Faculty of Engineering

Mechanical Engineering (mid-year) (2022)


Note: This course version applies only to students first enrolling in 2022.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Mechanical Engineering (mid-year) (2022)
CP Required: 192
Min FT Duration: 4.00 Years
Min PT Duration: 4.00 Years
Faculty/School: Faculty of Engineering
Years Offered: 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016

2. Requirements

Summary

In summary the requirements are:

Students must complete 192 credit points as follows:

► 6 credit points of Introductory Computing units table

► 12 credit points of Foundation Mathematics units table

► 30 credit points of Project table

► The Professional Engagement Program (PEP) comprising ENGP1001 (0cp), ENGP1002 (0cp), ENGP1003 (0cp), ENGP2001 (0cp), ENGP2002 (0cp), ENGP2003 (0cp), ENGP3001 (0cp) and ENGP3002 (0cp)

► 108 credit points of Mechanical Stream core units

► 30 credit points of Mechanical Stream electives

► Up to 6 credit points of Free electives (Engineering Electives, or a Table S elective)

The completion of a specialisation is not mandatory. If a student chooses to do a specialisation, it must be completed within the 192 credit points described above.

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 2

Type CP CP From
6 Select from AMME1802: Engineering Mechanics
3 Select from MATH1005: Statistical Thinking with Data
6 Select from AMME1362: Introduction to Engineering Materials
6 Select from MECH1400: Design and Construction of Mechanical Systems
0 Select from ENGP1001: Professional Engagement Program 1A


Note: All students must enrol in ENGP1001 in their first semester of enrolment.
3 Select from MATH1021: Calculus of One Variable

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 2 - Semester 1

Type CP CP From
6 Select from MECH1560: Introduction to Mechanical Engineering
3 Select from MATH1002: Linear Algebra
6 Select from Unit Block:
Free Electives
or other units.
6 Select from ENGG1810: Introduction to Engineering Computing
0 Select from ENGP1002: Professional Engagement Program 1B
3 Select from MATH1023: Multivariable Calculus and Modelling

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 2 - Semester 2

Type CP CP From
6 Select from AMME2301: Mechanics of Solids
6 Select from MECH2400: Mechanical Systems Design 1
6 Select from AMME2262: Introduction to Thermal Engineering
6 Select from Unit Block:
Mechanical Stream Elective Units
0 Select from ENGP1003: Professional Engagement Program 1C

Year 3 - Semester 1

Type CP CP From
6 Select from AMME2500: Engineering Dynamics
6 Select from AMME2000: Engineering Analysis
6 Select from AMME2261: Fluid Mechanics 1
0 Select from ENGP2001: Professional Engagement Program 2A
6 Select from AMME2700: Instrumentation


Note: AMME2700 is discontinued. Students who have not yet completed this unit should take AMME1705 in its place.

Year 3 - Semester 2

Type CP CP From
6 Select from MECH3260: Thermal Engineering and Environment
6 Select from MECH3361: Mechanics of Solids 2
6 Select from MECH3460: Mechanical Systems Design 2
6 Select from ENGG2112: Multi-disciplinary Engineering
0 Select from ENGP2002: Professional Engagement Program 2B

Year 4 - Semester 1

Type CP CP From
6 Select from AMME3500: System Dynamics and Control
6 Select from MECH3660: Manufacturing Engineering
6 Select from MECH3261: Fluid Mechanics 2
0 Select from ENGP2003: Professional Engagement Program 2C
6 Select from AMME4111: Thesis A

Year 4 - Semester 2

Type CP CP From
6 Select from Unit Block:
Mechanical Stream Elective Units
6 Select from AMME3060: Engineering Methods
6 Select from AMME4112: Thesis B
6 Select from ENGG3112: Interdisciplinary Engineering
0 Select from ENGP3001: Professional Engagement Program 3A

Year 5 - Semester 1

Type CP CP From
6 Select from Unit Block:
Mechanical Stream Elective Units
6 Select from Unit Block:
Mechanical Stream Elective Units
6 Select from Unit Block:
Mechanical Stream Elective Units
0 Select from ENGP3002: Professional Engagement Program 3B
6 Select from MECH3362: Engineering Materials for Adv Manufacturing

4. Pathways

Specialisation in Computational Engineering

Type CP CP From
6 Select from AMME5060: Advanced Computational Engineering
12 Select from AMME5202: Computational Fluid Dynamics
AMME5271: Computational Nanotechnology
AMME5912: Crash Analysis and Design

Specialisation in Energy and the Environment

Type CP CP From
6 Select from AMME5101: Energy and the Environment
12 Select from AMME5202: Computational Fluid Dynamics
AMME5292: Applied Fluid Dynamics and Turbulence
AMME5510: Vibration and Acoustics
MECH5255: Air Conditioning and Refrigeration
MECH5265: Combustion
MECH5275: Renewable Energy

Note: The requirements of the Energy and the Environment Specialisation have changed in 2024.

Students are required to complete 6cp of Specialisation Core units (AMME5101) and 12cp of Specialisation Elective units. MECH5275 has moved from Core to Elective units for the Specialisation.

This change is retrospectively applied for students commencing their degree from 2021 onwards.

Specialisation in Engineering Design

Type CP CP From
18 Select from AMME5902: Computer Aided Manufacturing
AMME5912: Crash Analysis and Design
MECH4460: Design of Micro- and Nanosystems
MECH5461: Design for Advanced Manufacturing

Specialisation in Engineering Management

Type CP CP From
18 Select from AMME5104: Applied Safety Systems and Risk Analysis
AMME5105: Risk Management Analysis
MECH4660: Engineering Management [not running in 2019]

Specialisation in Fluids Engineering

Type CP CP From
12 Select from AMME5202: Computational Fluid Dynamics
AMME5292: Applied Fluid Dynamics and Turbulence
12 Select from AMME5310: Engineering Tribology
MECH5255: Air Conditioning and Refrigeration
MECH5265: Combustion

Specialisation in Materials Science and Engineering

Type CP CP From
18 Select from AMME5271: Computational Nanotechnology
MECH5304: Materials Failure
MECH5305: Smart Materials
MECH5310: Advanced Engineering Materials
MECH5311: Microscopy and Microanalysis of Materials

5. Unit Blocks

Block 0 - Introductory Computing Units (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
ENGG1810 Introduction to Engineering Computing 6 Semester 1
Semester 2
Int February
INFO1110 Introduction to Programming 6 Semester 1
Semester 2
INFO1910 Introduction to Programming (Advanced) 6 Semester 1
Semester 2

Note: Students must complete:

-6cp from ENGG1810 or (INFO1110 or INFO1910). For Mechanical stream students it is recommended that ENGG1810 is taken.

Block 1 - Foundation Mathematics Units (Min CP: 12,Max CP: 12)

Unit Code Unit Name CP Sessions Offered
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 12cp including:

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

Block 2 - Projects Table (Min CP: 30,Max CP: 30)

Unit Code Unit Name CP Sessions Offered
AERO1560 Introduction to Aerospace Engineering 6 Semester 1
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
BMET1960 Biomedical Engineering 1A 6 Semester 1
CHNG1108 Introduction to Chemical Engineering 6 Semester 1
CIVL1900 Introduction to Civil Engineering 6 Semester 1
ELEC1004 Practical Introduction to Electrical Engineering 6 Semester 1
ENGG2112 Multi-disciplinary Engineering 6 Semester 1
Semester 2
ENGG3112 Interdisciplinary Engineering 6 Semester 1
Semester 2
MECH1560 Introduction to Mechanical Engineering 6 Semester 1
MTRX1701 Introduction to Mechatronic Engineering 6 Semester 1

Note: - Students are to select the introduction unit relevant to their stream. Students in both Electrical and Software Engineering streams are to take ELEC1004.

- Students enrolled in the Dalyell Stream may count any Dalyell unit in place of ENGG2112 and may count any Engineering Dalyell unit in place of ENGG3112

- Students are to select the thesis units relevant to their stream. Aeronautical, Mechanical and Mechatronic students are to enrol in the AMME coded units. Students in both Electrical and Software are to enrol in the ELEC coded units.

Block 3 - Professional Engagement Program (PEP) Units

Unit Code Unit Name CP Sessions Offered
ENGP1001 Professional Engagement Program 1A 0 Semester 1
Semester 2
ENGP1002 Professional Engagement Program 1B 0 Semester 1
Semester 2
ENGP1003 Professional Engagement Program 1C 0 Semester 1
Semester 2
ENGP2001 Professional Engagement Program 2A 0 Semester 1
Semester 2
ENGP2002 Professional Engagement Program 2B 0 Semester 1
Semester 2
ENGP2003 Professional Engagement Program 2C 0 Semester 1
Semester 2
ENGP3001 Professional Engagement Program 3A 0 Semester 1
Semester 2
ENGP3002 Professional Engagement Program 3B 0 Semester 1
Semester 2

Note: -Candidates for the Bachelor of Engineering Honours must complete the Professional Engagement Program units of study.

- Candidates must enrol in ENGP1001 in their first semester of study

Block 4 - Mechanical Stream Core (Min CP: 108,Max CP: 108)

Unit Code Unit Name CP Sessions Offered
AMME1362 Introduction to Engineering Materials 6 Semester 2
AMME1802 Engineering Mechanics 6 Semester 2
AMME2000 Engineering Analysis 6 Semester 1
AMME2261 Fluid Mechanics 1 6 Semester 1
AMME2262 Introduction to Thermal Engineering 6 Semester 2
AMME2301 Mechanics of Solids 6 Semester 2
AMME2500 Engineering Dynamics 6 Semester 1
AMME2700 Instrumentation 6 Semester 1
AMME3060 Engineering Methods 6 Semester 2
AMME3500 System Dynamics and Control 6 Semester 1
MECH1400 Design and Construction of Mechanical Systems 6 Semester 2
MECH2400 Mechanical Systems Design 1 6 Semester 1
MECH3260 Thermal Engineering and Environment 6 Semester 2
MECH3261 Fluid Mechanics 2 6 Semester 1
MECH3361 Mechanics of Solids 2 6 Semester 2
MECH3362 Engineering Materials for Adv Manufacturing 6 Semester 1
MECH3460 Mechanical Systems Design 2 6 Semester 2
MECH3660 Manufacturing Engineering 6 Semester 1

Block 5 - Mechanical Stream Elective Units (Min CP: 30,Max CP: 30)

Unit Code Unit Name CP Sessions Offered
AERO5750 Unmanned Air Vehicle Systems 6 Semester 1
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4401 Industrial and Product Design Engineering 6 Semester 2
AMME5060 Advanced Computational Engineering 6 Semester 2
AMME5101 Energy and the Environment 6 Semester 1
AMME5104 Applied Safety Systems and Risk Analysis 6 Semester 1
AMME5105 Risk Management Analysis 6 Semester 1
AMME5202 Computational Fluid Dynamics 6 Semester 1
AMME5271 Computational Nanotechnology 6 Semester 2
AMME5292 Applied Fluid Dynamics and Turbulence 6 Semester 1
AMME5310 Engineering Tribology 6 Semester 1
AMME5510 Vibration and Acoustics 6 Semester 2
AMME5520 Advanced Control and Optimisation 6 Semester 1
AMME5902 Computer Aided Manufacturing 6 Semester 2
AMME5912 Crash Analysis and Design 6 Semester 1
MECH2401 Human-Centred Engineering Design 6 Semester 2
MECH4460 Design of Micro- and Nanosystems 6 Semester 1
MECH4660 Engineering Management [not running in 2019] 6 Semester 1
MECH5255 Air Conditioning and Refrigeration 6 Semester 2
MECH5265 Combustion 6 Semester 2
MECH5275 Renewable Energy 6 Semester 2
MECH5304 Materials Failure 6 Semester 2
MECH5305 Smart Materials 6 Semester 2
MECH5310 Advanced Engineering Materials 6 Semester 1
MECH5311 Microscopy and Microanalysis of Materials 6 Semester 1
MECH5461 Design for Advanced Manufacturing 6 Semester 1

Block 6 - Free Electives (Max CP: 6)

Note: Students may take 6 credit points of free electives to complete the total number of credit points for their degree. Students may take the following units of study as free electives, provided they satisfy any prerequisite, quota, departmental permission or any other requirements of the units, and the units are not essentially the same or prohibited units for any of the other units in their degree.

(1) Any units of study from the Faculty of Engineering available to undergraduate students

(2) Any unit of study from Table S available to undergraduate students