching; Civil Engineering; it is possible to take Thesis or Project A in Semester 2 and Thesis or Project B in Semester 1.

CIVL0011; CIVL0012; CIVL0013; CIVL0014; CIVL0015; CIVL0016; CIVL0017 AND CIVL0018 are available for international exchange study programs.

Most Mathematics; Chemistry; Physics and Computer Science units of study offered by the Faculty of Science can be replaced by an equivalent advanced level units of study subject to prerequisite conditions (as required by the Faculty of Science) being met.

3. Semesters

Year 1 - Semester 1

Type CP CP From
Core
6 ENGG1800: Introduction to Engineering Disciplines
Core
6 ENGG1801: Engineering Computing
Core
3 MATH1001: Differential Calculus
Core
3 MATH1002: Linear Algebra
Core
6 PHYS1001: Physics 1 (Regular)

Year 1 - Semester 2

Type CP CP From
Core
6 ENGG1802: Engineering Mechanics
Core
6 ENGG1803: Professional Engineering 1
Core
6 GEOL1501: Engineering Geology 1
Core
3 MATH1003: Integral Calculus and Modelling
Core
3 MATH1005: Statistics

Year 2 - Semester 1

Type CP CP From
Core
6 CIVL2110: Materials
Core
6 CIVL2201: Structural Mechanics
Core
6 CIVL2810: Engineering Construction and Surveying [no longer running]
Core
6 MATH2061: Linear Mathematics and Vector Calculus

Year 2 - Semester 2

Type CP CP From
Core
6 CIVL2230: Introduction to Structural Concepts and Design
Core
6 CIVL2410: Soil Mechanics
Core
6 CIVL2611: Introductory Fluid Mechanics
6 Select from Unit Block:
Year 2 Electives
or other units.

Year 3 - Semester 1

Type CP CP From
Core
6 CIVL3010: Sustainable Systems Engineering
Core
6 CIVL3205: Concrete Structures 1
Core
6 CIVL3612: Fluid Mechanics
Core
6 CIVL3812: Project Appraisal

Year 3 - Semester 2

Type CP CP From
Core
6 CIVL3206: Steel Structures 1
12 Select from Unit Block:
Other Year 3 Electives
6 Select from CIVL3805: Project Scope, Time and Cost Management

Year 4 - Semester 1

Type CP CP From
Core
6 CIVL4024: Engineering Project A


Note: Students with ISWAM of 65% or greater are eligible for Honours pathway and can replace CIVL4024 with CIVL4022.
Core
6 CIVL4811: Engineering Design and Construction
Core
0 ENGG4000: Practical Experience
12 Select from Unit Block:
Year 4 Electives

Year 4 - Semester 2

Type CP CP From
Core
6 CIVL4025: Engineering Project B


Note: Students with ISWAM of 65% or greater are eligible for Honours pathway and can replace CIVL4025 with CIVL4023.
Core
6 CIVL4903: Civil Engineering Design
12 Select from Unit Block:
Year 4 Electives

4. Pathways

1. Honours Thesis

Type CP CP From
Core
6 CIVL4022: Thesis A
Core
6 CIVL4023: Thesis B

Note: Students with ISWAM of 65% or greater are eligible for Honours pathway and can replace Engineering Project units CIVL4024 and COVL4025 with Honours Thesis units CIVL4022 and CIVL4023.

5. Unit Blocks

Block 1 - Compulsory Year 3 Elective for Construction Engineering & Management Stream (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
CIVL3805 Project Scope, Time and Cost Management 6 Semester 1

Block 2 - Year 2 Electives (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
CIVL2511 Research Techniques 6 Semester 2
MATH2065 Partial Differential Equations (Intro) 6 Semester 2
Summer Main
ELECTIVE Free Electives 6  

Note: Block 2 : Select one of these units OR a free elective in Year 2, Semester 2. Free Elective list: http://sydney.edu.au/engineering/civil/current-students/electives.shtml#additional

Block 3 - Other Year 3 Electives (Min CP: 12,Max CP: 12)

Unit Code Unit Name CP Sessions Offered
CIVL3235 Structural Analysis 6 Semester 2
CIVL3411 Geotechnical Engineering 6 Semester 2
CIVL3614 Hydrology 6 Semester 2

Note: Block 3: Choose two of these units.

Note: any non-core CIVL3* unit can be taken as a third year elective.

Block 4 - Year 4 Electives (Min CP: 24,Max CP: 24)

Unit Code Unit Name CP Sessions Offered
CIVL3813 Contracts Formulation and Management 6 Semester 2
CIVL4810 Mgmnt of People, Quality and Risk in PE 6 Semester 2
CIVL4814 Project Procurement and Tendering 6 Semester 2
CIVL4815 Project Formulation 6 Semester 1
CIVL5266 Steel Structures - Stability 6 Semester 1
CIVL5269 Advanced Concrete Structures 6 Semester 2
CIVL5351 Geoenvironmental Engineering 6 Semester 2
CIVL5452 Foundation Engineering 6 Semester 1
CIVL5453 Geotechnical Hazards 6 Semester 2
CIVL5458 Numerical Methods in Civil Engineering 6 Semester 1
CIVL5668 Fundamentals of Wind Engineering for Design 6 Semester 1
CIVL5670 Reservoir, Stream and Coastal Engineering 6 Semester 1
ELECTIVE Free Electives 6  

Note: Block 4: Requirements for the Construction Engineering and Management Stream. You must choose 4 units as follows:

**2 units must be chosen from the Construction Engineering and Management units CIVL4815, CIVL3813, CIVL4810 or CIVL4814.

*1 unit must be any other of the year 4 electives listed above (it can be a Construction Engineering and Management unit).

*1 unit can be any other of the year 4 electives listed above OR a free elective but it cannot be another Construction engineering and Management elective. Students cannot do more than four units from the Construction Engineering and Management stream, even as a free elective. CIVL3813 is a 4th year elective, not 3rd year.

Free Elective list: http://sydney.edu.au/engineering/civil/current-students/electives.shtml#additional