Note: This course version is currently under review and is subject to change.
ProgramsU_ArchvBE2014 CombBE/BPM 2014Mechatronic Engineering / Project Management (2013)
Show information forcommencing students (ie. started First Year then).
The course requirements described here apply to persons who commenced their candidature after 1 January, 2013 and persons who commenced their candidature prior to 1 January, 2013 who elect to proceed under 2013 resolutions.
Candidates who commenced prior to 1 January, 2013 may complete the requirements in accordance with the resolutions in force at the time of their commencement, provided that requirements are completed by 1 January, 2018, or later date as the faculty may, in special circumstances, approve.
Candidates who first commenced in 2013, and are re-enrolling for 2014 or later, should be aware that there may have been changes in units of study offered since, Check that units are still available by clicking the unit of study link in the course table. See 2014 version of this course for up to date unit of study list.
For details of relevant resolutions see faculty handbook at sydney.edu.au/handbooks.
Print View | Download as PDF Administrative Information (Fees, ATAR etc.)
Year 1 - Semester 1
Type | CP | CP From |
Core | 6 | ENGG1801: Engineering Computing |
Core | 6 | ENGG1850: Introduction to Project Management |
Core | 3 | MATH1001: Differential Calculus Note: This unit is discontinued from 2018. Replacement unit is MATH1021. |
Core | 3 | MATH1002: Linear Algebra |
Core | 6 | MTRX1701: Introduction to Mechatronic Engineering |
Year 1 - Semester 2
Type | CP | CP From |
Core | 6 | AMME1550: Dynamics 1 |
Core | 6 | ENGG1802: Engineering Mechanics |
Core | 3 | MATH1003: Integral Calculus and Modelling Note: This unit is discontinued from 2018. Replacement unit is MATH1023. |
Core | 3 | MATH1005: Statistical Thinking with Data |
Core | 6 | PSYC1002: Psychology 1002 |
Year 2 - Semester 1
Type | CP | CP From |
Core | 6 | ELEC1103: Fundamentals of Electrical and Electronic Engineering |
Core | 6 | AMME2302: Materials 1 |
Core | 6 | AMME2500: Engineering Dynamics |
Core | 6 | MATH2067: DEs and Vector Calculus for Engineers |
Year 2 - Semester 2
Year 3 - Semester 1
Type | CP | CP From |
Core | 6 | ENGG2850: Project Cost and Finance |
Core | 6 | ENGG2851: Project Analytics |
Core | 6 | MTRX2700: Mechatronics 2 |
Core | 6 | ELEC3404: Electronic Circuit Design |
Year 3 - Semester 2
Type | CP | CP From |
Core | 6 | AMME2200: Introductory Thermofluids |
Core | 6 | AMME2301: Mechanics of Solids |
Core | 6 | ENGG2855: Project Acceptance |
Core | 6 | MECH2400: Mechanical Systems Design 1 |
Year 4 - Semester 1
Type | CP | CP From |
Core | 6 | AMME3500: System Dynamics and Control |
Core | 6 | ENGG3853: Project Risk Management: Tools & Techniques |
Core | 6 | MECH3660: Manufacturing Engineering |
Core | 6 | PMGT3858: Adapting to Project Context |
Year 4 - Semester 2
Type | CP | CP From |
Core | 6 | ENGG3854: Legal Aspects of Projects |
Core | 6 | MECH3460: Mechanical Systems Design 2 |
Core | 6 | MTRX3700: Mechatronics 3 |
Core | 6 | PMGT3855: Project Variance Analysis |
Year 5 - Semester 1
Type | CP | CP From |
Core | 6 | AMME4121: Engineering Project A Note: Students with ISWAM of 65% or greater are eligible for Honours pathway and can replace 4th Year Engineering Project units AMME4121 and AMME4122 with Honours Thesis Units AMME4111 and AMME4112. |
Core | 0 | ENGG4000: Practical Experience |
Core | 6 | MECH4601: Professional Engineering 2 |
List | 12 | Select from Mechatronic Recommended Units PM Electives Note: At least 6 credit points of Mechatronics elective units must be completed. These may be taken in either first or second semester. At least 12 credit points of Project Management elective units must be completed. These may be taken in either first or second semester. |
Year 5 - Semester 2
Type | CP | CP From |
Core | 6 | AMME4122: Engineering Project B Note: Students with ISWAM of 65% or greater are eligible for Honours pathway and can replace 4th Year Engineering Project units AMME4121 and AMME4122 with Honours Thesis Units AMME4111 and AMME4112. |
List | 18 | Select from Mechatronic Recommended Units PM Electives Note: At least 6 credit points of Mechatronics elective units must be completed. These may be taken in either first or second semester. At least 12 credit points of Project Management elective units must be completed. These may be taken in either first or second semester. |
Requirements for this Pathway
Type | CP | CP From |
Core | 6 | AMME4111: Thesis A |
Core | 6 | AMME4112: Thesis B |
Note: Students with ISWAM of 65% or greater are eligible for Honours pathway and can replace 4th Year Engineering Project units AMME4121 and AMME4122 with Honours Thesis Units AMME4111 and AMME4112.
BE HONOURS THESIS
Type | CP | CP From |
Core
|
6 |
AMME4111: Thesis A |
Core
|
6 |
AMME4112: Thesis B |
View complete Program Structure |
Note: Note: Students with ISWAM of 65% or greater are eligible for Honours pathway and can replace 4th Year Engineering Project units AMME4121 and AMME4122 with Honours Thesis Units AMME4111 and AMME4112.
Block 1 - Mechatronic Recommended Units (Min CP: 18,Max CP: 18)
Unit Code | Unit Name | CP | Sessions Offered |
AMME4500 | Guidance, Navigation and Control | 6 | |
AMME4710 | Computer Vision and Image Processing | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
AMME4790 | Introduction to Biomechatronics | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
MECH4720 | Sensors and Signals | 6 | |
MECH4730 | Computers in Real-Time Control and Instrumentation | 6 | |
MTRX5700 | Experimental Robotics | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
Note: AMME4790 has been replaced by AMME5790 in 2017.
Block 2 - PM Electives (Min CP: 12,Max CP: 12)
Unit Code | Unit Name | CP | Sessions Offered |
PMGT2854 | Executing Projects | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
PMGT3856 | Sustainability and Knowledge Management | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
PMGT3857 | International Project Management | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
Course: | Mechatronic Engineering / Project Management (2013) |
CP Required: | 240 |
Min FT Duration: | 5.00 Years |
Min PT Duration: | N/A |
Faculty/School: | University Archive |
Years Offered: | 2014, 2013, 2012 |
Requirements: | The units of study that may be taken for the Bachelor of Engineering are set out in the tables of units of study for the specialised streams from the Faculty of Engineering and Information Technologies. b. The units of study that may be taken for the Bachelor of Arts are set out in Table A from the Faculty of Arts Tables of units of study. c. To qualify for the award of the combined degree, a candidate must complete 240 credit points, comprising of i. For the Bachelor of Engineering, a candidate must complete all core units of study prescribed in the table of units for the Bachelor of Engineering stream the candidate is pursuing. ii. For the Bachelor of Project Management, 84 Credit Points of core units of study as set out in the Bachelor of Project Management unit of study table; iii. Any additional elective units of study that are applicable to either the appropriate stream of the Bachelor of Engineering or the Bachelor of Project Management; and/or a maximum of 12 credit points of free electives; as may be necessary to gain credit to complete the requirements of the degree. |