|
University Archive |
|
|
University Archive |
| Course: | Flexible First Year (Stream A) / Science (2012) |
| CP Required: | 48 |
| Min FT Duration: | 1.00 Years |
| Min PT Duration: | N/A |
| Faculty/School: | University Archive |
| Years Offered: | 2014, 2013, 2012 |
| Type | CP | CP From |
Core
|
6 |
ENGG1800: Introduction to Engineering A |
Core
|
3 |
MATH1001: Differential Calculus |
Core
|
3 |
MATH1002: Linear Algebra |
| 6 |
Select from
Unit Block: First year Engineering Options |
|
| 6 |
Select from
Unit Block: Selected Junior Science Units Note: Science/Engineering combined degrees require 240 credit points, comprising 96 credit points from Science subject areas, with a major in one Science discipline, plus units prescribed for the Engineering specialisation. Science units forming part of core requirements in the Civil Engineering specialisation may be counted as part of the 96 credit point Science requirement. Consult resolutions for Combined Engineering /Science degree in Faculty handbooks for further details. |
Note:
Students wishing to enrol in more advanced alternatives to MATH1001 and MATH1002 should check with the Faculty of Science before doing so.
At the completeion of 1st semester or 1st year students must choose a stream of Engineering for which they are eligible and transfer to this stream in order to complete their degree.
| Type | CP | CP From |
Core
|
6 |
ENGG1803: Professional Engineering 1 |
Core
|
3 |
MATH1003: Integral Calculus and Modelling |
Core
|
3 |
MATH1005: Statistical Thinking with Data |
| 6 |
Select from
Unit Block: First year Engineering Options |
|
| 6 |
Select from
Unit Block: Selected Junior Science Units |
Note:
Students wishing to enrol in more advanced alternatives to MATH1003 and MATH1005 should check with the Faculty of Science before doing so.
At the completeion of 1st semester or 1st year students must choose a stream of Engineering for which they are eligible and transfer to this stream in order to complete their degree.
| Type | CP | CP From |
Core
|
6 |
CIVL4022: Thesis A |
Core
|
6 |
CIVL4023: Thesis B |
Note: Students with ISWAM of 65% or greater are eligible for Honours pathway and can replace Engineering Project units CIVL4024 and COVL4025 with Honours Thesis units CIVL4022 and CIVL4023.
| Type | CP | CP From |
Core
|
6 |
CIVL3805: Project Scope, Time and Cost Management |
| 12 |
Select from
CIVL3813: Contracts Formulation and Management CIVL4814: Project Procurement and Tendering CIVL4815: Project Formulation Note: Students may not take more than three of these. |
Note: To meet specialisation requirements students must enrol in at least 3 electives from the relevant stream and undertake an Honours Thesis or Engineering Project in a related topic. Students may enrol in a maximum of 4 electives from the Constructions Engineering and Management stream.
| Type | CP | CP From |
Core
|
6 |
CIVL3614: Hydrology |
| 12 |
Select from
CIVL5351: Geoenvironmental Engineering CIVL5668: Fundamentals of Wind Engineering for Design CIVL5670: Reservoir, Stream and Coastal Engineering |
Note: To meet specialisation requirements students must enrol in at least 3 electives from the relevant stream and undertake an Honours Thesis or Engineering Project in a related topic.
| Type | CP | CP From |
Core
|
6 |
CIVL3411: Geotechnical Engineering 1 |
| 12 |
Select from
CIVL5351: Geoenvironmental Engineering CIVL5452: Geotechnical Engineering 2 CIVL5458: Numerical Methods in Civil Engineering |
Note: To meet specialisation requirements students must enrol in at least 3 electives from the relevant stream and undertake an Honours Thesis or Engineering Project in a related topic.
| Type | CP | CP From |
Core
|
6 |
CIVL3235: Structural Analysis |
| 12 |
Select from
CIVL5266: Steel Structures - Stability CIVL5269: Advanced Concrete Structures CIVL5458: Numerical Methods in Civil Engineering |
Note: To meet specialisation requirements students must enrol in at least 3 electives from the relevant stream and undertake an Honours Thesis or Engineering Project in a related topic.
| Unit Code | Unit Name | CP | Sessions Offered |
| CIVL3235 | Structural Analysis | 6 |
Semester 2 |
| CIVL3411 | Geotechnical Engineering 1 | 6 |
Semester 2 |
| CIVL3614 | Hydrology | 6 |
Semester 2 |
| CIVL3805 | Project Scope, Time and Cost Management | 6 |
Semester 1 |
| CIVL3813 | Contracts Formulation and Management | 6 |
Semester 2 |
| CIVL4814 | Project Procurement and Tendering | 6 |
Semester 2 |
| CIVL4815 | Project Formulation | 6 |
Semester 1 |
| CIVL5266 | Steel Structures - Stability | 6 |
Semester 1 |
| CIVL5269 | Advanced Concrete Structures | 6 |
Semester 2 |
| CIVL5351 | Geoenvironmental Engineering | 6 |
Semester 2 |
| CIVL5452 | Geotechnical Engineering 2 | 6 |
Semester 1 |
| CIVL5458 | Numerical Methods in Civil Engineering | 6 |
Semester 1 |
| CIVL5665 | Water Supply for Towns and Cities | 6 |
Semester 2 |
| CIVL5668 | Fundamentals of Wind Engineering for Design | 6 |
Semester 1 |
| CIVL5670 | Reservoir, Stream and Coastal Engineering | 6 |
Semester 1 |
Note: Junior, Intermediate and Senior Science units should be selected so as to ensure that 72 credit points of Science units, including one major, are completed in addition to the units completed as part of the engineering core. Every major requires at least 24 credit points of senior units plus varying amounts of intermediate and junior credit points as prerequisites for the senior units. Please see Science Faculty 2011 handbook for details of specific majors.
Note: Junior, Intermediate and Senior Science units should be selected so as to ensure that 72 credit points of Science units, including one major, are completed in addition to the units completed as part of the engineering core. Every major requires at least 24 credit points of senior units plus varying amounts of intermediate and junior credit points as prerequisites for the senior units. Please see Science Faculty 2011 handbook for details of specific majors.
Note: Junior, Intermediate and Senior Science units should be selected so as to ensure that 72 credit points of Science units, including one major, are completed in addition to the units completed as part of the engineering core. Every major requires at least 24 credit points of senior units plus varying amounts of intermediate and junior credit points as prerequisites for the senior units. Please see Science Faculty 2011 handbook for details of specific majors.
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME1550 | Dynamics 1 | 6 |
Semester 2 |
| BIOL1001 | Concepts in Biology | 6 |
Semester 1 |
| CHEM1101 | Chemistry 1A | 6 |
Semester 1 Semester 2 Summer Main |
| CHEM1102 | Chemistry 1B | 6 |
Semester 1 Semester 2 Summer Main |
| ENGG1802 | Engineering Mechanics | 6 |
Semester 2 Summer Main Int January |
| PHYS1001 | Physics 1 (Regular) | 6 |
Semester 1 |
Note: Choice of core unit will depend which stream of Engineering that students are considering.