Note: This course version is currently under review and is subject to change.

ProgramsEngENGI (UG)BEHons CombinedBE/BComBE/BCom to 2022Chemical & Biomolecular / Commerce (2020)


Show information forcommencing students (ie. started First Year then).
 
ASK ABOUT THIS COURSE


Print View | Download as PDF Administrative Information (Fees, ATAR etc.)

Select plan for Major/Pathway

Year 1 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6CHEM1111: Chemistry 1A
6BUSS1000: Future of Business


Note:  You must complete BUSS1000 in your first semester of enrolment
3MATH1021: Calculus of One Variable
3MATH1002: Linear Algebra
6ENGG1801: Engineering Computing


Note:  ENGG1810 Introduction to Engineering Computing replaces ENGG1801 from 2021.
0ENGP1000: Professional Engagement Program 1


Note:  All students must enrol in ENGP1000 in their first semester of enrolment.

New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note:   From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 1 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6CHEM1112: Chemistry 1B
3MATH1023: Multivariable Calculus and Modelling
6CHNG1103: Conservation of Mass and Energy
6BUSS1020: Quantitative Business Analysis
3MATH1004: Discrete Mathematics


Note:  Students in BE(Hons)/BCom take BUSS1020 in place of BE(Hons) core unit MATH1005. In the spare 3 cp slot, students are advised to take MATH1004.

Note:   From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 2 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6CHNG2803: Heat and Mass Transfer
6CHNG2802: Chemical Engineering Modelling and Analysis
6CHNG2801: Fluid Mechanics
6ENGG1111: Integrated Engineering 1

Year 2 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6CHNG2804: Chemical Engineering Thermodynamics
6CHNG2806: Separation Processes
6BUSS1030: Accounting, Business and Society
2ENGG2111: Integrated Engineering 2


Note:  Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111.
0ENGP2000: Professional Engagement Program 2


Note:  New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes
6CHNG2805: Engineering for a Sustainable Society


Note:  CHNG1106 replaces CHNG2805 from 2021.

Note:   Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111. Students may take this unit in the final semester or may swap with an elective to take it earlier.

https://canvas.sydney.edu.au/courses/2806/pages/feit-changes-to-the-bachelor-of-engineering-honours-degree-how-they-affect-you

Year 3 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6CHNG3803: Reaction Engineering
6CHNG3802: Process Dynamics and Control
6BUSS2000: Leading and Influencing in Business
6CHNG3805: Particle Processing

Year 3 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6Commerce Units
6CHNG3806: Risk Management for Chemical Engineering
6CHNG3804: Biochemical Engineering
6CHNG3801: Process Plant Design

Year 4 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
18Select from
Commerce Units
6CHNG4811: Thesis A
2ENGG3111: Integrated Engineering 3


Note:  Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111.

Note:   1. Combined degree students may choose to take Chemical Engineering Design A & B in the same year as Engineering Project/Honours Thesis, or separately across years 4 and 5 as preferred.

2. Top students may apply to undertake industry-based projects under the Major Industry Placement Scheme. MIPPS students take a single 24 credit points unit (CHNG4203) in place of Honours Thesis Units plus Chemical Engineering Design A and the 6 credit point Recommended Chemical and Biomolecular Electives. See Streams/Majors tab for more details of MIPPS. 12 credit points (two units) from the `Depth` units of study should also be taken in either first or second semester.

Year 4 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
18Select from
Commerce Units
6CHNG4812: Thesis B

Year 5 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
12Select from
Commerce Units
6CHNG4802: Chemical Engineering Design A
2ENGG4111: Integrated Engineering 4


Note:  Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111. ENGG3112 can be taken in this semester, or earlier by switching an elective.
0ENGP3000: Professional Engagement Program 3


Note:  New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 5 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
18Select from
Commerce Units
6CHNG4806: Chemical Engineering Design B

Alternate Thesis Pathway : Major Industrial Project Placement Scheme (MIPPS)

Type CP CP From
Core
24 CHNG4203: Major Industrial Project
View complete Program Structure

Note: MIPPS students take CHNG4203 Major Industrial Project Placement (24 credit points). This unit replaces regular Honours Thesis units (CHNG4811 and CHNG4812) along with CHNG4001 Practical Experience, CHNG4112 Foundation of Chemical Engineering Design A and 6 credit points of electives. Students are admitted to MIPPS by school permission only. Applications are taken in third year of study.

Block 1 - Engineering Core (Min CP: 33,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
CHNG4203 Major Industrial Project 24 Semester 1
Semester 2
CHNG4811 Thesis A 6 Semester 1
Semester 2
CHNG4812 Thesis B 6 Semester 1
Semester 2
CIVL4022 Thesis A 6 Semester 1
Semester 2
CIVL4023 Thesis B 6 Semester 1
Semester 2
ELEC4712 Thesis A 6 Semester 1
Semester 2
ELEC4713 Thesis B 6 Semester 1
Semester 2
ELEC4714 Major Industrial Project 24 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4111 Integrated Engineering 4 2 Semester 1
ENGP1000 Professional Engagement Program 1 0 Semester 1
Semester 2
ENGP2000 Professional Engagement Program 2 0 Semester 1
Semester 2
ENGP3000 Professional Engagement Program 3 0 Semester 1
Semester 2
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1004 Discrete Mathematics 3 Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- 9 cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp)

- Students in the BE(Hons)/BCom take BUSS1020 (6cp) in place of MATH1005 (3cp). MATH1004 should be taken in the spare 3 cp slot.

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 2 - CBE Core (Min CP: 108,Max CP: 108)

Unit Code Unit Name CP Sessions Offered
CHEM1111 Chemistry 1A 6 Semester 1
Semester 2
Int January
CHEM1112 Chemistry 1B 6 Semester 1
Semester 2
Int January
CHEM1911 Chemistry 1A (Adv) 6 Semester 1
CHEM1912 Chemistry 1B (Adv) 6 Semester 2
CHNG1103 Conservation of Mass and Energy 6 Semester 2
CHNG2801 Fluid Mechanics 6 Semester 1
CHNG2802 Chemical Engineering Modelling and Analysis 6 Semester 1
CHNG2803 Heat and Mass Transfer 6 Semester 1
CHNG2804 Chemical Engineering Thermodynamics 6 Semester 2
CHNG2805 Engineering for a Sustainable Society 6 Semester 2
CHNG2806 Separation Processes 6 Semester 2
CHNG3801 Process Plant Design 6 Semester 2
CHNG3802 Process Dynamics and Control 6 Semester 1
CHNG3803 Reaction Engineering 6 Semester 1
CHNG3804 Biochemical Engineering 6 Semester 2
CHNG3805 Particle Processing 6 Semester 1
CHNG3806 Risk Management for Chemical Engineering 6 Semester 2
CHNG4802 Chemical Engineering Design A 6 Semester 1
CHNG4806 Chemical Engineering Design B 6 Semester 2
ENGG1801 Engineering Computing 6 Semester 1
Int January

Block 3 - Commerce Core (Min CP: 24,Max CP: 24)

Unit Code Unit Name CP Sessions Offered
BUSS1000 Future of Business 6 Semester 1
Semester 2
BUSS1020 Quantitative Business Analysis 6 Semester 1
Semester 2
BUSS1030 Accounting, Business and Society 6 Semester 1
Semester 2
BUSS2000 Leading and Influencing in Business 6 Semester 1
Semester 2

Note: You must complete BUSS1000 in your first semester of enrolment.

Block 6 - Commerce Units (Max CP: 72)

Note: For the Bachelor of Commerce component, students are required to complete a total of 96 credit points of Commerce Table A units as listed in the handbook of the Business School, including 24 credit points of core units, a major or program from Table A and 12 credit points of OLEs. See Faculty handbooks at http://sydney.edu.au/handbooks

Course: Chemical & Biomolecular / Commerce (2020)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: N/A
Faculty/School: Faculty of Engineering
Years Offered: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015
Requirements: Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of Chemical stream core units

Commerce (96 credit points):

► 24 credit points of Commerce core units

► A major (48 credit points) from Table A of the Faculty of Commerce

► 12 credit points of OLE

► 12 credit points of elective units from Table A or Table S

The handbook rules governing this degree are as follows:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

To qualify for the award of the combined degree:

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Commerce

For the Bachelor of Commerce component of a combined degree:

(a) The units of study that may be taken are set out in Table A of The University of Sydney Business School.

(b) Candidates must complete 96 credit points of units of study selected from the Table of Undergraduate Units of Study from The University of Sydney Business School including:

(i) any required degree core units as set out in Table A of the University of Sydney Business School; and

(ii) a major (48 credit points) or a 3-year program with an embedded major (except for the Professional Accounting Program) from Table A of the University of Sydney Business School; and

(iii) 12 credit points of units of study in the Open Learning Environment as listed in Table O; and

(iv) where appropriate, additional electives from Table A of the University of Sydney Business School or Table S;

(v) If enrolled in a stream, complete the requirements for the stream as specified in Table A of the University of Sydney Business School.

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/
Report Type: