1. Overview

Course:	Aeronautical / Project Management (2016)
CP Required:	240
Min FT Duration:	5.00 Years
Min PT Duration:	N/A
Faculty/School:	Faculty of Engineering
Years Offered:	2018, 2017, 2016, 2015

2. Requirements

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (156 credit points):

► 36 credit points of Engineering core units

► 108 credit points of Aeronautical stream core units

► 12 credit points of Aeronautical Specialist elective units

Project Management:

► 66 credit points of Project Management core units

► 18 credit points of Project Management elective units

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering

For the Bachelor of Engineering component of a combined degree:

(a) The units of study that may be taken for the Bachelor of Engineering component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering single degree;

(b) Except where approved, all candidates must complete a minimum of 144 credit points comprising:

(i) 36cp from the Engineering Core Table, including all required units;

(ii) 108cp from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Candidates who do not meet the requirements for the award of the Bachelor of Engineering Honours but who have otherwise satisfied the requirements of the Bachelor of Engineering shall graduate with the Bachelor of Engineering pass degree.

Requirements for the Bachelor of Project Management

For the Bachelor of Project Management component of a combined degree:

(a) Candidates must complete the core units of study as set out in the Bachelor of Project Management Unit of Study Table.

(b) 18cp from the Project Management Electives Table must be completed.

Engineering Honours Requirements

(a) an EWAM of at least 65 immediately prior to the semester in which a thesis unit of study is first attempted; and

(b) have an EIHWAM of at least 65 at the completion of the degree; and

(c) complete the requirements within a time limit of 5 years for a single Bachelor of Engineering Honours degree or complete the requirements within a time limit of 6 years for a combined Bachelor of Engineering Honours combined degree.

Candidates who satisfy the requirements for the Engineering degree, but who have not satisfied each of Clauses (a), (b) and (c), will qualify for the award of the Bachelor of Engineering degree (i.e. the PASS degree, awarded without Honours).

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Majors

A major requires:

(a) the completion of 24 credit points chosen from units of study listed in the table for that major;

(b) satisfying any additional requirements specified for the major, and listed with the table of units for the major;

(c) the completion of a thesis project that has been approved by the Head of School (or delegate) as relevant to the topic of the major.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type	CP	CP From
Engineering Core	3	Select from MATH1001: Differential Calculus Note: This unit is discontinued from 2018. Replacement unit is MATH1021.
Project Management Core	6	Select from ENGG1850: Introduction to Project Management
Engineering Core	3	Select from MATH1002: Linear Algebra
Aeronautical Stream Core	6	Select from ENGG1801: Engineering Computing
Aeronautical Stream Core	6	Select from AERO1560: Introduction to Aerospace Engineering

Note: MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.

Year 1 - Semester 2

Type	CP	CP From
Engineering Core	3	Select from MATH1003: Integral Calculus and Modelling Note: This unit is discontinued from 2018. Replacement unit is MATH1023.
Project Management Core	6	Select from PSYC1002: Psychology 1002
Engineering Core	3	Select from MATH1005: Statistical Thinking with Data
Aeronautical Stream Core	6	Select from ENGG1802: Engineering Mechanics
Aeronautical Stream Core	6	Select from AMME1362: Introduction to Engineering Materials

Note: MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.

Students who fail PSYC1002 in 2016, can either take up PSYC1001 in S1 of 2017 or PMGT1852 in S2 2017.

Year 2 - Semester 1

Type	CP	CP From
Aeronautical Stream Core	6	Select from AMME2500: Engineering Dynamics
Aeronautical Stream Core	6	Select from AMME2261: Fluid Mechanics 1
Project Management Core	6	Select from ENGG2850: Project Cost and Finance
Project Management Core	6	Select from BUSS1040: Economics for Business Decision Making

Year 2 - Semester 2

Type	CP	CP From
Aeronautical Stream Core	6	Select from AMME2301: Mechanics of Solids 1
Aeronautical Stream Core	6	Select from AMME2262: Introduction to Thermal Engineering
Engineering Core	6	Select from ENGG1111: Integrated Engineering 1
Project Management Core	6	Select from ENGG2852: Project Based Organisational Behaviour [not offered in 2020] Note: This unit is discontinued from 2019. Replacement unit is PMGT2854.

Note: ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students.

Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.

Year 3 - Semester 1

Type	CP	CP From
Aeronautical Stream Core	6	Select from AMME3500: System Dynamics and Control
Aeronautical Stream Core	6	Select from AERO3360: Aerospace Structures 1
Aeronautical Stream Core	6	Select from AMME2700: Instrumentation
Project Management Core	6	Select from ENGG2851: Project Analytics

Year 3 - Semester 2

Type	CP	CP From
Engineering Core	2	Select from ENGG2111: Integrated Engineering 2
Aeronautical Stream Core	6	Select from AERO3260: Aerodynamics 1
Aeronautical Stream Core	6	Select from MECH2400: Mechanical Systems Design 1
Aeronautical Stream Core	6	Select from AERO2703: Aircraft Performance and Operations
Project Management Core	6	Select from ENGG2855: Project Acceptance

Note: ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv or AERO2711 Advanced Aerospace Project 1, with school approval.

Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.

Year 4 - Semester 1

Type	CP	CP From
Engineering Core	2	Select from ENGG3111: Integrated Engineering 3
Aeronautical Stream Core	6	Select from AERO3460: Aerospace Design 1
Aeronautical Stream Core	6	Select from AERO3261: Propulsion
Project Management Core	6	Select from PMGT3858: Adapting to Project Context
Project Management Core	6	Select from ENGG3853: Project Risk Management: Tools & Techniques

Note: ENGG3111 may be replaced by ENGG3062 Technology Education (Adv) or AERO3711 Advanced Aerospace Project 2, with school approval.

Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.

Year 4 - Semester 2

Type	CP	CP From
Aeronautical Stream Core	6	Select from AERO3560: Flight Mechanics 1
Project Management Electives	6	Select from Unit Block: Project Management Electives
Project Management Core	6	Select from PMGT3855: Project Variance Analysis
Project Management Core	6	Select from ENGG3854: Legal Aspects of Projects

Year 5 - Semester 1

Type	CP	CP From
Engineering Core	0	Select from ENGG4000: Practical Experience
Engineering Core	2	Select from ENGG4111: Integrated Engineering 4
Engineering Core	6	Select from AMME4111: Thesis A
Aeronautical Stream Core	6	Select from AERO4460: Aerospace Design 3
Aeronautical Specialist Electives	6	Select from Unit Block: Aeronautical Specialist Electives
Project Management Electives	6	Select from Unit Block: Project Management Electives

Note: ENGG4111 may be replaced by ENGG4064 Advanced Engineering Design A or AERO4711 Advanced Aerospace Project 3, with school approval.

Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.

Year 5 - Semester 2

Type	CP	CP From
Engineering Core	6	Select from AMME4112: Thesis B
Project Management Electives	6	Select from Unit Block: Project Management Electives
Aeronautical Specialist Electives	6	Select from Unit Block: Aeronautical Specialist Electives

4. Pathways

48cp Majors

Type

CP

CP From

Note: From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.

You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors

Major in Space Engineering (24cp)

Type	CP	CP From
Core	6	AERO2705: Space Engineering 1 Note: Replacing ENGG1111
Core	6	AERO3760: Space Engineering 2 Note: Replacing AERO2703
Core	6	AERO4701: Space Engineering 3 Note: Replacing AERO4460
Space Specialist Electives	6	Select from Unit Block Space Specialist Electives

Note: Students are required to complete 24cp of units as listed, to be eligible of this major. There are minimum ATAR (>99) or WAM (>75%) entry requirements for enrolment in this major.

5. Unit Blocks

Block 1 - Project Management Electives (Min CP: 18,Max CP: 18)

Unit Code	Unit Name	CP	Sessions Offered
PMGT2854	Executing Projects	6	Semester 2
PMGT3856	Sustainability and Knowledge Management	6	Semester 1
PMGT3857	International Project Management	6	Semester 2

Block 2 - Aeronautical Specialist Electives (Min CP: 12,Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
AERO4260	Aerodynamics 2	6	Semester 1
AERO4360	Aerospace Structures 2	6	Semester 1
AERO4560	Flight Mechanics 2	6	Semester 2

Note: Students are required to complete 12 cp of units of study from this table of Aeronautical Specialist Electives

Block 3 - Space Specialist Electives (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
AERO4260	Aerodynamics 2	6	Semester 1
AERO4360	Aerospace Structures 2	6	Semester 1
AERO4560	Flight Mechanics 2	6	Semester 2
AERO5700	Space Engineering (Advanced)	6	Semester 1 Semester 2

Block 4 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code	Unit Name	CP	Sessions Offered
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
ENGG1111	Integrated Engineering 1	6	Semester 1
ENGG2111	Integrated Engineering 2	2	Semester 1 Semester 2 Int February
ENGG3111	Integrated Engineering 3	2	Semester 1 Semester 2
ENGG4000	Practical Experience	0	Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December
ENGG4111	Integrated Engineering 4	2	Semester 1
MATH1001	Differential Calculus	3	Semester 1 Summer Main
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1003	Integral Calculus and Modelling	3	Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January

Block 5 - Aeronautical Stream Core (Min CP: 108,Max CP: 108)

Unit Code	Unit Name	CP	Sessions Offered
AERO1560	Introduction to Aerospace Engineering	6	Semester 1
AERO2703	Aircraft Performance and Operations	6	Semester 2
AERO3260	Aerodynamics 1	6	Semester 2
AERO3261	Propulsion	6	Semester 1
AERO3360	Aerospace Structures 1	6	Semester 1
AERO3460	Aerospace Design 1	6	Semester 1
AERO3560	Flight Mechanics 1	6	Semester 2
AERO4460	Aerospace Design 3	6	Semester 1
AMME1362	Introduction to Engineering Materials	6	Semester 2
AMME2261	Fluid Mechanics 1	6	Semester 1
AMME2262	Introduction to Thermal Engineering	6	Semester 2
AMME2301	Mechanics of Solids 1	6	Semester 2
AMME2500	Engineering Dynamics	6	Semester 1
AMME2700	Instrumentation	6	Semester 1
AMME3500	System Dynamics and Control	6	Semester 1
ENGG1801	Engineering Computing	6	Semester 1 Int January
ENGG1802	Engineering Mechanics	6	Semester 2 Summer Main Int January
MECH2400	Mechanical Systems Design 1	6	Semester 1

Block 6 - Project Management Core (Min CP: 66,Max CP: 66)

Unit Code	Unit Name	CP	Sessions Offered
BUSS1040	Economics for Business Decision Making	6	Semester 1 Semester 2
ENGG1850	Introduction to Project Management	6	Semester 1
ENGG2850	Project Cost and Finance	6	Semester 1
ENGG2851	Project Analytics	6	Semester 1
ENGG2852	Project Based Organisational Behaviour [not offered in 2020]	6	Semester 2
ENGG2855	Project Acceptance	6	Semester 1
ENGG3853	Project Risk Management: Tools & Techniques	6	Semester 1
ENGG3854	Legal Aspects of Projects	6	Semester 1 Semester 2
PMGT3855	Project Variance Analysis	6	Semester 2
PMGT3858	Adapting to Project Context	6	Semester 1
PSYC1002	Psychology 1002	6	Semester 2 Summer Main

Faculty of Engineering

Aeronautical / Project Management (2016)