Note: This course version is currently under review and is subject to change.

ProgramsEngBE Hons 2015+BE Hons CombinedBE Hons/BScBE/BScMechanical / Science (2021)


Show information forcommencing students (ie. started First Year then).
 
Faculty of Engineeringengineering.undergraduate@sydney.edu.au


Print View | Download as PDF Administrative Information (Fees, ATAR etc.)

Select plan for Major/Pathway

Year 1 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
3MATH1021: Calculus of One Variable
6Science Units
3MATH1002: Linear Algebra
6MECH1560: Introduction to Mechanical Engineering
6ENGG1810: Introduction to Engineering Computing
0ENGP1001: Professional Engagement Program 1A


Note:  All students must enrol in ENGP1001 in their first semester of enrolment.

Note:   MATH1021 and MATH1002 may be replaced by advanced units MATH1921 and MATH1902.


Year 1 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
3MATH1023: Multivariable Calculus and Modelling
6Science Units
6AMME1362: Materials 1
3MATH1005: Statistical Thinking with Data
6AMME1802: Engineering Mechanics
0ENGP1002: Professional Engagement Program 1B

Note:   MATH1023 and MATH1005 may be replaced by advanced units MATH1923 and MATH1905.


Year 2 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6Science Units
6AMME2000: Engineering Analysis
6AMME2261: Fluid Mechanics 1
6AMME2500: Engineering Dynamics
0ENGP1003: Professional Engagement Program 1C

Year 2 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6Science Units
6AMME2301: Mechanics of Solids 1
6MECH2400: Mechanical Design 1
6AMME2262: Thermal Engineering 1
0ENGP2001: Professional Engagement Program 2A

Year 3 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6Science Units
6MECH3362: Materials 2
6AMME2700: Instrumentation
0ENGP2002: Professional Engagement Program 2B
6MECH3660: Manufacturing Engineering

Year 3 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6MECH3361: Mechanics of Solids 2
6MECH3260: Thermal Engineering 2
6MECH3460: Mechanical Design 2
6Science Units
0ENGP2003: Professional Engagement Program 2C

Year 4 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6MECH3261: Fluid Mechanics 2
0ENGP3001: Professional Engagement Program 3A
6AMME3500: System Dynamics and Control
6ENGG3112: Interdisciplinary Engineering
6Science Units

Year 4 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6Mechanical Stream Elective Units
18Select from
Science Units
0ENGP3002: Professional Engagement Program 3B

Year 5 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
12Select from
Science Units
List
6Select from
Mechanical Stream Elective Units
Science Units


Note:  As there are 12cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 12cp of electives from either Engineering or Science, or a combination of both.

Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
6AMME4111: Thesis A

Year 5 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
List
6Select from
Mechanical Stream Elective Units
Science Units


Note:  As there are 12cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 12cp of electives from either Engineering or Science, or a combination of both.

Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
6AMME4112: Thesis B
12Select from
Science Units

No streams/majors defined for this course version.

Block 0 - Introductory Computing Units (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
ENGG1810 Introduction to Engineering Computing 6 Semester 1
Semester 2
INFO1110 Introduction to Programming 6 Semester 1
Semester 2
INFO1910 Introduction to Programming (Advanced) 6 Semester 1
Semester 2

Note: Students must complete:

-6cp from ENGG1810 or (INFO1110 or INFO1910). For Mechanical stream students it is recommended that ENGG1810 is taken.

Block 1 - Foundation Mathematics Units (Min CP: 12,Max CP: 12)

Unit Code Unit Name CP Sessions Offered
MATH1002 Linear Algebra 3 Semester 1
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 2
Summer Main
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 12cp including:

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

Block 2 - Projects Table (Min CP: 24,Max CP: 24)

Unit Code Unit Name CP Sessions Offered
AERO1560 Introduction to Aerospace Engineering 6 Semester 1
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
BMET1960 Biomedical Engineering 1A 6 Semester 1
CHNG1108 Introduction to Chemical Engineering 6 Semester 1
CIVL1900 Introduction to Civil Engineering 6 Semester 1
ELEC1004 Practical Introduction to Electrical Engineering 6 Semester 1
Semester 2
ENGG3112 Interdisciplinary Engineering 6 Semester 1
Semester 2
MECH1560 Introduction to Mechanical Engineering 6 Semester 1
MTRX1701 Introduction to Mechatronic Engineering 6 Semester 1

Note: - Students are to select the introduction unit relevant to their stream. Students in both Electrical and Software Engineering streams are to take ELEC1004.

- Students enrolled in the Dalyell Stream may count any Dalyell unit in place of ENGG2112 and may count any Engineering Dalyell unit in place of ENGG3112

- Students are to select the thesis units relevant to their stream. Aeronautical, Mechanical and Mechatronic students are to enrol in the AMME coded units. Students in both Electrical and Software are to enrol in the ELEC coded units.

Block 3 - Professional Engagement Program (PEP) Units

Unit Code Unit Name CP Sessions Offered
ENGP1001 Professional Engagement Program 1A 0 Semester 1
Semester 2
ENGP1002 Professional Engagement Program 1B 0 Semester 1
Semester 2
ENGP1003 Professional Engagement Program 1C 0 Semester 1
Semester 2
ENGP2001 Professional Engagement Program 2A 0 Semester 1
Semester 2
ENGP2002 Professional Engagement Program 2B 0 Semester 1
Semester 2
ENGP2003 Professional Engagement Program 2C 0 Semester 1
Semester 2
ENGP3001 Professional Engagement Program 3A 0 Semester 1
Semester 2
ENGP3002 Professional Engagement Program 3B 0 Semester 1
Semester 2

Note: -Candidates for the Bachelor of Engineering Honours must complete the Professional Engagement Program units of study.

- Candidates must enrol in ENGP1001 in their first semester of study

Block 4 - Mechanical Stream Core (Min CP: 96,Max CP: 96)

Unit Code Unit Name CP Sessions Offered
AMME1362 Materials 1 6 Semester 2
AMME1802 Engineering Mechanics 6 Semester 2
AMME2000 Engineering Analysis 6 Semester 1
AMME2261 Fluid Mechanics 1 6 Semester 1
AMME2262 Thermal Engineering 1 6 Semester 2
AMME2301 Mechanics of Solids 1 6 Semester 2
AMME2500 Engineering Dynamics 6 Semester 1
AMME2700 Instrumentation 6 Semester 1
AMME3500 System Dynamics and Control 6 Semester 1
MECH2400 Mechanical Design 1 6 Semester 2
MECH3260 Thermal Engineering 2 6 Semester 2
MECH3261 Fluid Mechanics 2 6 Semester 1
MECH3361 Mechanics of Solids 2 6 Semester 2
MECH3362 Materials 2 6 Semester 1
MECH3460 Mechanical Design 2 6 Semester 2
MECH3660 Manufacturing Engineering 6 Semester 1

Block 5 - Mechanical Stream Elective Units (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
AERO5750 Unmanned Air Vehicle Systems 6 Semester 2
AMME3060 Engineering Methods 6 Semester 2
AMME4401 Industrial and Product Design Engineering 6 Semester 2
AMME5060 Advanced Computational Engineering 6 Semester 2
AMME5101 Energy and the Environment 6 Semester 1
AMME5104 Applied Safety Systems and Risk Analysis 6 Semester 1
AMME5105 Risk Management Analysis 6 Semester 1
AMME5202 Computational Fluid Dynamics 6 Semester 1
AMME5271 Computational Nanotechnology 6 Semester 2
AMME5292 Advanced Fluid Dynamics 6 Semester 1
AMME5310 Engineering Tribology 6 Semester 1
AMME5510 Vibration and Acoustics 6 Semester 2
AMME5520 Advanced Control and Optimisation 6 Semester 1
AMME5902 Computer Aided Manufacturing 6 Semester 2
AMME5912 Crash Analysis and Design 6 Semester 1
MECH2401 Human-Centred Engineering Design 6 Semester 2
MECH4460 Mechanical Design 3 6 Semester 1
MECH4660 Engineering Management [not running in 2019] 6 Semester 1
MECH5255 Air Conditioning and Refrigeration 6 Semester 2
MECH5265 Combustion 6 Semester 2
MECH5275 Renewable Energy 6 Semester 2
MECH5304 Materials Failure 6 Semester 2
MECH5305 Smart Materials 6 Semester 2
MECH5310 Advanced Engineering Materials 6 Semester 1
MECH5311 Microscopy and Microanalysis of Materials 6 Semester 1

Block 10 - Science Units (Min CP: 84,Max CP: 96)

Note: Candidates must complete 96 credit points of Science study, including at least one major in a Science subject area and 12 credit points of OLEs. Math units taken as part of the Engineering component may be counted towards the 96 cp total. See Science faculty handbook for list of Science units and majors: http://sydney.edu.au/handbooks/science/

Course: Mechanical / Science (2021)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: 5.00 Years
Faculty/School: Faculty of Engineering
Years Offered: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015
Requirements: Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 6 credit points of Introductory Computing units table

► 12 credit points of Foundation Mathematics units table (12cp of MATH1* can count towards Science requirements)

► 24 credit points of Project table

► The Professional Engagement Program (PEP) units comprising ENGP1001 (0cp), ENGP1002 (0cp), ENGP1003 (0cp), ENGP2001 (0cp), ENGP2002 (0cp), ENGP2003 (0cp), ENGP3001 (0cp) and ENGP3002 (0cp)

► 96 credit points of Mechanical Stream core units

► 6 credit points of Mechanical Stream electives

Science (96 credit points):

► *12 credit points of Science degree core units (12cp of MATH1XXX can count towards Engineering requirements)

► *48 credit points of Table A major

► 12 credit points of OLE units

► 24 credit points of electives from Science Table A or Table S

* The Science degree core units comprise 12 cp of MATH1xxx units and 12cp of 1000-level units from Table A. The 1000-level units from the Table A major count towards Science degree core requirement.

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/
Report Type: