2. Requirements

Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 24 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of Mechanical stream core units

► 12 credit points of Mechanical Specialist electives units

Commerce (96 credit points):

► 24 credit points of Commerce core units

► A major (48 credit points) from Table A of the Faculty of Commerce

► 12 credit points of OLE

► 12 credit points of elective units from Table A or Table S

The handbook rules governing this degree are as follows:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

To qualify for the award of the combined degree:

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Commerce

For the Bachelor of Commerce component of a combined degree:

(a) The units of study that may be taken are set out in Table A of The University of Sydney Business School.

(b) Candidates must complete 96 credit points of units of study selected from the Table of Undergraduate Units of Study from The University of Sydney Business School including:

(i) any required degree core units as set out in Table A of the University of Sydney Business School; and

(ii) a major (48 credit points) or a 3-year program with an embedded major (except for the Professional Accounting Program) from Table A of the University of Sydney Business School; and

(iii) 12 credit points of units of study in the Open Learning Environment as listed in Table O; and

(iv) where appropriate, additional electives from Table A of the University of Sydney Business School or Table S;

(v) If enrolled in a stream, complete the requirements for the stream as specified in Table A of the University of Sydney Business School.

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type	CP	CP From
Engineering Core	3	Select from MATH1021: Calculus of One Variable
Commerce Core	6	Select from BUSS1000: Future of Business Note: You must complete BUSS1000 in your first semester of enrolment.
Engineering Core	3	Select from MATH1002: Linear Algebra
Mechanical Stream Core	6	Select from MECH1560: Introduction to Mechanical Engineering
Mechanical Stream Core	6	Select from ENGG1801: Engineering Computing Note: ENGG1810 Introduction to Engineering Computing replaces ENGG1801 from 2021.
Engineering Core	0	Select from ENGP1000: Professional Engagement Program 1 Note: All students must enrol in ENGP1000 in their first semester of enrolment. New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 1 - Semester 2

Type	CP	CP From
Engineering Core	3	Select from MATH1023: Multivariable Calculus and Modelling
Mechanical Stream Core	6	Select from AMME1362: Introduction to Engineering Materials
Commerce Core	6	Select from BUSS1020: Quantitative Business Analysis
Engineering Core	3	Select from MATH1004: Discrete Mathematics Note: Students in BE(Hons)/BCom take BUSS1020 in place of BE(Hons) core unit MATH1005. In the spare 3 cp slot, students are advised to take MATH1004.
Mechanical Stream Core	6	Select from AMME1802: Engineering Mechanics

Year 2 - Semester 1

Type	CP	CP From
Commerce Core	6	Select from BUSS2000: Leading and Influencing in Business
Mechanical Stream Core	6	Select from AMME2000: Engineering Analysis
Mechanical Stream Core	6	Select from AMME2261: Fluid Mechanics 1
Mechanical Stream Core	6	Select from AMME2500: Engineering Dynamics

Year 2 - Semester 2

Type	CP	CP From
Mechanical Stream Core	6	Select from AMME2262: Introduction to Thermal Engineering
Mechanical Stream Core	6	Select from AMME2301: Mechanics of Solids
Commerce Core	6	Select from BUSS1030: Accounting, Business and Society
Engineering Core	0	Select from ENGP2000: Professional Engagement Program 2 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes
Mechanical Stream Core	6	Select from MECH2400: Mechanical Systems Design 1 Note: From 2024, MECH2400 is offered in Semester 1 only. Students who have not completed MECH2400 should discuss an enrolment plan with their Academic Advisor.

Year 3 - Semester 1

Type	CP	CP From
Commerce Units	12	Select from Unit Block: Commerce Units
Mechanical Stream Core	6	Select from MECH3362: Engineering Materials for Adv Manufacturing
Mechanical Stream Core	6	Select from AMME2700: Instrumentation Note: AMME2700 is discontinued. Students who have not yet completed this unit should take AMME1705 in its place.

Year 3 - Semester 2

Type	CP	CP From
Commerce Units	12	Select from Unit Block: Commerce Units
Mechanical Stream Core	6	Select from MECH3361: Mechanics of Solids 2
Mechanical Stream Core	6	Select from MECH3460: Mechanical Systems Design 2

Year 4 - Semester 1

Type	CP	CP From
Commerce Units	6	Select from Unit Block: Commerce Units
Mechanical Stream Core	6	Select from AMME3500: System Dynamics and Control
Mechanical Stream Core	6	Select from MECH3261: Fluid Mechanics 2
Mechanical Stream Core	6	Select from MECH3660: Manufacturing Engineering

Year 4 - Semester 2

Type	CP	CP From
Commerce Units	18	Select from Unit Block: Commerce Units
Mechanical Stream Core	6	Select from MECH3260: Thermal Engineering and Environment

Year 5 - Semester 1

Type	CP	CP From
Commerce Units	12	Select from Unit Block: Commerce Units
Mechanical Specialist Electives	6	Select from Unit Block: Mechanical Specialist Electives Note: Students have to complete a minimum of 12 CP of Mechanical Specialist Electives.
Engineering Core	6	Select from AMME4111: Thesis A
Engineering Core	0	Select from ENGP3000: Professional Engagement Program 3 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 5 - Semester 2

Type	CP	CP From
Commerce Units	12	Select from Unit Block: Commerce Units
Mechanical Specialist Electives	6	Select from Unit Block: Mechanical Specialist Electives Note: Students have to complete a minimum of 12 CP of Mechanical Specialist Electives.
Engineering Core	6	Select from AMME4112: Thesis B

4. Pathways

Major in Space Engineering

Type	CP	CP From
Mechanical Stream Core	6	Select from MECH1560: Introduction to Mechanical Engineering
Space Major Core	18	Select from AERO2705: Space Engineering 1 AERO3760: Space Engineering 2 AERO4701: Space Engineering 3
Engineering Core	12	Select from AMME4111: Thesis A AMME4112: Thesis B
Space Specialist Electives	12	Select from Unit Block Space Specialist Electives

Note: To be eligible for this major, students are required to meet progression requirements. There are ATAR or WAM entry requirements for this major.

This Engineering major can be taken along with any of the listed Commerce majors.

Students undertaking this major are not required to do Integrated Engineering units (ENGG1111, ENGG2111, ENGG3111, ENGG4111), and are exempt from AMME2000 and MECH3460.

5. Unit Blocks

Block 1 - Commerce Units (Max CP: 72)

Note: For the Bachelor of Commerce component, students are required to complete a total of 96 credit points of Commerce Table A units as listed in the handbook of the Business School, including 24 credit points of core units, a major or program from Table A and 12 credit points of OLEs. See Faculty handbooks at http://sydney.edu.au/handbooks

Block 2 - Space Major Core (Max CP: 18)

Unit Code	Unit Name	CP	Sessions Offered
AERO2705	Space Engineering 1	6	Semester 2
AERO3760	Space Engineering 2	6	Semester 2
AERO4701	Space Engineering 3	6	Semester 1

Note: These units are only available to students enrolled in the Space major. ATAR/WAM requirements apply.

Block 3 - Mechanical Specialist Electives (Min CP: 12,Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
AMME4401	Industrial and Product Design Engineering	6	Semester 2
AMME5060	Advanced Computational Engineering	6	Semester 2
AMME5101	Energy and the Environment	6	Semester 1
AMME5105	Risk Management Analysis	6	Semester 1
AMME5202	Computational Fluid Dynamics	6	Semester 1
AMME5271	Computational Nanotechnology	6	Semester 2
AMME5292	Applied Fluid Dynamics and Turbulence	6	Semester 1
AMME5310	Engineering Tribology	6	Semester 1
AMME5510	Vibration and Acoustics	6	Semester 2
AMME5520	Advanced Control and Optimisation	6	Semester 1
AMME5902	Computer Aided Manufacturing	6	Semester 2
AMME5912	Crash Analysis and Design	6	Semester 1
MECH2401	Human-Centred Engineering Design	6	Semester 2
MECH4460	Design of Micro- and Nanosystems	6	Semester 1
MECH5255	Air Conditioning and Refrigeration	6	Semester 2
MECH5265	Combustion	6	Semester 2
MECH5275	Renewable Energy	6	Semester 2
MECH5304	Materials Failure	6	Semester 2
MECH5305	Smart Materials	6	Semester 2
MECH5310	Advanced Engineering Materials	6	Semester 1

Block 4 - Space Specialist Electives (Min CP: 6,Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
AERO5700	Space Engineering (Advanced)	6	Semester 1 Semester 2
AMME5101	Energy and the Environment	6	Semester 1
AMME5202	Computational Fluid Dynamics	6	Semester 1
AMME5271	Computational Nanotechnology	6	Semester 2
AMME5310	Engineering Tribology	6	Semester 1
AMME5510	Vibration and Acoustics	6	Semester 2
AMME5520	Advanced Control and Optimisation	6	Semester 1
AMME5912	Crash Analysis and Design	6	Semester 1
MECH4460	Design of Micro- and Nanosystems	6	Semester 1
MECH5255	Air Conditioning and Refrigeration	6	Semester 2
MECH5265	Combustion	6	Semester 2
MECH5275	Renewable Energy	6	Semester 2
MECH5310	Advanced Engineering Materials	6	Semester 1

Block 5 - Engineering Core (Min CP: 24,Max CP: 24)

Unit Code	Unit Name	CP	Sessions Offered
AMME4010	Major Industrial Project	24	Semester 1 Semester 2
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
CHNG4203	Major Industrial Project	24	Semester 1 Semester 2
CHNG4811	Thesis A	6	Semester 1 Semester 2
CHNG4812	Thesis B	6	Semester 1 Semester 2
CIVL4022	Thesis A	6	Semester 1 Semester 2
CIVL4023	Thesis B	6	Semester 1 Semester 2
ELEC4712	Thesis A	6	Semester 1 Semester 2
ELEC4713	Thesis B	6	Semester 1 Semester 2
ELEC4714	Major Industrial Project	24	Semester 1 Semester 2
ENGP1000	Professional Engagement Program 1	0	Semester 1 Semester 2
ENGP2000	Professional Engagement Program 2	0	Semester 1 Semester 2
ENGP3000	Professional Engagement Program 3	0	Semester 1 Semester 2
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1004	Discrete Mathematics	3	Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1021	Calculus of One Variable	3	Semester 1 Semester 2
MATH1023	Multivariable Calculus and Modelling	3	Semester 1 Semester 2
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1905	Statistics (Advanced)	3	Semester 2
MATH1921	Calculus of One Variable (Adv)	3	Semester 1
MATH1923	Multivariable Calculus and Modelling (Adv)	3	Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 6 - Commerce Core (Min CP: 24,Max CP: 24)

Unit Code	Unit Name	CP	Sessions Offered
BUSS1000	Future of Business	6	Semester 1 Semester 2
BUSS1020	Quantitative Business Analysis	6	Semester 1 Semester 2
BUSS1030	Accounting, Business and Society	6	Semester 1 Semester 2
BUSS2000	Leading and Influencing in Business	6	Semester 1 Semester 2

Note: You must complete BUSS1000 in your first semester of enrolment.

Block 7 - Mechanical Stream Core (Min CP: 108,Max CP: 108)

Unit Code	Unit Name	CP	Sessions Offered
AMME1362	Introduction to Engineering Materials	6	Semester 2
AMME1802	Engineering Mechanics	6	Semester 2
AMME2000	Engineering Analysis	6	Semester 1
AMME2261	Fluid Mechanics 1	6	Semester 1
AMME2262	Introduction to Thermal Engineering	6	Semester 2
AMME2301	Mechanics of Solids	6	Semester 2
AMME2500	Engineering Dynamics	6	Semester 1
AMME2700	Instrumentation	6	Semester 1
AMME3500	System Dynamics and Control	6	Semester 1
ENGG1801	Engineering Computing	6	Semester 1 Int January
MECH1560	Introduction to Mechanical Engineering	6	Semester 1
MECH2400	Mechanical Systems Design 1	6	Semester 1
MECH3260	Thermal Engineering and Environment	6	Semester 2
MECH3261	Fluid Mechanics 2	6	Semester 1
MECH3361	Mechanics of Solids 2	6	Semester 2
MECH3362	Engineering Materials for Adv Manufacturing	6	Semester 1
MECH3460	Mechanical Systems Design 2	6	Semester 2
MECH3660	Manufacturing Engineering	6	Semester 1

Course:	Mechanical / Commerce (2020)
CP Required:	240
Min FT Duration:	5.00 Years
Min PT Duration:	5.00 Years
Faculty/School:	Faculty of Engineering
Years Offered:	2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

Faculty of Engineering

Mechanical / Commerce (2020)

1. Overview