Note: This course version is currently under review and is subject to change.
ProgramsEngENGI (PG)MPE/MPEAMPE(Accel)MPE(Accel) to 2024Master of Professional Engineering (Accelerated) (Structural) (2021)
Show information forcommencing students (ie. started First Year then).
The course requirements described here apply to persons who commenced their candidature after 1 January, 2021 and persons who commenced their candidature prior to 1 January, 2021 who elect to proceed under 2021 resolutions.
Candidates who commenced prior to 1 January, 2021 may complete the requirements in accordance with the resolutions in force at the time of their commencement, provided that requirements are completed by 1 January, 2026, or later date as the faculty may, in special circumstances, approve.
Candidates who first commenced in 2021, and are re-enrolling for 2022 or later, should be aware that there may have been changes in units of study offered since, Check that units are still available by clicking the unit of study link in the course table. See 2024 version of this course for up to date unit of study list.
For details of relevant resolutions see faculty handbook at sydney.edu.au/handbooks.
Print View | Download as PDF Administrative Information (Fees, ATAR etc.)
Year 1 - Semester 1
SITS Diet Block/Type | CP | Unit of Study/Unit Block |
Core | 6 | ENGG5204: Engineering Professional Practice |
Core | 6 | ENGG5205: Professional Practice in Project Management Note: From 2023, this unit is replaced by PMGT5205 Professional Project Practice |
Core | 6 | CIVL9205: Concrete Structures 1 |
Core | 6 | CIVL9612: Fluid Mechanics |
Year 1 - Semester 2
SITS Diet Block/Type | CP | Unit of Study/Unit Block |
Core | 6 | CIVL6268: Structural Dynamics |
Core | 6 | CIVL8811: Engineering Design and Construction |
Core | 6 | CIVL9206: Steel Structures 1 |
6 | Elective Units of Study |
Year 2 - Semester 1
SITS Diet Block/Type | CP | Unit of Study/Unit Block |
Core | 6 | CIVL5020: Capstone Project A Note: See Majors/Pathways tab for full details. Students achieving an average mark of 75% or higher are eligible for the Research Pathway and may replace CIVL5020 and 6cp of recommended electives with CIVL5222 Dissertation A. |
Core | 0 | ENGG5217: Practical Experience |
Core | 6 | CIVL6257: Concrete Structures - Prestressed Concrete |
Core | 6 | CIVL6267: Steel Structures - Advanced Analysis and Design |
Core | 6 | CIVL9903: Civil Engineering Design |
Year 2 - Semester 2
SITS Diet Block/Type | CP | Unit of Study/Unit Block |
Core | 6 | CIVL5021: Capstone Project B Note: See Majors/Pathways tab for full details. Students achieving an average mark of 75% or higher are eligible for the Research Pathway and may replace CIVL5021 and 6cp of recommended electives with CIVL5223 Dissertation B. |
Core | 6 | CIVL6264: Composite Steel-Concrete Structures |
12 | Select from Specialist Elective Units |
Capstone Project
Type | CP | CP From |
Core
|
6 |
CIVL5020: Capstone Project A |
Core
|
6 |
CIVL5021: Capstone Project B |
View complete Program Structure |
Note: Capstone Project must be completed by all students, unless undertaking Research Pathway (conditions below). Capstone Project is normally completed across two semesters in two stages through CIVL5020 (6cp) and CIVL5021 (6cp). However, it may also be completed in a single semester (12 cp).
Extended Capstone Project
Type | CP | CP From |
Core
|
6 |
CIVL5020: Capstone Project A |
Core
|
12 |
CIVL5022: Capstone Project B Extended |
View complete Program Structure |
Note:
Students take Capstone Project units CIVL5020 and CIVL5022 (total 18 cp) in place of Capstone Project CIVL5021 and 6 cp of elective units.
Students achieving an average mark of 70% or higher are eligible for the Extended Capstone Project.
Major Industrial Project
Type | CP | CP From |
Core
|
24 |
CIVL5010: Major Industry Project |
View complete Program Structure |
Note: Candidates take CIVL5010 in place of ENGG5217 Practical Experience, CIVL5020/CIVL5021 Capstone Project A & B and 12 credit points of Elective units of study.
Research Pathway
Type | CP | CP From |
Core
|
12 |
CIVL5222: Dissertation A |
Core
|
12 |
CIVL5223: Dissertation B |
View complete Program Structure |
Note:
Research pathway students take Dissertation units Research pathway students take Dissertation units CIVL5222 and CIVL5223 (total 24 cp) in place of Capstone Project units and 12 cp of elective units.
Students achieving an average mark of 75% or higher are eligible for the Research Pathway.
Block 1 - Specialist Elective Units (Min CP: 12,Max CP: 12)
Unit Code | Unit Name | CP | Sessions Offered |
CIVL5266 | Steel Structures - Stability | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5269 | Advanced Concrete Structures | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5277 | Structural Rehabilitation and Timber Design | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5458 | Numerical Methods in Civil Engineering | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
Block 2 - Elective Units of Study (Min CP: 6,Max CP: 6)
Unit Code | Unit Name | CP | Sessions Offered |
CIVL5276 | Bridge Engineering | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5320 | Engineering for Sustainable Development | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5351 | Geoenvironmental Engineering | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5452 | Geotechnical Engineering 2 | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5453 | Geotechnical Hazards | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5460 | Soil Mechanics 2 | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5668 | Fundamentals of Wind Engineering for Design | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5670 | Reservoir, Stream and Coastal Engineering | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5701 | Transport Networks | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5702 | Traffic Engineering | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5703 | Transport Policy, Planning and Deployment | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5704 | Transport Analytics | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL5999 | Advanced Research and Analysis | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CIVL9235 | Structural Analysis | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CSYS5010 | Introduction to Complex Systems | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
CSYS5020 | Interdependent Civil Systems | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
ENGG5203 | Quality Engineering and Management | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
Block 3 - Exchange Units (Max CP: 12)
Unit Code | Unit Name | CP | Sessions Offered |
ENGG5231 | Engineering Graduate Exchange A | 6 |
Int January
101 - Int January
Int July
107 - Int July
|
ENGG5232 | Engineering Graduate Exchange B | 6 |
Int January
101 - Int January
Int July
107 - Int July
|
Note: Summer/Winter Exchange units require the approval of the Program Director. With approval, up to 12 credit points of Exchange units may taken in place of other units, towards the requirements of the degree.
Course: | Master of Professional Engineering (Accelerated) (Structural) (2021) |
CP Required: | 96 |
Min FT Duration: | 2.00 Years |
Min PT Duration: | N/A |
Faculty/School: | Faculty of Engineering |
Years Offered: | 2024, 2023, 2022, 2021, 2020, 2019 |
Requirements: | To qualify for the award of the Master of Professional Engineering in this specialisation, a candidate must complete 96 credit points, including: (a) 66 credit points of Core units (b) ENGG5217 Practical Experience (c) 12 credit points of Specialist Elective units (d) 6 credit points of Elective units (e) A minimum of 12 credit points of Project or Research Pathway units (f) Candidates undertaking the Research Pathway, replace 12 credit points of electives with Research Pathway units Admission to candidature Admission to candidature requires: EITHER (a) a Bachelor of Engineering from the University of Sydney, OR (b) equivalent qualification, with a minimum credit average; OR (c) a non-engineering bachelor's degree with a minimum credit average, with studies equivalent to 48 credit points in mathematics, physics, chemistry, biology, geology, computing or statistics, as related to the intended engineering specialisation. All candidates for admission must have prior learning equivalent to 48 credit points in total, which, in the estimation of the Dean, is comparable to the requirements for the first year of a Bachelor of Engineering at this University in the stream sought for admission. Credit for previous study Candidates with a Bachelor of Engineering or equivalent in the relevant discipline, and who have reached an acceptable level of academic achievement in their prior degree, may be eligible for a reduction of volume in learning of up to 48 credit points. A maximum of 72 credit points may be granted towards the Master of Professional Engineering from external postgraduate studies where no award has been, or will be made, provided the studies are acceptable to the Program Director Dean and are equivalent to units of study offered in the Master of Professional Engineering. Candidates transferring from the Master of Engineering to the Master of Professional Engineering may transfer up to 24 credit points provided units are equivalent to units of study offered in the Master of Professional Engineering. Any additional credit is subject to the approval by the Dean. Progression Candidates are required to meet the progression requirements as specified in the University's Coursework Rule. Course resolutions This course is administered under course resolutions published in the Faculty Handbook at http://sydney.edu.au/handbooks/ |