Note: This course version is currently under review and is subject to change.

ProgramsEngBE Hons 2015+MYE2015+Mechanical Mid-Year (2018)


Show information forcommencing students (ie. started First Year then).
 
Faculty of Engineeringengineering.undergraduate@sydney.edu.au


Print View | Download as PDF Administrative Information (Fees, ATAR etc.)

Select plan for Major/Pathway

Year 1 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6AMME1362: Materials 1
3MATH1021: Calculus of One Variable
6ENGG1802: Engineering Mechanics
6MECH1400: Mechanical Construction
3MATH1005: Statistics
0ENGP1000: Professional Engagement Program 1


Note:  All students must enrol in ENGP1000 in their first semester of enrolment.

Note:   MATH1021 and MATH1005 may be replaced by advanced units MATH1921 and MATH1905.


Year 2 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
3MATH1023: Multivariable Calculus and Modelling
6ENGG1801: Engineering Computing
6MECH1560: Introduction to Mechanical Engineering
6ENGG1111: Integrated Engineering 1
3MATH1002: Linear Algebra

Note:   MATH1023 and MATH1002 may be replaced by advanced units MATH1923 and MATH1902.


Year 2 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
2ENGG2111: Integrated Engineering 2
6AMME2262: Thermal Engineering 1
6MECH2400: Mechanical Design 1
6AMME2301: Mechanics of Solids 1
6MECH2401: Human-Centred Engineering Design

Year 3 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6AMME2000: Engineering Analysis
6AMME2261: Fluid Mechanics 1
6AMME2700: Instrumentation
6AMME2500: Engineering Dynamics
0ENGP2000: Professional Engagement Program 2


Note:  Enrolment in ENGP2000 is reliant on successful completion of ENGP1000. As such, the placement of ENGP2000 in this structure is example only, and actual enrolment in ENGP2000 is dependent on the time taken to complete ENGP1000.

Year 3 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6Select from
AMME3060: Engineering Methods
or other units.
6MECH3260: Thermal Engineering 2
6MECH3460: Mechanical Design 2
6MECH3361: Mechanics of Solids 2

Year 4 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
2ENGG3111: Integrated Engineering 3
6AMME3500: System Dynamics and Control
6MECH3261: Fluid Mechanics 2
6MECH3660: Manufacturing Engineering
6MECH3362: Materials 2

Year 4 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6Mechanical Specialist Electives
6Mechanical Specialist Electives
6Engineering General Electives
6AMME4111: Thesis A
0ENGP3000: Professional Engagement Program 3


Note:  Enrolment in ENGP3000 is reliant on successful completion of ENGP2000. As such, the placement of ENGP3000 in this structure is example only, and actual enrolment in ENGP3000 is dependent on the time taken to complete ENGP2000.

Note:   A minimum of 42 credit points must be completed across the degree as a whole from units listed in the Mechanical Specialist table, with no more than 6 credit points (one unit) from general electives.


Year 5 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
2ENGG4111: Integrated Engineering 4
6Mechanical Specialist Electives
6Mechanical Specialist Electives
6AMME4112: Thesis B

Note:   A minimum of 42 credit points must be completed across the degree as a whole from units listed in the Mechanical Specialist table, with no more than 6 credit points (one unit) from general electives.


48cp Majors

Type CP CP From
View complete Program Structure

Note: From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.

You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors

Major in Environmental Engineering (24cp)

Major in Materials (24cp)

Type CP CP From
Core
6 MECH3362: Materials 2
Core
6 MECH5304: Materials Failure
Core
6 MECH5305: Smart Materials
Core
6 MECH5310: Advanced Engineering Materials
View complete Program Structure

Note: This major focuses on development of an understanding of the relationship between properties of materials and their relationship to engineering design. Concepts covered include: mechanical properties; fracture and fatigue mechanics; composite materials; ceramics and glasses; structure- property relationships; and selection of materials.

The major is available to students who complete the four units listed (24 cp).

Major in Space Engineering (24cp)

Type CP CP From
Core
6 AERO2705: Space Engineering 1


Note: Replaces MECH2401
Core
6 AERO3760: Space Engineering 2


Note: Replaces MECH3460
Core
6 AERO4701: Space Engineering 3
6 Select from Unit Block Space Specialist Electives


Note: Required for the completion of the Space Major.
View complete Program Structure

Note: This major is available to students who complete the 24 cp of units of study listed and meet progression requirements. There are ATAR (>99) or WAM (>75%) entry requirements for this major.

Block 1 - Space Specialist Electives (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
AERO4260 Aerodynamics 2 6 Semester 1
AERO4360 Aerospace Structures 2 6 Semester 1
AERO4560 Flight Mechanics 2 6 Semester 2
AERO5700 Space Engineering (Advanced) 6 Semester 1
Semester 2
AMME5202 Computational Fluid Dynamics 6 Semester 1
AMME5510 Vibration and Acoustics 6 Semester 2

Block 2 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
CHNG4203 Major Industrial Project 24 Semester 1
Semester 2
CHNG4811 Thesis A 6 Semester 1
Semester 2
CHNG4812 Thesis B 6 Semester 1
Semester 2
CIVL4022 Thesis A 6 Semester 1
Semester 2
CIVL4023 Thesis B 6 Semester 1
Semester 2
ELEC4712 Thesis A 6 Semester 1
Semester 2
ELEC4713 Thesis B 6 Semester 1
Semester 2
ELEC4714 Major Industrial Project 24 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
Semester 2
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4111 Integrated Engineering 4 2 Semester 1
Semester 2
ENGP1000 Professional Engagement Program 1 0 Semester 1
Semester 2
ENGP2000 Professional Engagement Program 2 0 Semester 1
Semester 2
ENGP3000 Professional Engagement Program 3 0 Semester 1
Semester 2
MATH1002 Linear Algebra 3 Semester 1
Summer Main
MATH1005 Statistics 3 Semester 2
Summer Main
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream or major.

Block 3 - Mechanical Specialist Electives (Min CP: 42,Max CP: 48)

Unit Code Unit Name CP Sessions Offered
AERO5750 Unmanned Air Vehicle Systems 6 Semester 2
AMME3060 Engineering Methods 6 Semester 2
AMME5101 Energy and the Environment 6 Semester 1
AMME5105 Risk Management Analysis 6 Semester 1
AMME5202 Computational Fluid Dynamics 6 Semester 1
AMME5271 Computational Nanotechnology 6 Semester 2
AMME5292 Advanced Fluid Dynamics 6 Semester 1
AMME5310 Engineering Tribology 6 Semester 1
AMME5510 Vibration and Acoustics 6 Semester 2
AMME5520 Advanced Control and Optimisation 6 Semester 1
AMME5902 Computer Aided Manufacturing 6 Semester 2
AMME5912 Crash Analysis and Design 6 Semester 1
MATH2021 Vector Calculus and Differential Equations 6 Semester 1
MATH2921 Vector Calculus and Differential Equations (Adv) 6 Semester 1
MECH1400 Mechanical Construction 6 Semester 2
MECH2401 Human-Centred Engineering Design 6 Semester 2
MECH4460 Mechanical Design 3 6 Semester 1
MECH4660 Engineering Management [not running in 2019] 6 Semester 1
MECH5255 Air Conditioning and Refrigeration 6 Semester 2
MECH5265 Combustion 6 Semester 2
MECH5275 Renewable Energy 6 Semester 2
MECH5304 Materials Failure 6 Semester 2
MECH5305 Smart Materials 6 Semester 2
MECH5310 Advanced Engineering Materials 6 Semester 1

Note: At least 7 units (42 cp) must be completed.

Block 4 - Engineering General Electives (Max CP: 6)

Unit Code Unit Name CP Sessions Offered
ENGG1000 History and Philosophy of Engineering 6 Semester 1
Semester 2

Note: Students may take 6 credit points of free general electives to complete the total number of credit points for their degree. Students may take the following units of study as free general electives, provided they satisfy any prerequisite, quota, departmental permission or any other requirements of the units, and the units are not essentially the same or prohibited units for any of the other units in their degree.

(1) Any units of study from the Faculties of: (i) Engineering and Information Technologies (ii) Science (iii) Arts (iv) Sydney Business School

(2) Any other units of study approved by the Faculty of Engineering and Information Technologies Courses Committee, which will be published in an appropriate place by the Faculty.

(3) Any units of study approved by the Dean (or his/her delegate in these matters), or by the relevant Head of School or Program Director, on a case by case basis upon application by the student.

Block 5 - Mechanical Stream Core (Min CP: 108,Max CP: 108)

Unit Code Unit Name CP Sessions Offered
AMME1362 Materials 1 6 Semester 2
AMME2000 Engineering Analysis 6 Semester 1
AMME2261 Fluid Mechanics 1 6 Semester 1
AMME2262 Thermal Engineering 1 6 Semester 2
AMME2301 Mechanics of Solids 1 6 Semester 2
AMME2500 Engineering Dynamics 6 Semester 1
AMME2700 Instrumentation 6 Semester 1
AMME3500 System Dynamics and Control 6 Semester 1
ENGG1801 Engineering Computing 6 Semester 1
Summer Late
ENGG1802 Engineering Mechanics 6 Semester 2
Summer Main
Int January
MECH1560 Introduction to Mechanical Engineering 6 Semester 1
MECH2400 Mechanical Design 1 6 Semester 2
MECH3260 Thermal Engineering 2 6 Semester 2
MECH3261 Fluid Mechanics 2 6 Semester 1
MECH3361 Mechanics of Solids 2 6 Semester 2
MECH3362 Materials 2 6 Semester 1
MECH3460 Mechanical Design 2 6 Semester 2
MECH3660 Manufacturing Engineering 6 Semester 1
Course: Mechanical Mid-Year (2018)
CP Required: 192
Min FT Duration: 4.00 Years
Min PT Duration: 4.00 Years
Faculty/School: Faculty of Engineering
Years Offered: 2020, 2019, 2018, 2017, 2016
Requirements: Summary

In summary the requirements are:

Students must complete 192 credit points as follows:

► 36 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of Mechanical stream core units

► A minimum of 42 credit points of Mechanical Specialist elective units

► A maximum of 6 credit points of General (Free) Electives

The completion of a major is not necessary. If a student chooses to do a major, aligned majors can be completed within the 192 credit points described above.

Handbook Rules

The handbook rules governing this degree are as follows:

To qualify for the award of the Bachelor of Engineering Honours degree, a candidate must:

(a) successfully complete 192 credit points comprising:

(i) A minimum of 36 credit points from the Engineering Core Table, including all required units;

(ii) A minimum of 108 credit points from the Engineering Stream Table pertaining to the specialist stream being undertaken, including all required units;

(iii) A minimum of 48 credit points of additional units from the Engineering Stream Specialist Table pertaining to the specialist stream being undertaken, including satisfying any additional requirements specified for the Specialist Table.

(b) Successfully complete the requirements of the Professional Engagement Program

(2) The class of Honours will be determined by the EIHWAM.

(3) In exceptional circumstances, the Dean may vary the conditions for the award of Honours after seeking the advice of the relevant Head of School.

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester's standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Majors

A major requires:

(a) the completion of 24 credit points chosen from units of study listed in the table for that major;

(b) satisfying any additional requirements specified for the major, and listed with the table of units for the major;

(c) the completion of a thesis project that has been approved by the Head of School (or delegate) as relevant to the topic of the major.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/
Report Type: