1. Overview

Course:	Master of Professional Engineering (Biomedical) (2017)
CP Required:	144
Min FT Duration:	3.00 Years
Min PT Duration:	N/A
Faculty/School:	Faculty of Engineering
Years Offered:	2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2010

2. Requirements

To qualify for the award of the Master of Professional Engineering in this specialisation, a candidate must complete 144 credit points, including core and elective units of study as listed here.

Admission to candidature

Admission to candidature requires: EITHER (a) a Bachelor of Engineering from the University of Sydney, OR (b) equivalent qualification, with a minimum credit average; OR (c) a non-engineering bachelor's degree with a minimum credit average, with studies equivalent to 48 credit points in mathematics, physics, chemistry, biology, geology, computing or statistics, as related to the intended engineering specialisation.

All candidates for admission must have prior learning equivalent to 48 credit points in total, which, in the estimation of the Dean, is comparable to the requirements for the first year of a Bachelor of Engineering at this University in the stream sought for admission.

Credit for previous study

Candidates with a Bachelor of Engineering or equivalent in the relevant discipline, and who have reached an acceptable level of academic achievement in their prior degree, may be eligible for a reduction of volume in learning of up to 48 credit points.

A maximum of 72 credit points may be granted towards the Master of Professional Engineering from external postgraduate studies where no award has been, or will be made, provided the studies are acceptable to the Program Director Dean and are equivalent to units of study offered in the Master of Professional Engineering.

Candidates transferring from the Master of Engineering to the Master of Professional Engineering may transfer up to 24 credit points provided units are equivalent to units of study offered in the Master of Professional Engineering. Any additional credit is subject to the approval by the Dean.

Progression

Candidates are subject to the progression requirements as defined in the University of Sydney "Students at Risk" policy.

Transitional provisions

These rules apply to students who commenced their candidature after 1 January 2015 and students who commenced their candidature prior to 1 January 2015 who elect to proceed under these resolutions.

Candidates who commenced prior to 1 January 2015 may complete the requirements in accordance with the resolutions in force at the time of their commencement.

Changes from 2015

Students continuing from 2014 and earlier should note changes of code and name for previous "Foundations" units. The unit code on these units has changed from "5xxx" format to "9xxx" and the prefix "Foundations of" has been dropped. The name and content of these units, otherwise remains as previous. Level 5xxx "Foundations" units that have already been completed will be credited towards the degree in place of the equivalent 9xxx unit.

Course resolutions

This course is administered under course resolutions published in the Faculty Handbook at http://sydney.edu.au/handbooks/

3. Semesters

Note: Year One covers Foundation units only. Candidates with a prior Bachelor of Engineering degree or equivalent in the field related to this specialisation may be exempted from Foundation units.

Note: Year 1 covers foundation units only. Students with a prior Bachelor of Engineering degree or equivalent in the field related to this specialisation are exempt from these foundation units.

4. Pathways

Extended Capstone Project

Type	CP	CP From
Core	12	AMME5022: Capstone Project B Extended Note: Students achieving an average mark of 70% or higher over 48 credit points of units of study in the previous year are eligible for the Extended Capstone Project. AMME5022 replaces AMME5021 and a 6cp elective unit. Biomedical students should be taking replacement unit BMET5022

Note: Students take Capstone Project units AMME5020 and AMME5022 (total 18 cp) in place of Capstone Project AMME5020/AMME5021 and 6 cp of elective units.

MIPP Pathway (Major Industrial Project Placement)

Type	CP	CP From
Core	24	AMME5010: Major Industrial Project Note: Biomedical students should be taking replacement unit BMET5010

Note: Candidates undertaking the Major Industrial Project take AMME5010 in place of ENGG5217 Practical Experience, AMME5020/5021 Capstone Project A & B and 12 credit points of Specialist Elective units of study.

Research Pathway

Type	CP	CP From
Core	12	AMME5222: Dissertation A Note: Students achieving an average mark of 75% or higher over 48 credit points of units of study in the Year Two Table or equivalent are eligible for the Research Pathway. AMME5222 replaces AMME5020 and a 6cp elective unit. Biomedical students should be taking replacement unit BMET5222
Core	12	AMME5223: Dissertation B Note: Students achieving an average mark of 75% or higher over 48 credit points of units of study in the Year Two Table or equivalent are eligible for the Research Pathway. AMME5223 replaces AMME5021 and a 6cp elective unit. Biomedical students should be taking replacement unit BMET5223

Note: Research pathway students take Dissertation units AMME5222 and AMME5223 (total 24 cp) in place of Capstone Project units and 12 cp of elective units.

Student Industrial Placement Scheme Pathway

Type	CP	CP From
Core	24	AMME5010: Major Industrial Project Note: Candidates undertaking the Major Industrial Project take AMME5010 in place of ENGG5217 Practical Experience, AMME5020/5021 Capstone Project A & B and 12 credit points of Specialist Elective units of study. Biomedical students should be taking replacement unit BMET5010

5. Unit Blocks

Block 1 - Biomedical Electives (Min CP: 18,Max CP: 18)

Unit Code	Unit Name	CP	Sessions Offered
AERO9301	Applied Finite Element Analysis	6	Semester 1
AMME5202	Computational Fluid Dynamics	6	Semester 1
AMME5271	Computational Nanotechnology	6	Semester 2
AMME5310	Engineering Tribology	6	Semester 1
AMME5520	Advanced Control and Optimisation	6	Semester 1
AMME5790	Introduction to Biomechatronics	6	Semester 2
AMME5902	Computer Aided Manufacturing	6	Semester 2
AMME5912	Crash Analysis and Design	6	Semester 1
AMME5931	Nanomaterials in Medicine	6	Semester 1
AMME5951	Fundamentals of Neuromodulation	6	Semester 1
AMME5958	Nanotechnology in Biomedical Engineering	6	Semester 2
AMME5962	Introduction to Mechanobiology	6	Semester 2
AMME5992	Regulatory Affairs in the Medical Industry	6	Semester 1 Semester 2
AMME5995	Advanced Bionics	6	Semester 1
CHNG5602	Biophysics and Biosensors	6	Semester 2
ENGG5011	Engineering Foundation Studies A	6	Semester 1 Semester 2 Int February Int July
ENGG5202	Sustainable Design, Engineering & Management	6	Semester 1
ENGG5203	Quality Engineering and Management	6	Semester 2
MECH5255	Air Conditioning and Refrigeration	6	Semester 2
MECH5275	Renewable Energy	6	Semester 2
MECH5304	Materials Failure	6	Semester 2
MECH5310	Advanced Engineering Materials	6	Semester 1
MECH5416	Design of Micro- and Nanosystems	6	Semester 1
MECH5720	Sensors and Signals	6	Semester 2
MECH5907	Orthopaedic and Surgical Engineering	6	Semester 2
MTRX5700	Experimental Robotics	6	Semester 1

Note: Candidates for Biomedical Specialisation must complete 12 credit points from among these units.

Block 2 - Exchange Units (Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
ENGG5231	Engineering Graduate Exchange A	6	Int January Int July
ENGG5232	Engineering Graduate Exchange B	6	Int January Int July

Note: Summer/Winter Exchange units require the approval of the Program Director. With approval, up to 12 credit points of Exchange units may taken in place of other units, towards the requirements of the degree.