Faculty of Engineering |
Course: | Mechatronic / Project Management (2018) |
CP Required: | 240 |
Min FT Duration: | 5.00 Years |
Min PT Duration: | N/A |
Faculty/School: | Faculty of Engineering |
Years Offered: | 2018, 2017, 2016, 2015 |
Type | CP | CP From |
6 |
Select from
ENGG1801: Engineering Computing |
|
3 |
Select from
MATH1021: Calculus of One Variable |
|
6 |
Select from
ENGG1850: Introduction to Project Management |
|
3 |
Select from
MATH1002: Linear Algebra |
|
6 |
Select from
MTRX1701: Introduction to Mechatronic Engineering |
|
0 |
Select from
ENGP1000: Professional Engagement Program 1 Note: All students must enrol in ENGP1000 in their first semester of enrolment. New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes |
Note: MATH1021 and MATH1002 may be replaced by advanced units MATH1921 and MATH1902.
Type | CP | CP From |
3 |
Select from
MATH1023: Multivariable Calculus and Modelling |
|
6 |
Select from
PMGT1852: Facilitation and Stakeholder Engagement |
|
6 |
Select from
AMME1362: Introduction to Engineering Materials |
|
6 |
Select from
ENGG1802: Engineering Mechanics |
|
3 |
Select from
MATH1005: Statistical Thinking with Data |
Note: MATH1023 and MATH1005 may be replaced by advanced units MATH1923 and MATH1905.
Type | CP | CP From |
6 |
Select from
BUSS1040: Economics for Business Decision Making |
|
6 |
Select from
ELEC1103: Fundamentals of Electrical and Electronic Engineering |
|
6 |
Select from
AMME2500: Engineering Dynamics |
|
6 |
Select from
ENGG1111: Integrated Engineering 1 |
Note: Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
Type | CP | CP From |
6 |
Select from
MTRX1702: Mechatronics 1 |
|
6 |
Select from
ENGG2855: Project Acceptance |
|
6 |
Select from
MTRX1705: Introduction to Mechatronic Design |
|
6 |
Select from
ENGG2852: Project Based Organisational Behaviour [not offered in 2020] Note: This unit is discontinued from 2019. Replacement unit is PMGT2854. |
|
0 |
Select from
ENGP2000: Professional Engagement Program 2 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes |
Type | CP | CP From |
6 |
Select from
ENGG2850: Project Cost and Finance |
|
6 |
Select from
ENGG2851: Project Analytics |
|
6 |
Select from
MTRX2700: Mechatronics 2 |
|
6 |
Select from
AMME3500: System Dynamics and Control |
Type | CP | CP From |
2 |
Select from
ENGG2111: Integrated Engineering 2 |
|
6 |
Select from
MECH2400: Mechanical Systems Design 1 |
|
6 |
Select from
ENGG3854: Legal Aspects of Projects |
|
6 |
Select from
AMME2301: Mechanics of Solids |
|
6 |
Select from
ELEC2104: Electronic Devices and Circuits |
Note: Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
Type | CP | CP From |
2 |
Select from
ENGG3111: Integrated Engineering 3 |
|
6 |
Select from
ENGG3853: Project Risk Management: Tools & Techniques |
|
6 |
Select from
MECH3660: Manufacturing Engineering |
|
6 |
Select from
PMGT3858: Adapting to Project Context |
|
6 |
Select from
Unit Block: Project Management Electives Note: At least 18 credit points of Project Management elective units must be completed. These may be taken in either semester. |
Note: Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
Type | CP | CP From |
6 |
Select from
MECH3460: Mechanical Systems Design 2 |
|
6 |
Select from
MTRX3700: Mechatronics 3 |
|
6 |
Select from
MTRX3760: Mechatronic Systems Design |
|
6 |
Select from
PMGT3855: Project Variance Analysis |
Type | CP | CP From |
6 |
Select from
ELEC3204: Power Electronics and Applications |
|
2 |
Select from
ENGG4111: Integrated Engineering 4 |
|
6 |
Select from
AMME4111: Thesis A |
|
6 |
Select from
Unit Block: Mechatronic Specialist Electives Note: At least 12 credit points of Mechatronic Elective units must be completed. These may be taken in either semester. |
|
6 |
Select from
Unit Block: Mechatronic Specialist Electives Note: At least 12 credit points of Mechatronic Elective units must be completed. These may be taken in either semester. |
|
0 |
Select from
ENGP3000: Professional Engagement Program 3 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes |
Note: Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
Type | CP | CP From |
6 |
Select from
AMME4112: Thesis B |
|
12 |
Select from
Unit Block: Project Management Electives |
Type | CP | CP From |
Note:
From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.
You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors
Type | CP | CP From |
Core
|
6 |
AERO2705: Space Engineering 1 Note: Replacing ENGG1111 |
Core
|
6 |
AERO3760: Space Engineering 2 Note: Replacing MECH3460 |
Core
|
6 |
AERO4701: Space Engineering 3 |
6 |
Select from
Unit Block Space Specialist Electives |
Note: To be eligible for this major students must complete the 24 cp listed. There are ATAR and WAM (>75%) entry requirements for enrolment in this major.
Unit Code | Unit Name | CP | Sessions Offered |
AERO5700 | Space Engineering (Advanced) | 6 |
Semester 1 Semester 2 |
AMME4710 | Computer Vision and Image Processing | 6 |
Semester 2 |
AMME5520 | Advanced Control and Optimisation | 6 |
Semester 1 |
AMME5790 | Introduction to Biomechatronics | 6 |
Semester 2 |
MECH5720 | Sensors and Signals | 6 |
Semester 2 |
MTRX5700 | Experimental Robotics | 6 |
Semester 1 |
Unit Code | Unit Name | CP | Sessions Offered |
PMGT2800 | Project Placement A | 6 |
Semester 1 |
PMGT2801 | Project Placement B | 6 |
Semester 2 |
PMGT2854 | Executing Projects | 6 |
Semester 2 |
PMGT3856 | Sustainability and Knowledge Management | 6 |
Semester 1 |
PMGT3857 | International Project Management | 6 |
Semester 2 |
Unit Code | Unit Name | CP | Sessions Offered |
AMME4710 | Computer Vision and Image Processing | 6 |
Semester 2 |
AMME5520 | Advanced Control and Optimisation | 6 |
Semester 1 |
AMME5790 | Introduction to Biomechatronics | 6 |
Semester 2 |
MECH5720 | Sensors and Signals | 6 |
Semester 2 |
MTRX5700 | Experimental Robotics | 6 |
Semester 1 |
Note:
Complete a minimum of 36cp including:
- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)
- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)
- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)
- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)
Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.
Unit Code | Unit Name | CP | Sessions Offered |
BUSS1040 | Economics for Business Decision Making | 6 |
Semester 1 Semester 2 |
ENGG1850 | Introduction to Project Management | 6 |
Semester 1 |
ENGG2850 | Project Cost and Finance | 6 |
Semester 1 |
ENGG2851 | Project Analytics | 6 |
Semester 1 |
ENGG2852 | Project Based Organisational Behaviour [not offered in 2020] | 6 |
Semester 2 |
ENGG2855 | Project Acceptance | 6 |
Semester 1 |
ENGG3853 | Project Risk Management: Tools & Techniques | 6 |
Semester 1 |
ENGG3854 | Legal Aspects of Projects | 6 |
Semester 1 Semester 2 |
PMGT1852 | Facilitation and Stakeholder Engagement | 6 |
Semester 2 |
PMGT3855 | Project Variance Analysis | 6 |
Semester 2 |
PMGT3858 | Adapting to Project Context | 6 |
Semester 1 |
Unit Code | Unit Name | CP | Sessions Offered |
AMME1362 | Introduction to Engineering Materials | 6 |
Semester 2 |
AMME2301 | Mechanics of Solids | 6 |
Semester 2 |
AMME2500 | Engineering Dynamics | 6 |
Semester 1 |
AMME3500 | System Dynamics and Control | 6 |
Semester 1 |
ELEC1103 | Fundamentals of Electrical and Electronic Engineering | 6 |
Semester 1 |
ELEC2104 | Electronic Devices and Circuits | 6 |
Semester 2 |
ELEC3204 | Power Electronics and Applications | 6 |
Semester 1 |
ENGG1801 | Engineering Computing | 6 |
Semester 1 Int January |
ENGG1802 | Engineering Mechanics | 6 |
Semester 2 Summer Main Int January |
MECH2400 | Mechanical Systems Design 1 | 6 |
Semester 1 |
MECH3460 | Mechanical Systems Design 2 | 6 |
Semester 2 |
MECH3660 | Manufacturing Engineering | 6 |
Semester 1 |
MTRX1701 | Introduction to Mechatronic Engineering | 6 |
Semester 1 |
MTRX1702 | Mechatronics 1 | 6 |
Semester 2 |
MTRX1705 | Introduction to Mechatronic Design | 6 |
Semester 2 |
MTRX2700 | Mechatronics 2 | 6 |
Semester 1 |
MTRX3700 | Mechatronics 3 | 6 |
Semester 2 |
MTRX3760 | Mechatronic Systems Design | 6 |
Semester 2 |
Unit Code | Unit Name | CP | Sessions Offered |
COMP3308 | Introduction to Artificial Intelligence | 6 |
Semester 1 |
COMP5318 | Machine Learning and Data Mining | 6 |
Semester 1 Semester 2 |
Note: Students may complete 6 credit points of Machine Learning Elective in place of a Specialist Elective unit.