Faculty of Engineering

Aeronautical / Science (2019)


Note: This course version applies only to students first enrolling in 2019.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Aeronautical / Science (2019)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: 5.00 Years
Faculty/School: Faculty of Engineering
Years Offered: 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

2. Requirements

Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units (12cp of MATH1* can count towards Science requirements)

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of Aeronautical Stream core units

► Up to 12 credit points of Aeronautical Stream elective units

Science (96 credit points):

► *12 credit points of Science degree core units (12cp of MATH1XXX can count towards Engineering requirements)

► *48 credit points of Table A major

► 12 credit points of OLE units

► 24 credit points of electives from Science Table A or Table S

* The Science degree core units comprise 12 cp of MATH1xxx units and 12cp of 1000-level units from Table A. The 1000-level units from the Table A major count towards Science degree core requirement.

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Science

For the Bachelor of Science component of a combined degree:

(a) The units of study that may be taken are set out in Table A of the Faculty of Science, and Table S and Table O of the Shared Pool for Undergraduate Degrees.

(b) Candidates must complete 96 credit points in the Bachelor of Science including:

(i) any required degree core units as set out in Table A of the Faculty of Science; and

(ii) a major (48 credit points) or a 3-year program with an embedded major from Table A of the Faculty of Science; and

(iii) 12 credit points of units of study in the Open Learning Environment as listed in Table O; and

(iv) where appropriate, additional electives from Table A of the Faculty of Science or Table S;

(v) If enrolled in a stream, complete the requirements for the stream as specified in Table A of the Faculty of Science.

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type CP CP From
6 Select from Unit Block:
Science Units
6 Select from ENGG1801: Engineering Computing


Note: Students wishing to major in Computer Science can replace ENGG1801 with INFO1110.
3 Select from MATH1021: Calculus of One Variable
3 Select from MATH1002: Linear Algebra
6 Select from AERO1560: Introduction to Aerospace Engineering
0 Select from ENGP1000: Professional Engagement Program 1


Note: All students must enrol in ENGP1000 in their first semester of enrolment.

New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 1 - Semester 2

Type CP CP From
6 Select from Unit Block:
Science Units
3 Select from MATH1023: Multivariable Calculus and Modelling
6 Select from AMME1362: Introduction to Engineering Materials
6 Select from ENGG1802: Engineering Mechanics
3 Select from MATH1005: Statistical Thinking with Data

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 2 - Semester 1

Type CP CP From
6 Select from Unit Block:
Science Units
6 Select from AMME2261: Fluid Mechanics 1
6 Select from AMME2500: Engineering Dynamics
6 Select from AMME2700: Instrumentation


Note: AMME2700 will be discontinued from 2024. Students who have not yet completed this unit should take AMME1705 in its place.

Note: Students completing a Physics major may exempt from AMME2500

Year 2 - Semester 2

Type CP CP From
6 Select from Unit Block:
Science Units
6 Select from ENGG1111: Integrated Engineering 1
6 Select from AMME2262: Introduction to Thermal Engineering
6 Select from AMME2301: Mechanics of Solids
0 Select from ENGP2000: Professional Engagement Program 2


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.

Year 3 - Semester 1

Type CP CP From
18 Select from Unit Block:
Science Units
6 Select from AMME3500: System Dynamics and Control

Year 3 - Semester 2

Type CP CP From
12 Select from Unit Block:
Science Units
2 Select from ENGG2111: Integrated Engineering 2
6 Select from AERO2703: Aircraft Performance and Operations
6 Select from MECH2400: Mechanical Systems Design 1


Note: From 2024, MECH2400 is offered in Semester 1 only. Students who have not completed MECH2400 should discuss an enrolment plan with their Academic Advisor.

Note: Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.

Year 4 - Semester 1

Type CP CP From
6 Select from AERO3261: Propulsion
6 Select from Unit Block:
Science Units
6 Select from AERO3360: Aerospace Structures 1
2 Select from ENGG3111: Integrated Engineering 3
6 Select from AERO3460: Aerospace Design 1
0 Select from ENGP3000: Professional Engagement Program 3


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.

Year 4 - Semester 2

Type CP CP From
12 Select from Unit Block:
Science Units
6 Select from AERO3560: Flight Mechanics 1
6 Select from AERO3260: Aerodynamics 1

Year 5 - Semester 1

Type CP CP From
2 Select from ENGG4111: Integrated Engineering 4
6 Select from Unit Block:
Aeronautical Stream Electives
6 Select from Unit Block:
Science Units
6 Select from AERO4460: Aerospace Design 3
6 Select from AMME4111: Thesis A

Note: Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.

Year 5 - Semester 2

Type CP CP From
6 Select from Unit Block:
Aeronautical Stream Electives
6 Select from Unit Block:
Science Units
6 Select from AMME4112: Thesis B

4. Pathways

Major in Space Engineering

Type CP CP From
6 Select from AERO1560: Introduction to Aerospace Engineering
12 Select from AMME4111: Thesis A
AMME4112: Thesis B
18 Select from AERO2705: Space Engineering 1
AERO3760: Space Engineering 2
AERO4701: Space Engineering 3
6 Select from Unit Block Space Specialist Electives


Note: Students in a combined degree are required to take only 6 cp of Space Specialist Electives

Note: To be eligible for this major, students are required to meet progression requirements. There are ATAR or High WAM (>75%) requirements for entry to this major.

Students undertaking this major are not required to do Integrated Engineering units (ENGG1111, ENGG2111, ENGG3111, ENGG4111), and are exempt from AERO2703 and AERO4460.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
CHNG4203 Major Industrial Project 24 Semester 1
Semester 2
CHNG4811 Thesis A 6 Semester 1
Semester 2
CHNG4812 Thesis B 6 Semester 1
Semester 2
CIVL4022 Thesis A 6 Semester 1
Semester 2
CIVL4023 Thesis B 6 Semester 1
Semester 2
ELEC4712 Thesis A 6 Semester 1
Semester 2
ELEC4713 Thesis B 6 Semester 1
Semester 2
ELEC4714 Major Industrial Project 24 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4111 Integrated Engineering 4 2 Semester 1
ENGP1000 Professional Engagement Program 1 0 Semester 1
Semester 2
ENGP2000 Professional Engagement Program 2 0 Semester 1
Semester 2
ENGP3000 Professional Engagement Program 3 0 Semester 1
Semester 2
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 2 - Aeronautical Stream Core (Min CP: 108,Max CP: 108)

Unit Code Unit Name CP Sessions Offered
AERO1560 Introduction to Aerospace Engineering 6 Semester 1
AERO2703 Aircraft Performance and Operations 6 Semester 2
AERO3260 Aerodynamics 1 6 Semester 2
AERO3261 Propulsion 6 Semester 1
AERO3360 Aerospace Structures 1 6 Semester 1
AERO3460 Aerospace Design 1 6 Semester 1
AERO3560 Flight Mechanics 1 6 Semester 2
AERO4460 Aerospace Design 3 6 Semester 1
AMME1362 Introduction to Engineering Materials 6 Semester 2
AMME2261 Fluid Mechanics 1 6 Semester 1
AMME2262 Introduction to Thermal Engineering 6 Semester 2
AMME2301 Mechanics of Solids 6 Semester 2
AMME2500 Engineering Dynamics 6 Semester 1
AMME2700 Instrumentation 6 Semester 1
AMME3500 System Dynamics and Control 6 Semester 1
ENGG1801 Engineering Computing 6 Semester 1
Int January
ENGG1802 Engineering Mechanics 6 Semester 2
Summer Main
Int January
MECH2400 Mechanical Systems Design 1 6 Semester 1

Block 3 - Aeronautical Stream Electives (Max CP: 12)

Unit Code Unit Name CP Sessions Offered
AERO4260 Aerodynamics 2 6 Semester 1
AERO4360 Aerospace Structures 2 6 Semester 1
AERO4560 Flight Mechanics 2 6 Semester 2

Block 4 - Science Units (Min CP: 84,Max CP: 96)

Note: Candidates must complete 96 credit points of Science study, including at least one major in a Science subject area and 12 credit points of OLEs. Math units taken as part of the Engineering component may be counted towards the 96 cp total. See Science faculty handbook for list of Science units and majors: http://sydney.edu.au/handbooks/science/

Block 5 - Space Specialist Electives (Max CP: 12)

Unit Code Unit Name CP Sessions Offered
AERO4260 Aerodynamics 2 6 Semester 1
AERO4360 Aerospace Structures 2 6 Semester 1
AERO4560 Flight Mechanics 2 6 Semester 2
AERO5700 Space Engineering (Advanced) 6 Semester 1
Semester 2

Block 6 - Space Major Core (Max CP: 18)

Unit Code Unit Name CP Sessions Offered
AERO2705 Space Engineering 1 6 Semester 2
AERO3760 Space Engineering 2 6 Semester 2
AERO4701 Space Engineering 3 6 Semester 1

Note: These units are only available to students enrolled in the Space major. ATAR/WAM requirements apply.