Faculty of Engineering

Chemical & Biomolecular / Law (2020)


Note: This course version applies only to students first enrolling in 2020.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Chemical & Biomolecular / Law (2020)
CP Required: 288
Min FT Duration: 6.00 Years
Min PT Duration: N/A
Faculty/School: Faculty of Engineering
Years Offered: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

2. Requirements

Summary

In summary the requirements are:

Students must complete 288 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of Chemical stream core units

Laws:

► 144 credit points of Laws core units

► Candidates must complete the requirements for the Bachelor of Engineering Honours before proceeding to Year Five of the Bachelor of Laws

The handbook rules governing this degree are as follows:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

To qualify for the award of the combined degree:

(a) For the Bachelor of Engineering and Bachelor of Laws combined degree, a candidate must complete 288 credit points and any additional requirements specified in the following clauses.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Laws

For the Bachelor of Laws component of a combined degree candidates must complete 144 credit points of Law units of study taken from the School of Law Undergraduate Table, comprising:

(a) 102 credit points of compulsory units of study; and

(b) 42 credit points of elective units of study, of which a maximum of 36 credit points are taken from Part 1 and a minimum of 6 credit points are taken from Part 2.

(c) Students may apply to take up to a maximum of 24 credit points of LAWS6000/JURS6000 units of study as elective units of study:

(i) enrolment in LAWS6000/JURS6000 units of study will be subject to availability and any unit pre-requisites or assumed knowledge, which may include relevant industry experience or prior specialist study.

(ii) enrolment in LAWS6000/JURS6000 units is only permitted after a candidate has completed 96 credit points towards the Bachelor of Laws.

(iii) students may only enrol in LAWS6000/JURS6000 units listed in the Bachelor of Laws Elective units of study Table.

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type CP CP From
3 Select from MATH1021: Calculus of One Variable
6 Select from CHEM1111: Chemistry 1A
6 Select from LAWS1006: Foundations of Law
3 Select from MATH1002: Linear Algebra
6 Select from ENGG1801: Engineering Computing


Note: ENGG1810 Introduction to Engineering Computing replaces ENGG1801 from 2021.
0 Select from ENGP1000: Professional Engagement Program 1


Note: All students must enrol in ENGP1000 in their first semester of enrolment.

New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 1 - Semester 2

Type CP CP From
3 Select from MATH1023: Multivariable Calculus and Modelling
6 Select from CHEM1112: Chemistry 1B
3 Select from MATH1005: Statistical Thinking with Data
6 Select from CHNG1103: Conservation of Mass and Energy
6 Select from ENGG1111: Integrated Engineering 1
0 Select from LAWS1024: Legal Research

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 2 - Semester 1

Type CP CP From
6 Select from CHNG2803: Heat and Mass Transfer
6 Select from CHNG2802: Chemical Engineering Modelling and Analysis
6 Select from CHNG2801: Fluid Mechanics

Year 2 - Semester 2

Type CP CP From
6 Select from CHNG2806: Separation Processes
6 Select from LAWS1012: Torts
6 Select from CHNG2804: Chemical Engineering Thermodynamics
2 Select from ENGG2111: Integrated Engineering 2


Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111.
0 Select from ENGP2000: Professional Engagement Program 2


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes
6 Select from CHNG2805: Engineering for a Sustainable Society


Note: CHNG1106 replaces CHNG2805 from 2021.

Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111. Students may take this unit in the final semester or may swap with an elective to take it earlier.

https://canvas.sydney.edu.au/courses/2806/pages/feit-changes-to-the-bachelor-of-engineering-honours-degree-how-they-affect-you

Year 3 - Semester 1

Type CP CP From
6 Select from LAWS1014: Civil and Criminal Procedure
6 Select from CHNG3803: Reaction Engineering
6 Select from CHNG3802: Process Dynamics and Control
6 Select from CHNG3805: Particle Processing
2 Select from ENGG3111: Integrated Engineering 3


Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111.

Year 3 - Semester 2

Type CP CP From
6 Select from LAWS1016: Criminal Law
6 Select from CHNG3806: Risk Management for Chemical Engineering
6 Select from CHNG3804: Biochemical Engineering
6 Select from CHNG3801: Process Plant Design

Year 4 - Semester 1

Type CP CP From
6 Select from LAWS1023: Public International Law
6 Select from LAWS1015: Contracts
6 Select from CHNG4811: Thesis A
6 Select from CHNG4802: Chemical Engineering Design A
2 Select from ENGG4111: Integrated Engineering 4


Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111. ENGG3112 can be taken in this semester, or earlier by switching an elective.
0 Select from ENGP3000: Professional Engagement Program 3


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 4 - Semester 2

Type CP CP From
6 Select from LAWS1021: Public Law
6 Select from LAWS1017: Torts and Contracts II
6 Select from CHNG4812: Thesis B
6 Select from CHNG4806: Chemical Engineering Design B

Year 5 - Semester 1

Type CP CP From
6 Select from LAWS2013: The Legal Profession
6 Select from LAWS2012: Intro to Property and Commercial Law
6 Select from LAWS2011: Federal Constitutional Law
6 Select from LAWS2010: Administrative Law

Year 5 - Semester 2

Type CP CP From
6 Select from LAWS2017: Real Property
6 Select from LAWS2016: Evidence
6 Select from LAWS2015: Equity
6 Select from LAWS2014: Corporations Law

Year 6 - Semester 1

Type CP CP From
18 Select from Unit Block:
Law Electives
6 Select from LAWS2018: Private International Law A

Note: In year 6 students are required to complete LAWS2018 Private International Law A 42 credit points of elective units of study, of which a maximum of 36 credit points are taken from Part 1 and a minimum of 6 credit points are taken from Part 2. See Law Faculty Handbook for more details: http://sydney.edu.au/handbooks/law/

LAWS2018 may be taken in Semester 1 or Semester 2. Students who commenced the Combined Law program before 2011 do not need to complete LAWS2018 but must complete 48 credit points of elective units of study rather than 42 credit points.

Year 6 - Semester 2

Type CP CP From
24 Select from Unit Block:
Law Electives

4. Pathways

Alternate Thesis Pathway : Major Industrial Project Placement Scheme (MIPPS)

Type CP CP From
Core
24 CHNG4203: Major Industrial Project

Note: MIPPS students take CHNG4203 Major Industrial Project Placement (24 credit points). This unit replaces regular Honours Thesis units (CHNG4811 and CHNG4812) along with CHNG4001 Practical Experience, CHNG4112 Foundation of Chemical Engineering Design A and 6 credit points of electives. Students are admitted to MIPPS by school permission only. Applications are taken in third year of study.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
CHNG4203 Major Industrial Project 24 Semester 1
Semester 2
CHNG4811 Thesis A 6 Semester 1
Semester 2
CHNG4812 Thesis B 6 Semester 1
Semester 2
CIVL4022 Thesis A 6 Semester 1
Semester 2
CIVL4023 Thesis B 6 Semester 1
Semester 2
ELEC4712 Thesis A 6 Semester 1
Semester 2
ELEC4713 Thesis B 6 Semester 1
Semester 2
ELEC4714 Major Industrial Project 24 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4111 Integrated Engineering 4 2 Semester 1
ENGP1000 Professional Engagement Program 1 0 Semester 1
Semester 2
ENGP2000 Professional Engagement Program 2 0 Semester 1
Semester 2
ENGP3000 Professional Engagement Program 3 0 Semester 1
Semester 2
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 2 - CBE Core (Min CP: 108,Max CP: 108)

Unit Code Unit Name CP Sessions Offered
CHEM1111 Chemistry 1A 6 Semester 1
Semester 2
Int January
CHEM1112 Chemistry 1B 6 Semester 1
Semester 2
Int January
CHEM1911 Chemistry 1A (Adv) 6 Semester 1
CHEM1912 Chemistry 1B (Adv) 6 Semester 2
CHNG1103 Conservation of Mass and Energy 6 Semester 2
CHNG2801 Fluid Mechanics 6 Semester 1
CHNG2802 Chemical Engineering Modelling and Analysis 6 Semester 1
CHNG2803 Heat and Mass Transfer 6 Semester 1
CHNG2804 Chemical Engineering Thermodynamics 6 Semester 2
CHNG2805 Engineering for a Sustainable Society 6 Semester 2
CHNG2806 Separation Processes 6 Semester 2
CHNG3801 Process Plant Design 6 Semester 2
CHNG3802 Process Dynamics and Control 6 Semester 1
CHNG3803 Reaction Engineering 6 Semester 1
CHNG3804 Biochemical Engineering 6 Semester 2
CHNG3805 Particle Processing 6 Semester 1
CHNG3806 Risk Management for Chemical Engineering 6 Semester 2
CHNG4802 Chemical Engineering Design A 6 Semester 1
CHNG4806 Chemical Engineering Design B 6 Semester 2
ENGG1801 Engineering Computing 6 Semester 1
Int January

Block 3 - Laws Core (Min CP: 102,Max CP: 102)

Unit Code Unit Name CP Sessions Offered
LAWS1006 Foundations of Law 6 Semester 1
LAWS1012 Torts 6 Semester 2
S1 Intensive
LAWS1014 Civil and Criminal Procedure 6 Semester 1
LAWS1015 Contracts 6 Semester 1
Semester 2
Summer Early
LAWS1016 Criminal Law 6 Semester 1
Semester 2
LAWS1017 Torts and Contracts II 6 Semester 1
Semester 2
Winter Main
LAWS1021 Public Law 6 Semester 2
Int February
LAWS1023 Public International Law 6 Semester 1
Semester 2
LAWS1024 Legal Research 0 Semester 1
Semester 2
LAWS2010 Administrative Law 6 Semester 1
LAWS2011 Federal Constitutional Law 6 Semester 1
LAWS2012 Intro to Property and Commercial Law 6 Semester 1
LAWS2013 The Legal Profession 6 Semester 1
LAWS2014 Corporations Law 6 Semester 2
Winter Main
LAWS2015 Equity 6 Semester 2
Summer Main
LAWS2016 Evidence 6 Semester 2
Summer Early
LAWS2017 Real Property 6 Semester 2
Winter Main
LAWS2018 Private International Law A 6 Semester 1
Semester 2

Note: Select all 19 units (102 credit points).

Block 6 - Law Electives (Min CP: 42,Max CP: 42)

Note: Candidates must successfully complete 42 credit points from Law elective. See Law Faculty Handbook for details: http://sydney.edu.au/handbooks/law/