1. Overview

Course:	Aeronautical / Law (2017)
CP Required:	288
Min FT Duration:	6.00 Years
Min PT Duration:	N/A
Faculty/School:	Faculty of Engineering
Years Offered:	2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

2. Requirements

In summary the requirements are:

Students must complete 288 credit points as follows:

Engineering (144 credit points):

► 24 credit points of Engineering core units

► 108 credit points of Aeronautical stream core units

► 12 credit points of Aeronautical Specialist elective units

Laws:

► 144 credit points of Laws core units

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For the Bachelor of Engineering and Bachelor of Laws combined degree, a candidate must complete 288 credit points and any additional requirements specified in the following clauses.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering

For the Bachelor of Engineering component of a combined degree:

(a) The units of study that may be taken for the Bachelor of Engineering component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering single degree;

(b) Except where approved, all candidates must complete a minimum of 144 credit points comprising:

(i) 36cp from the Engineering Core Table, including all required units;

(ii) 108cp from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Laws

For the Bachelor of Laws component of a combined degree:

Candidates must complete 144 credit points of Law units of study taken from the School of Law Undergraduate Table, comprising:

(a) 102 credit points of compulsory units of study; and

(b) 42 credit points of elective units of study, of which a maximum of 36 credit points are taken from Part 1 and a minimum of 6 credit points are taken from Part 2.

(c) Students may apply to take up to a maximum of 24 credit points of advanced learning Master’s units of study as elective units of study.

(i) Enrolment in Master’s units of study will be subject to availability and any unit pre-requisites or assumed knowledge, which may include relevant industry experience or prior specialist study.

(ii) Enrolment in Master’s units is only permitted after a candidate has completed 96 credit points towards the Bachelor of Laws.

(iii) Students may only enrol in Master’s units listed in the Bachelor of Laws Elective units of study Table.

Engineering Honours Requirements

(a) an EWAM of at least 65 immediately prior to the semester in which a thesis unit of study is first attempted; and

(b) have an EIHWAM of at least 65 at the completion of the degree; and

(c) complete the requirements within a time limit of 5 years for a single Bachelor of Engineering Honours degree or complete the requirements within a time limit of 6 years for a combined Bachelor of Engineering Honours combined degree.

Candidates who satisfy the requirements for the Engineering degree, but who have not satisfied each of Clauses (a), (b) and (c), will qualify for the award of the Bachelor of Engineering degree (i.e. the PASS degree, awarded without Honours).

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Majors

A major requires:

(a) the completion of 24 credit points chosen from units of study listed in the table for that major;

(b) satisfying any additional requirements specified for the major, and listed with the table of units for the major;

(c) the completion of a thesis project that has been approved by the Head of School (or delegate) as relevant to the topic of the major.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type	CP	CP From
Engineering Core	3	Select from MATH1001: Differential Calculus Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1021.
Aeronautical Stream Core	6	Select from AERO1560: Introduction to Aerospace Engineering
Aeronautical Stream Core	6	Select from ENGG1801: Engineering Computing
Law Junior Core	6	Select from LAWS1006: Foundations of Law
Engineering Core	3	Select from MATH1002: Linear Algebra

Note: MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.

Year 1 - Semester 2

Type	CP	CP From
Aeronautical Stream Core	6	Select from AMME1362: Introduction to Engineering Materials
Engineering Core	3	Select from MATH1003: Integral Calculus and Modelling Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1023.
Aeronautical Stream Core	6	Select from ENGG1802: Engineering Mechanics
Law Junior Core	6	Select from LAWS1012: Torts
Law Junior Core	0	Select from LAWS1013: Legal Research 1
Engineering Core	3	Select from MATH1005: Statistical Thinking with Data

Note: MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.

Year 2 - Semester 1

Type	CP	CP From
Law Junior Core	6	Select from LAWS1014: Civil and Criminal Procedure
Aeronautical Stream Core	6	Select from AMME2261: Fluid Mechanics 1
Aeronautical Stream Core	6	Select from AMME2500: Engineering Dynamics
Aeronautical Stream Core	6	Select from AMME2700: Instrumentation

Year 2 - Semester 2

Type	CP	CP From
Law Junior Core	6	Select from LAWS1016: Criminal Law
Aeronautical Stream Core	6	Select from AERO2703: Aircraft Performance and Operations
Aeronautical Stream Core	6	Select from AMME2301: Mechanics of Solids
Aeronautical Stream Core	6	Select from MECH2400: Mechanical Systems Design 1

Year 3 - Semester 1

Type	CP	CP From
Law Junior Core	6	Select from LAWS1015: Contracts
Law Junior Core	0	Select from LAWS1019: Legal Research II
Aeronautical Stream Core	6	Select from AERO3360: Aerospace Structures 1
Aeronautical Stream Core	6	Select from AERO3460: Aerospace Design 1
Aeronautical Stream Core	6	Select from AMME3500: System Dynamics and Control

Year 3 - Semester 2

Type	CP	CP From
Law Junior Core	6	Select from LAWS1017: Torts and Contracts II
Aeronautical Stream Core	6	Select from AMME2262: Introduction to Thermal Engineering
Aeronautical Stream Core	6	Select from AERO3260: Aerodynamics 1
Aeronautical Stream Core	6	Select from AERO3560: Flight Mechanics 1

Year 4 - Semester 1

Type	CP	CP From
Law Junior Core	6	Select from LAWS1023: Public International Law
Aeronautical Stream Core	6	Select from AERO3261: Propulsion
Aeronautical Stream Core	6	Select from AERO4460: Aerospace Design 3
Engineering Core	6	Select from AMME4111: Thesis A
Engineering Core	0	Select from ENGG4000: Practical Experience

Year 4 - Semester 2

Type	CP	CP From
Law Junior Core	6	Select from LAWS1021: Public Law
Engineering Core	6	Select from AMME4112: Thesis B
Aeronautical Specialist Electives	12	Select from Unit Block: Aeronautical Specialist Electives

Year 5 - Semester 1

Type	CP	CP From
Law Senior Core	6	Select from LAWS2010: Administrative Law
Law Senior Core	6	Select from LAWS2011: Federal Constitutional Law
Law Senior Core	6	Select from LAWS2013: The Legal Profession
Law Senior Core	6	Select from LAWS2012: Intro to Property and Commercial Law

Note: To progress to the final two years of the combined Law degree students must have completed all requirements for the award ot Bachelor of Engineering Honours. Students will be awarded the Engineering component of this combined degree at the end of 4th year. Students will then be under the jurisdiction of the Law School for the final two years.

Year 5 - Semester 2

Type	CP	CP From
Law Senior Core	6	Select from LAWS2014: Corporations Law
Law Senior Core	6	Select from LAWS2015: Equity
Law Senior Core	6	Select from LAWS2017: Real Property
Law Senior Core	6	Select from LAWS2016: Evidence

Year 6 - Semester 1

Type	CP	CP From
Law Senior Core	6	Select from LAWS2018: Private International Law A
Law Senior Electives	18	Select from Unit Block: Law Senior Electives

Note: In year 6 students are required to complete LAWS2018 Private International Law A plus 42 credit points from Semester 1 Senior Elective Units as listed in Law Faculty Handbook Table 1. See Law Faculty Handbook for more details: http://sydney.edu.au/handbooks/law/

LAWS2018 may be taken in Semester 1 or Semester 2. Students who commenced the Combined Law program before 2011 do not need to complete LAWS2018 but must complete 48 credit points of Law Senior Elective units of study rather than 42 credit points.

Year 6 - Semester 2

Type	CP	CP From
Law Senior Electives	24	Select from Unit Block: Law Senior Electives

4. Pathways

48cp Majors

Type

CP

CP From

Note: From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.

You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors

Major in Space Engineering (24cp)

Type	CP	CP From
Core	6	AERO2705: Space Engineering 1 Note: Replacing AERO2703
Core	6	AERO3760: Space Engineering 2 Note: Replaces AERO3260 in Year 3 Semester 2. AERO3260 can be taken in Year 4 Semester 2 in place of a specialist electives slot.
Core	6	AERO4701: Space Engineering 3 Note: Replacing AERO4460
Space Specialist Electives	6	Select from Unit Block Space Specialist Electives

Note: Students are required to complete 24cp as per the table to be eligible of this major. There are minimum ATAR or WAM (>75%) entry requirements for enrolment in this major.

5. Unit Blocks

Block 1 - Aeronautical Specialist Electives (Min CP: 12,Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
AERO4260	Aerodynamics 2	6	Semester 1
AERO4360	Aerospace Structures 2	6	Semester 1
AERO4560	Flight Mechanics 2	6	Semester 2

Block 2 - Space Specialist Electives (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
AERO4260	Aerodynamics 2	6	Semester 1
AERO4360	Aerospace Structures 2	6	Semester 1
AERO4560	Flight Mechanics 2	6	Semester 2
AERO5700	Space Engineering (Advanced)	6	Semester 1 Semester 2

Block 3 - Engineering Core (Min CP: 24,Max CP: 24)

Unit Code	Unit Name	CP	Sessions Offered
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
ENGG4000	Practical Experience	0	Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December
MATH1001	Differential Calculus	3	Semester 1 Summer Main
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1003	Integral Calculus and Modelling	3	Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January

Block 4 - Aeronautical Stream Core (Min CP: 108,Max CP: 108)

Unit Code	Unit Name	CP	Sessions Offered
AERO1560	Introduction to Aerospace Engineering	6	Semester 1
AERO2703	Aircraft Performance and Operations	6	Semester 2
AERO3260	Aerodynamics 1	6	Semester 2
AERO3261	Propulsion	6	Semester 1
AERO3360	Aerospace Structures 1	6	Semester 1
AERO3460	Aerospace Design 1	6	Semester 1
AERO3560	Flight Mechanics 1	6	Semester 2
AERO4460	Aerospace Design 3	6	Semester 1
AMME1362	Introduction to Engineering Materials	6	Semester 2
AMME2261	Fluid Mechanics 1	6	Semester 1
AMME2262	Introduction to Thermal Engineering	6	Semester 2
AMME2301	Mechanics of Solids	6	Semester 2
AMME2500	Engineering Dynamics	6	Semester 1
AMME2700	Instrumentation	6	Semester 1
AMME3500	System Dynamics and Control	6	Semester 1
ENGG1801	Engineering Computing	6	Semester 1 Int January
ENGG1802	Engineering Mechanics	6	Semester 2 Summer Main Int January
MECH2400	Mechanical Systems Design 1	6	Semester 1

Block 5 - Law Junior Core (Min CP: 48,Max CP: 48)

Unit Code	Unit Name	CP	Sessions Offered
LAWS1006	Foundations of Law	6	Semester 1
LAWS1012	Torts	6	Semester 2 S1 Intensive
LAWS1013	Legal Research 1	0	Semester 1 Semester 2
LAWS1014	Civil and Criminal Procedure	6	Semester 1
LAWS1015	Contracts	6	Semester 1 Semester 2 Summer Early
LAWS1016	Criminal Law	6	Semester 1 Semester 2
LAWS1017	Torts and Contracts II	6	Semester 1 Semester 2 Winter Main
LAWS1019	Legal Research II	0	Semester 1 Semester 2
LAWS1021	Public Law	6	Semester 2 Int February
LAWS1023	Public International Law	6	Semester 1 Winter Main

Block 6 - Law Senior Core (Min CP: 54,Max CP: 54)

Unit Code	Unit Name	CP	Sessions Offered
LAWS2010	Administrative Law	6	Semester 1
LAWS2011	Federal Constitutional Law	6	Semester 1
LAWS2012	Intro to Property and Commercial Law	6	Semester 1
LAWS2013	The Legal Profession	6	Semester 1
LAWS2014	Corporations Law	6	Semester 2 Winter Main
LAWS2015	Equity	6	Semester 2 Summer Main
LAWS2016	Evidence	6	Semester 2 Summer Early
LAWS2017	Real Property	6	Semester 2 Winter Main
LAWS2018	Private International Law A	6	Semester 1 Semester 2

Block 7 - Law Senior Electives (Min CP: 42,Max CP: 42)

Note: Electives are chosen from the list of senior LAW units as listed in the Law School faculty handbook.

Faculty of Engineering

Aeronautical / Law (2017)