1. Overview

Course:	Biomedical / Project Management (2016)
CP Required:	240
Min FT Duration:	5.00 Years
Min PT Duration:	N/A
Faculty/School:	Faculty of Engineering
Years Offered:	2018, 2017, 2016, 2015

2. Requirements

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (156 credit points):

► 36 credit points of Engineering core units

► 84 credit points of Biomedical stream core units

► 18 credit points of Biomedical Specialist elective units

► 6 credit points of Engineering Systems units

► 6 credit points of Bioelectronics and Biomedical Control elective units

Project Management:

► 66 credit points of Project Management core units

► 18 credit points of Project Management elective units

plus 6 credit points of General Electives

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering

For the Bachelor of Engineering component of a combined degree:

(a) The units of study that may be taken for the Bachelor of Engineering component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering single degree;

(b) Except where approved, all candidates must complete a minimum of 144 credit points comprising:

(i) 36cp from the Engineering Core Table, including all required units;

(ii) 108cp from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Candidates who do not meet the requirements for the award of the Bachelor of Engineering Honours but who have otherwise satisfied the requirements of the Bachelor of Engineering shall graduate with the Bachelor of Engineering pass degree.

Requirements for the Bachelor of Project Management

For the Bachelor of Project Management component of a combined degree:

(a) Candidates must complete the core units of study as set out in the Bachelor of Project Management Unit of Study Table.

(b) 18cp from the Project Management Electives Table must be completed.

Engineering Honours Requirements

(a) an EWAM of at least 65 immediately prior to the semester in which a thesis unit of study is first attempted; and

(b) have an EIHWAM of at least 65 at the completion of the degree; and

(c) complete the requirements within a time limit of 5 years for a single Bachelor of Engineering Honours degree or complete the requirements within a time limit of 6 years for a combined Bachelor of Engineering Honours combined degree.

Candidates who satisfy the requirements for the Engineering degree, but who have not satisfied each of Clauses (a), (b) and (c), will qualify for the award of the Bachelor of Engineering degree (i.e. the PASS degree, awarded without Honours).

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type	CP	CP From
Engineering Core	3	Select from MATH1001: Differential Calculus Note: This unit is discontinued from 2018. Replacement unit is MATH1021.
Engineering Core	3	Select from MATH1002: Linear Algebra
Biomedical Stream Core	6	Select from AMME1960: Biomedical Engineering 1A
Project Management Core	6	Select from ENGG1850: Introduction to Project Management
Biomedical Stream Core	6	Select from ENGG1801: Engineering Computing

Note: MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.

Year 1 - Semester 2

Type	CP	CP From
Engineering Core	3	Select from MATH1003: Integral Calculus and Modelling Note: This unit is discontinued from 2018. Replacement unit is MATH1023.
Biomedical Stream Core	6	Select from CHEM1101: Chemistry 1A Note: This unit is discontinued from 2018. Replacement unit is CHEM1111.
Project Management Core	6	Select from PSYC1002: Psychology 1002
Biomedical Stream Core	6	Select from AMME1961: Biomedical Engineering 1B
Engineering Core	3	Select from MATH1005: Statistical Thinking with Data

Note: MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.

Students who fail PSYC1002 in 2016, can either take up PSYC1001 in S1 of 2017 or PMGT1852 in S2 2017.

Year 2 - Semester 1

Type	CP	CP From
Biomedical Stream Core	6	Select from AMME2960: Biomedical Engineering 2
Project Management Core	6	Select from ENGG2851: Project Analytics
Project Management Core	6	Select from ENGG2850: Project Cost and Finance
Biomedical Stream Core	6	Select from ELEC1103: Fundamentals of Electrical and Electronic Engineering

Year 2 - Semester 2

Type	CP	CP From
Biomedical Stream Core	6	Select from MECH2901: Anatomy and Physiology for Engineers
Engineering Systems Units	6	Select from MECH2400: Mechanical Systems Design 1
Engineering Core	6	Select from ENGG1111: Integrated Engineering 1
Biomedical Stream Core	6	Select from AMME1362: Introduction to Engineering Materials

Note: ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students.

Year 3 - Semester 1

Type	CP	CP From
Biomedical Stream Core	6	Select from AMME3660: Biomanufacturing
Project Management Core	6	Select from BUSS1040: Economics for Business Decision Making
Bioelectronics & Biomedical Control Units	6	Select from Unit Block: Bioelectronics & Biomedical Control Units
Project Management Electives	6	Select from Unit Block: Project Management Electives

Year 3 - Semester 2

Type	CP	CP From
Engineering Core	2	Select from ENGG2111: Integrated Engineering 2
Biomedical Stream Core	6	Select from MECH3921: Biomedical Design and Technology
Project Management Core	6	Select from ENGG2855: Project Acceptance
Biomedical Stream Core	6	Select from ELEC2104: Electronic Devices and Circuits
Project Management Core	6	Select from ENGG2852: Project Based Organisational Behaviour [not offered in 2020] Note: This unit is discontinued from 2019. Replacement unit is PMGT2854.

Note: ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv, with Faculty approval.

Year 4 - Semester 1

Type	CP	CP From
Engineering Core	2	Select from ENGG3111: Integrated Engineering 3
Project Management Core	6	Select from PMGT3858: Adapting to Project Context
Project Management Core	6	Select from ENGG3853: Project Risk Management: Tools & Techniques
Biomedical Specialist Electives	12	Select from Unit Block: Biomedical Specialist Electives

Note: ENGG3111 may be replaced by ENGG3062 Technology Education (Adv), with Faculty approval.

Year 4 - Semester 2

Type	CP	CP From
Project Management Core	6	Select from PMGT3855: Project Variance Analysis
Project Management Core	6	Select from ENGG3854: Legal Aspects of Projects
Project Management Electives	6	Select from Unit Block: Project Management Electives
Biomedical Specialist Electives	6	Select from Unit Block: Biomedical Specialist Electives

Year 5 - Semester 1

Type	CP	CP From
Engineering Core	2	Select from ENGG4111: Integrated Engineering 4
Engineering Core	0	Select from ENGG4000: Practical Experience
Biomedical Stream Core	6	Select from AMME4971: Tissue Engineering
Engineering Core	6	Select from AMME4111: Thesis A Note: Biomedical stream students should be taking replacement unit BMET4111
Project Management Electives	6	Select from Unit Block: Project Management Electives
Elective	6	Electives. Note: General Electives

Note: ENGG4111 may be replaced by ENGG4064/5 Advanced Engineering Design A/B, with Faculty approval.

Year 5 - Semester 2

Type	CP	CP From
Biomedical Stream Core	6	Select from MECH4961: Biomechanics and Biomaterials
Project Management Electives	6	Select from Unit Block: Project Management Electives
Engineering Core	6	Select from AMME4112: Thesis B Note: Biomedical stream students should be taking replacement unit BMET4112

4. Pathways

No streams/majors defined for this course version.

5. Unit Blocks

Block 1 - Project Management Electives (Min CP: 24,Max CP: 24)

Unit Code	Unit Name	CP	Sessions Offered
PMGT2854	Executing Projects	6	Semester 2
PMGT3856	Sustainability and Knowledge Management	6	Semester 1
PMGT3857	International Project Management	6	Semester 2
ELECTIVE	Free Electives	6

Block 2 - Engineering Systems Units (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
AMME2200	Introductory Thermofluids	6	Semester 2
CHNG2803	Heat and Mass Transfer	6	Semester 1
ELEC2302	Signals and Systems	6	Semester 2
MECH2400	Mechanical Systems Design 1	6	Semester 1

Block 3 - Bioelectronics & Biomedical Control Units (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
AMME4790	Introduction to Biomechatronics	6	Semester 2
BMET5995	Advanced Bionics	6	Semester 1
ELEC3802	Fundamentals of Biomedical Engineering	6	Semester 1

Note: AMME4790 has been replaced by AMME5790 from 2017

Block 5 - Biomedical Specialist Electives (Min CP: 18,Max CP: 18)

Unit Code	Unit Name	CP	Sessions Offered
AMME4710	Computer Vision and Image Processing	6	Semester 2
AMME4990	Biomedical Product Development	6	Semester 1
AMME4992	Regulatory Affairs in the Medical Industry	6	Semester 2
AMME5931	Nanomaterials in Medicine	6	Semester 1
AMME5951	Fundamentals of Neuromodulation	6	Semester 1
AMME5958	Nanotechnology in Biomedical Engineering	6	Semester 2
AMME5962	Introduction to Mechanobiology	6	Semester 2
AMME5995	Advanced Bionics	6	Semester 1
CHNG5601	Membrane Science	6	Semester 1
CHNG5602	Cellular Biophysics	6	Semester 2
CHNG5603	Advanced Industrial Modelling and Analysis	6	Semester 1
CHNG5604	Advanced Membrane Engineering	6	Semester 2
CHNG5605	Bio-Products: Laboratory to Marketplace	6	Semester 2
COMP5048	Visual Analytics	6	Semester 1 Semester 2
ELEC3305	Digital Signal Processing	6	Semester 1
ELEC3404	Electronic Circuit Design	6	Semester 1
ELEC3803	Bioelectronics [not offered in 2021]	6	Semester 2
ELEC5514	Networked Embedded Systems	6	Semester 2
ELEC5614	Real Time Computing	6	Semester 1
ELEC5701	Technology Venture Creation [not offered in 2021]	6	Semester 2
HTIN5002	Quality Frameworks for Health Innovation	6	Semester 2 Block Mode
MECH4902	Orthopaedic and Surgical Engineering	6	Semester 2
MECH5310	Advanced Engineering Materials	6	Semester 1
MECH5720	Sensors and Signals	6	Semester 2
MECH5907	Orthopaedic and Surgical Engineering	6	Semester 2
MTRX5700	Experimental Robotics	6	Semester 1

Note: MECH4902 has been replaced by MECH5907 from 2017. At least 18 credit points (three units of study) must be selected from the units listed above including at least one of the following: AMME4990, AMME4992, CHNG5605 or ELEC5701.

Block 6 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code	Unit Name	CP	Sessions Offered
AMME4010	Major Industrial Project	24	Semester 1 Semester 2
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
BMET4010	Major Industrial Project	24	Semester 1 Semester 2
BMET4111	Thesis A	6	Semester 1 Semester 2
BMET4112	Thesis B	6	Semester 1 Semester 2
CHNG4203	Major Industrial Project	24	Semester 1 Semester 2
CHNG4811	Thesis A	6	Semester 1 Semester 2
CHNG4812	Thesis B	6	Semester 1 Semester 2
CIVL4022	Thesis A	6	Semester 1 Semester 2
CIVL4023	Thesis B	6	Semester 1 Semester 2
ELEC4712	Thesis A	6	Semester 1 Semester 2
ELEC4713	Thesis B	6	Semester 1 Semester 2
ELEC4714	Major Industrial Project	24	Semester 1 Semester 2
ENGG1111	Integrated Engineering 1	6	Semester 1
ENGG2111	Integrated Engineering 2	2	Semester 1 Semester 2 Int February
ENGG3111	Integrated Engineering 3	2	Semester 1 Semester 2
ENGG4000	Practical Experience	0	Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December
ENGG4111	Integrated Engineering 4	2	Semester 1
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1021	Calculus of One Variable	3	Semester 1 Semester 2
MATH1023	Multivariable Calculus and Modelling	3	Semester 1 Semester 2
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1905	Statistics (Advanced)	3	Semester 2
MATH1921	Calculus of One Variable (Adv)	3	Semester 1
MATH1923	Multivariable Calculus and Modelling (Adv)	3	Semester 2

Note: Complete a minimum of 36cp including:

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR BMET4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR BMET4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream or major.

Block 7 - Biomedical Stream Core (Min CP: 78,Max CP: 78)

Unit Code	Unit Name	CP	Sessions Offered
AMME1362	Introduction to Engineering Materials	6	Semester 2
AMME1960	Biomedical Engineering 1A	6	Semester 1
AMME1961	Biomedical Engineering 1B	6	Semester 2
AMME2960	Biomedical Engineering 2	6	Semester 1
AMME3660	Biomanufacturing	6	Semester 1
AMME4971	Tissue Engineering	6	Semester 1
CHEM1101	Chemistry 1A	6	Semester 1 Semester 2 Summer Main
ELEC1103	Fundamentals of Electrical and Electronic Engineering	6	Semester 1
ELEC2104	Electronic Devices and Circuits	6	Semester 2
ENGG1801	Engineering Computing	6	Semester 1 Int January
ENGG1802	Engineering Mechanics	6	Semester 2 Summer Main Int January
MECH2901	Anatomy and Physiology for Engineers	6	Semester 2
MECH3921	Biomedical Design and Technology	6	Semester 2
MECH4961	Biomechanics and Biomaterials	6	Semester 2

Block 8 - Project Management Core (Min CP: 66,Max CP: 66)

Unit Code	Unit Name	CP	Sessions Offered
BUSS1040	Economics for Business Decision Making	6	Semester 1 Semester 2
ENGG1850	Introduction to Project Management	6	Semester 1
ENGG2850	Project Cost and Finance	6	Semester 1
ENGG2851	Project Analytics	6	Semester 1
ENGG2852	Project Based Organisational Behaviour [not offered in 2020]	6	Semester 2
ENGG2855	Project Acceptance	6	Semester 1
ENGG3853	Project Risk Management: Tools & Techniques	6	Semester 1
ENGG3854	Legal Aspects of Projects	6	Semester 1 Semester 2
PMGT3855	Project Variance Analysis	6	Semester 2
PMGT3858	Adapting to Project Context	6	Semester 1
PSYC1002	Psychology 1002	6	Semester 2 Summer Main

Faculty of Engineering

Biomedical / Project Management (2016)