Note: This course version is currently under review and is subject to change.
ProgramsEngENGI (PG)MPE/MPEAMPE(Accel)MPE(Accel) to 2024Master of Professional Engineering (Accelerated) (Biomedical) (2021)
Show information forcommencing students (ie. started First Year then).
The course requirements described here apply to persons who commenced their candidature after 1 January, 2021 and persons who commenced their candidature prior to 1 January, 2021 who elect to proceed under 2021 resolutions.
Candidates who commenced prior to 1 January, 2021 may complete the requirements in accordance with the resolutions in force at the time of their commencement, provided that requirements are completed by 1 January, 2026, or later date as the faculty may, in special circumstances, approve.
Candidates who first commenced in 2021, and are re-enrolling for 2022 or later, should be aware that there may have been changes in units of study offered since, Check that units are still available by clicking the unit of study link in the course table. See 2024 version of this course for up to date unit of study list.
For details of relevant resolutions see faculty handbook at sydney.edu.au/handbooks.
Print View | Download as PDF Administrative Information (Fees, ATAR etc.)
Select plan for Major/Pathway
Year 1 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
Core | 6 | BMET9660: Biomanufacturing |
Core | 6 | BMET9921: Biomedical Engineering Technology |
Core | 6 | BMET9990: Biomedical Product Development |
| 6 | Biomedical Electives |
Year 1 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
Core | 6 | BMET5992: Regulatory Affairs in the Medical Industry |
Core | 6 | BMET9961: Biomaterials |
| 12 | Select from Biomedical Electives |
Year 2 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
Core | 6 | BMET5020: Capstone Project A Note: Students achieving an average mark of 75% or higher are eligible for the Research pathway and may replace BMET5020 and 6cp of electives with BMET5222 Dissertation A. |
Core | 0 | ENGG5217: Practical Experience |
Core | 6 | BMET9971: Tissue Engineering |
| 12 | Select from Biomedical Electives |
Note: Candidates undertaking the Major Industrial Project take BMET5010 in place of ENGG5217 Practical Experience, BMET5020/5021 Capstone Project A & B and 12 credit points of Specialist Elective units of study.
Year 2 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
Core | 6 | BMET5021: Capstone Project B Note: Students achieving an average mark of 75% or higher are eligible for the Research pathway and may replace BMET5021 and 6cp of electives with BMET5223 Dissertation B. |
| 18 | Select from Biomedical Electives |
Note: Candidates undertaking the Major Industrial Project take BMET5010 in place of ENGG5217 Practical Experience, BMET5020/5021 Capstone Project A & B and 12 credit points of Specialist Elective units of study.
Extended Capstone Project
| Type | CP | CP From |
Core
|
12 |
BMET5022: Capstone Project B Extended Note: Students achieving an average mark of 70% or higher over 48 credit points of units of study are eligible for the Extended Capstone Project. BMET5022 replaces BMET5021 and a 6cp elective unit. |
| View complete Program Structure | ||
Note: Students take Capstone Project units BMET5020 and BMET5022 (total 18 cp) in place of Capstone Project BMET5020/BMET5021 and 6 cp of elective units.
MIPP Pathway (Major Industrial Project Placement)
| Type | CP | CP From |
Core
|
24 |
BMET5010: Major Industrial Project |
| View complete Program Structure | ||
Note: Candidates undertaking the Major Industrial Project take BMET5010 in place of ENGG5217 Practical Experience, BMET5020/5021 Capstone Project A & B and 12 credit points of Specialist Elective units of study.
Research Pathway
| Type | CP | CP From |
Core
|
12 |
BMET5222: Dissertation A Note: Students achieving an average mark of 75% or higher are eligible for the Research Pathway. BMET5222 replaces BMET5020 and a 6cp elective unit. |
Core
|
12 |
BMET5223: Dissertation B Note: Students achieving an average mark of 75% or higher are eligible for the Research Pathway. BMET5223 replaces BMET5021 and a 6cp elective unit. |
| View complete Program Structure | ||
Note: Research pathway students take Dissertation units BMET5222 and BMET5223 (total 24 cp) in place of Capstone Project units and 12 cp of elective units.
Student Industrial Placement Scheme Pathway
| Type | CP | CP From |
Core
|
24 |
BMET5010: Major Industrial Project Note: Candidates undertaking the Major Industrial Project take BMET5010 in place of ENGG5217 Practical Experience, BMET5020/5021 Capstone Project A & B and 12 credit points of Specialist Elective units of study. |
| View complete Program Structure | ||
Block 1 - Biomedical Electives (Min CP: 48,Max CP: 48)
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME5271 | Computational Nanotechnology | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| AMME9301 | Mechanics of Solids 1 | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| AMME9500 | Engineering Dynamics | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET5790 | Introduction to Biomechatronics | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET5907 | Orthopaedic and Surgical Engineering | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET5911 | Instrumentation for Nanotechnology | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET5931 | Nanomaterials in Medicine | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET5933 | Biomedical Image Analysis | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET5934 | Biomedical Machine Learning | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET5935 | Biomedical Application in Genetic Technology | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET5944 | Nanofabrication and Bioinspired Materials | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET5953 | Rehabilitation Engineering | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET5957 | Neural Engineering | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET5958 | Nanoscale Biomedical Diagnostics | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET5959 | Introduction to Biophotonics | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET5962 | Introduction to Mechanobiology | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET5963 | Microfluidics in Healthcare | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET5964 | Advanced Cellular Biomechanics | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET5995 | Advanced Bionics | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET5996 | Biomedical Technology Software | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET9400 | Biomechanical Design | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET9802 | Biomedical Instrumentation | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET9925 | AI, Data, and Society in Health | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET9962 | Introduction to Mechanobiology | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET9981 | Applied Biomedical Engineering | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| BMET9997 | Biological Digital Signal Analysis | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| CIVL5320 | Engineering for Sustainable Development | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| CIVL5330 | Global Engineering Field Work | 6 |
Int July
107 - Int July
|
| CIVL9310 | Humanitarian Engineering | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| COMP5310 | Principles of Data Science | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| COMP5318 | Machine Learning and Data Mining | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| COMP5329 | Deep Learning | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| COMP5349 | Cloud Computing | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| COMP5427 | Usability Engineering | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| ELEC8883 | Bioelectronics | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| ELEC9302 | Signals and Systems | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| ELEC9704 | Electronic Devices and Circuits | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| ENGG5102 | Entrepreneurship for Engineers | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| ENGG5103 | Safety Systems and Risk Analysis | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| ENGG5202 | Sustainable Design, Engineering & Management | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| ENGG5203 | Quality Engineering and Management | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| MECH5311 | Microscopy and Microanalysis of Materials | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
Note: Candidates for Biomedical Specialisation must complete 48 credit points from among these units. Altenate units can be approved subject to permission of the Head of School.
Block 2 - Exchange Units (Max CP: 12)
| Unit Code | Unit Name | CP | Sessions Offered |
| ENGG5231 | Engineering Graduate Exchange A | 6 |
Int January
101 - Int January
Int July
107 - Int July
|
| ENGG5232 | Engineering Graduate Exchange B | 6 |
Int January
101 - Int January
Int July
107 - Int July
|
Note: Summer/Winter Exchange units require the approval of the Program Director. With approval, up to 12 credit points of Exchange units may taken in place of other units, towards the requirements of the degree.
| Course: | Master of Professional Engineering (Accelerated) (Biomedical) (2021) |
| CP Required: | 96 |
| Min FT Duration: | 2.00 Years |
| Min PT Duration: | N/A |
| Faculty/School: | Faculty of Engineering |
| Years Offered: | 2024, 2023, 2022, 2021, 2020, 2019 |
| Requirements: | To qualify for the award of the Master of Professional Engineering in this specialisation, a candidate must complete 96 credit points, including: (a) 36 credit points of Core units (b) ENGG5217 Practical Experience (c) 48 credit points of Elective units (d) A minimum of 12 credit points of Project or Research Pathway units (e) Candidates undertaking the Research Pathway, replace 12 credit points of elective units with Research Pathway units Admission to candidature Admission to candidature requires: EITHER (a) a Bachelor of Engineering from the University of Sydney, OR (b) equivalent qualification, with a minimum credit average; OR (c) a non-engineering bachelor's degree with a minimum credit average, with studies equivalent to 48 credit points in mathematics, physics, chemistry, biology, geology, computing or statistics, as related to the intended engineering specialisation. All candidates for admission must have prior learning equivalent to 48 credit points in total, which, in the estimation of the Dean, is comparable to the requirements for the first year of a Bachelor of Engineering at this University in the stream sought for admission. Credit for previous study Candidates with a Bachelor of Engineering or equivalent in the relevant discipline, and who have reached an acceptable level of academic achievement in their prior degree, may be eligible for a reduction of volume in learning of up to 48 credit points. A maximum of 72 credit points may be granted towards the Master of Professional Engineering from external postgraduate studies where no award has been, or will be made, provided the studies are acceptable to the Program Director Dean and are equivalent to units of study offered in the Master of Professional Engineering. Candidates transferring from the Master of Engineering to the Master of Professional Engineering may transfer up to 24 credit points provided units are equivalent to units of study offered in the Master of Professional Engineering. Any additional credit is subject to the approval by the Dean. Progression Candidates are required to meet the progression requirements as specified in the University's Coursework Rule. Course resolutions This course is administered under course resolutions published in the Faculty Handbook at http://sydney.edu.au/handbooks/ |
Report Type:
