Note: This unit version is currently being edited and is subject to change!

AERO9261: Propulsion (2019 - Semester 1)

Download UoS Outline

Unit: AERO9261: Propulsion (6 CP)
Mode: Normal-Day
On Offer: Yes
Level: Postgraduate
Faculty/School: School of Aerospace, Mechanical & Mechatronic Engineering
Unit Coordinator/s: Dr Verstraete, Dries
Session options: Semester 1
Versions for this Unit:
Site(s) for this Unit:
Campus: Camperdown/Darlington
Pre-Requisites: AMME2200 OR (AMME2261 AND AMME2262).
Brief Handbook Description: This unit of study teaches the students the techniques used to propel aircraft. The students will learn to analyse various propulsion systems in use– propellers, gas turbines, etc.

The topics covered include: Propulsion unit requirements for subsonic and supersonic flight; thrust components, efficiencies, additive drag of intakes; piston engine components and operation; propeller theory; operation, components and cycle analysis of gas turbine engines; turbojets; turbofans; turboprops; ramjets. Components: compressor, fan, burner, turbine, nozzle. Efficiency of components: Off-design considerations. Future directions: minimisation of noise and pollution; scram-jets; hybrid engines.
Assumed Knowledge: Good knowledge of fluid dynamics and thermodynamics
Lecturer/s: Dr Verstraete, Dries
Timetable: AERO9261 Timetable
Time Commitment:
# Activity Name Hours per Week Sessions per Week Weeks per Semester
1 Lecture 1.00 1 13
2 Lecture 2.00 1 13
3 Tutorial 2.00 1 13
4 Independent Study 6.00 13

Attributes listed here represent the key course goals (see Course Map tab) designated for this unit. The list below describes how these attributes are developed through practice in the unit. See Learning Outcomes and Assessment tabs for details of how these attributes are assessed.

Attribute Development Method Attribute Developed
Solving non-linear systems of equations to determine propeller performance; Performance calculations for gas turbine engines using iterative methods (1) Maths/ Science Methods and Tools (Level 3)
Understanding the fundamentals and operation of propulsion systems in aircraft. (2) Engineering/ IT Specialisation (Level 4)
Selecting appropriate engine cycles and propellers for a given aircraft and flight conditions (3) Problem Solving and Inventiveness (Level 2)
Students will gain skills in problem solving for aircraft propulsion systems ranging from propellers to the various types of gas-turbine engines. (4) Design (Level 2)
develop interdisciplinary engine solutions (5) Interdisciplinary, Inclusiveness, Influence (Level 2)
Finding, studying and comprehending reference material. Applying reference material to current problems.
Written communication, in particular in the area of project specification and reporting skills.
(6) Communication and Inquiry/ Research (Level 2)

For explanation of attributes and levels see Engineering & IT Graduate Outcomes Table 2018.

Learning outcomes are the key abilities and knowledge that will be assessed in this unit. They are listed according to the course goal supported by each. See Assessment Tab for details how each outcome is assessed.

(6) Communication and Inquiry/ Research (Level 2)
1. Write an engineering report on an experimental test
2. Discuss and present engine performance and design data in a written report
3. Explain engine performance and different engine types in an oral exam
(4) Design (Level 2)
4. Design and select a gas turbine engine type for a given application
(3) Problem Solving and Inventiveness (Level 2)
5. Selecting appropriate engine cycles and propellers for a given aircraft and flight conditions
(2) Engineering/ IT Specialisation (Level 4)
6. Carry out a cycle analysis of a gas turbine engine, including ramjet & turbo-fan engines.
7. Understand the working of various components of gas turbines and how their interaction results in the overall engine performance
8. Identify relevant data to estimate performance of existing aircraft engines
(1) Maths/ Science Methods and Tools (Level 3)
9. Solve systems of non-linear equations governing propeller performance
10. Solve thermodynamic cycle calculations for both design point and off-design calculations
Assessment Methods:
# Name Group Weight Due Week Outcomes
1 Propeller Assignment* No 15.00 Week 5 1, 2, 5, 9,
2 Gas Turbine Assignment 1* Yes 10.00 Week 8 2, 4, 5, 6, 7, 8, 10,
3 Quiz 1* No 5.00 Week 9 6, 10,
4 Gas Turbine Assignment 2* Yes 10.00 Week 12 2, 4, 5, 6, 7, 10,
5 Quiz 2* No 5.00 Week 13 6, 10,
6 Gas Turbine Lab Report* No 5.00 Multiple Weeks 1,
7 Final Exam Part A: Exercises No 15.00 Exam Period 6, 10,
8 Final Exam Part B: Theory No 30.00 Exam Period 3, 7,
9 Tutorial Exercises No 5.00 Multiple Weeks 8, 9, 10,
Assessment Description: * indicates an assessment task which must be repeated if a student misses it due to special consideration

Propeller Assignment: This assignment on Propellers will be in a Report form and includes the results of the lab and the propeller performance calculations.

Gas Turbine Assignment 1 : Gas turbine engine cycle calculation: selection and design.

Gas Turbine Assignment 2 : Gas turbine off-design performance

Quiz 1 and 2: Exercise to be solved independently during the tutorial and handed in (Open Book)

Tutorial Exercises: Solution of one tutorial question per tutorial as specified by the unit coordinator at the end of the tutorial

Gas Turbine Lab Report: Report on the lab on the micro turbine including performance calculations and operating line. Due 1 week after the actual lab. Lab runs in multiple weeks. Students will be assigned a specific session.

Final Exam: The exam consists of 2 parts:

Part A Exercises: The student takes a two hours examination at the end of the course. This is worth 15% of the total marks. This part of the exam is open book and written.

Part B Theory: The student has an oral exam on the theory of the UoS. Each student will prepare and answer 2 questions and discuss/explain the answer to the UoS Coordinator.

You must get 50% in the final exam to pass the unit, regardless of the sum of your individual marks.

There may be statistically defensible moderation when combining the marks from each component to ensure consistency of marking between markers, and alignment of final grades with unit outcomes.

The penalty for lateness is 5% per day.
Grade Type Description
Standards Based Assessment Final grades in this unit are awarded at levels of HD for High Distinction, DI (previously D) for Distinction, CR for Credit, PS (previously P) for Pass and FA (previously F) for Fail as defined by University of Sydney Assessment Policy. Details of the Assessment Policy are available on the Policies website at . Standards for grades in individual assessment tasks and the summative method for obtaining a final mark in the unit will be set out in a marking guide supplied by the unit coordinator.
Policies & Procedures: See the policies page of the faculty website at for information regarding university policies and local provisions and procedures within the Faculty of Engineering and Information Technologies.
Recommended Reference/s: Note: References are provided for guidance purposes only. Students are advised to consult these books in the university library. Purchase is not required.
Online Course Content:
Note on Resources: Dedicated Course Notes will be provided to the students on the Canvas website of the UoS

Note that the "Weeks" referred to in this Schedule are those of the official university semester calendar

Week Description
Week 1 Course Overview; Review of Thermodynamics & Fluid Mechanics; Engine Thrust and Performance Parameters
Week 2 Propeller Principles; Froude Theory; Blade Element Theory
Week 3 Gas Turbines; Turbojet Engines
Week 4 Turbofan Engines; Afterburners; Turboprop Engines
Week 5 Turbomachinery Fundamentals & maps
Assessment Due: Propeller Assignment*
Week 6 Gas Turbine Component Matching
Week 7 Gas Turbine Off-Design Performance
Week 8 Gas Turbine Engine Control
Assessment Due: Gas Turbine Assignment 1*
Week 9 Air Intakes
Assessment Due: Quiz 1*
Week 10 Compressors; Combustion Chambers
Week 11 Combustion Chambers; Turbines
Week 12 Turbines; Novel and Advanced Engine Cycles (Geared Turbofan; Intercooled Cycles; Ramjet / Scramjet Engines; ...)
Assessment Due: Gas Turbine Assignment 2*
Week 13 Revision
Assessment Due: Quiz 2*
Exam Period Assessment Due: Final Exam Part A: Exercises
Assessment Due: Final Exam Part B: Theory

Course Relations

The following is a list of courses which have added this Unit to their structure.

Course Year(s) Offered
Master of Professional Engineering (Aerospace) 2015, 2016, 2017, 2018, 2019, 2020

Course Goals

This unit contributes to the achievement of the following course goals:

Attribute Practiced Assessed
(5) Interdisciplinary, Inclusiveness, Influence (Level 2) Yes 0%
(6) Communication and Inquiry/ Research (Level 2) Yes 25.5%
(4) Design (Level 2) Yes 4%
(3) Problem Solving and Inventiveness (Level 2) Yes 9.5%
(2) Engineering/ IT Specialisation (Level 4) Yes 38%
(1) Maths/ Science Methods and Tools (Level 3) Yes 23%

These goals are selected from Engineering & IT Graduate Outcomes Table 2018 which defines overall goals for courses where this unit is primarily offered. See Engineering & IT Graduate Outcomes Table 2018 for details of the attributes and levels to be developed in the course as a whole. Percentage figures alongside each course goal provide a rough indication of their relative weighting in assessment for this unit. Note that not all goals are necessarily part of assessment. Some may be more about practice activity. See Learning outcomes for details of what is assessed in relation to each goal and Assessment for details of how the outcome is assessed. See Attributes for details of practice provided for each goal.