2. Requirements

Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 6 credit points of Introductory Computing units table

► 12 credit points of Foundations Mathematics units table

► 24 credit points of Project table

► The Professional Engagement Program comprising ENGP1001 (0cp), ENGP1002 (0cp), ENGP1003 (0cp), ENGP2001 (0cp), ENGP2002 (0cp), ENGP2003 (0cp), ENGP3001 (0cp) and ENGP3002 (0cp)

► 78 credit points of Mechanical (Space) stream core units

► 18 credit points of Mechanical (Space) Stream electives

► 6 credit points of Space elective units

► may take additional Mechanical Stream elective units if there is elective space in the degree

Science (96 credit points):

► *12 credit points of Science degree core units (12cp of MATH1XXX can count towards Engineering requirements)

► *48 credit points of Table A major

► 12 credit points of OLE units

► 24 credit points of electives from Science Table A or Table S

* The Science degree core units comprise 12 cp of MATH1xxx units and 12cp of 1000-level units from Table A. The 1000-level units from the Table A major count towards Science degree core requirement.

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type	CP	CP From
Projects Table	6	Select from MECH1560: Introduction to Mechanical Engineering
Introductory Computing Units	6	Select from ENGG1810: Introduction to Engineering Computing
Foundation Mathematics Units	3	Select from MATH1002: Linear Algebra
Foundation Mathematics Units	3	Select from MATH1021: Calculus of One Variable
Science Units	6	Select from Unit Block: Science Units
Professional Engagement Program (PEP) Units	0	Select from ENGP1001: Professional Engagement Program 1A Note: All students must enrol in ENGP1001 in their first semester of enrolment.

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 1 - Semester 2

Type	CP	CP From
Mechanical (Space) Stream Core	6	Select from AMME1802: Engineering Mechanics
Mechanical (Space) Stream Core	6	Select from AMME1362: Introduction to Engineering Materials
Foundation Mathematics Units	3	Select from MATH1023: Multivariable Calculus and Modelling
Foundation Mathematics Units	3	Select from MATH1005: Statistical Thinking with Data
Science Units	6	Select from Unit Block: Science Units
Professional Engagement Program (PEP) Units	0	Select from ENGP1002: Professional Engagement Program 1B

Year 2 - Semester 1

Type	CP	CP From
Science Units	6	Select from Unit Block: Science Units
Mechanical (Space) Stream Core	6	Select from AMME2261: Fluid Mechanics 1
Mechanical (Space) Stream Core	6	Select from AMME2500: Engineering Dynamics
Mechanical (Space) Stream Core	6	Select from AMME2000: Engineering Analysis
Professional Engagement Program (PEP) Units	0	Select from ENGP1003: Professional Engagement Program 1C

Year 2 - Semester 2

Type	CP	CP From
Mechanical (Space) Stream Core	6	Select from AMME2301: Mechanics of Solids
Mechanical (Space) Stream Core	6	Select from AMME2262: Introduction to Thermal Engineering
Science Units	6	Select from Unit Block: Science Units
Professional Engagement Program (PEP) Units	0	Select from ENGP2001: Professional Engagement Program 2A
Mechanical (Space) Stream Core	6	Select from MECH2400: Mechanical Systems Design 1 Note: From 2024, MECH2400 is offered in Semester 1 only. Students who have not completed MECH2400 should discuss an enrolment plan with their Academic Advisor.

Year 3 - Semester 1

Type	CP	CP From
Mechanical (Space) Stream Elective Units	6	Select from Unit Block: Mechanical (Space) Stream Elective Units
Science Units	12	Select from Unit Block: Science Units
Professional Engagement Program (PEP) Units	0	Select from ENGP2002: Professional Engagement Program 2B
Mechanical (Space) Stream Core	6	Select from AMME2700: Instrumentation Note: AMME2700 will be discontinued from 2024. Students who have not yet completed this unit should take AMME1705 in its place.

Year 3 - Semester 2

Type	CP	CP From
Mechanical (Space) Stream Core	6	Select from AERO2705: Space Engineering 1
Science Units	18	Select from Unit Block: Science Units
Professional Engagement Program (PEP) Units	0	Select from ENGP2003: Professional Engagement Program 2C

Year 4 - Semester 1

Type	CP	CP From
Mechanical (Space) Stream Elective Units	6	Select from Unit Block: Mechanical (Space) Stream Elective Units
Projects Table	6	Select from ENGG3112: Interdisciplinary Engineering
Science Units	12	Select from Unit Block: Science Units
Professional Engagement Program (PEP) Units	0	Select from ENGP3001: Professional Engagement Program 3A

Year 4 - Semester 2

Type	CP	CP From
Mechanical (Space) Stream Core	6	Select from AERO3760: Space Engineering 2
Mechanical (Space) Stream Elective Units	6	Select from Unit Block: Mechanical (Space) Stream Elective Units
Space Elective Units	6	Select from Unit Block: Space Elective Units
Science Units	6	Select from Unit Block: Science Units
Professional Engagement Program (PEP) Units	0	Select from ENGP3002: Professional Engagement Program 3B

Year 5 - Semester 1

Type	CP	CP From
Mechanical (Space) Stream Core	6	Select from AMME3500: System Dynamics and Control
Projects Table	6	Select from AMME4111: Thesis A
Mechanical (Space) Stream Core	6	Select from AERO4701: Space Engineering 3
List	6	Select from Unit Blocks: Mechanical (Space) Stream Elective Units Mechanical Stream Elective Units Science Units Note: As there are 12cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 12cp of electives from either Engineering or Science, or a combination of both. Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.

Year 5 - Semester 2

Type	CP	CP From
Projects Table	6	Select from AMME4112: Thesis B
List	6	Select from Unit Blocks: Mechanical (Space) Stream Elective Units Mechanical Stream Elective Units Science Units Note: As there are 12cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 12cp of electives from either Engineering or Science, or a combination of both. Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
Science Units	12	Select from Unit Block: Science Units

4. Pathways

No streams/majors defined for this course version.

5. Unit Blocks

Block 0 - Introductory Computing Units (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
ENGG1810	Introduction to Engineering Computing	6	Semester 1 Semester 2 Int February
INFO1110	Introduction to Programming	6	Semester 1 Semester 2
INFO1910	Introduction to Programming (Advanced)	6	Semester 1 Semester 2

Note: Students must complete:

-6cp from ENGG1810 or (INFO1110 or INFO1910). For Mechanical (Space) stream students it is recommended that ENGG1810 is taken.

Block 1 - Foundation Mathematics Units (Min CP: 12,Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1021	Calculus of One Variable	3	Semester 1 Semester 2
MATH1023	Multivariable Calculus and Modelling	3	Semester 1 Semester 2
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1905	Statistics (Advanced)	3	Semester 2
MATH1921	Calculus of One Variable (Adv)	3	Semester 1
MATH1923	Multivariable Calculus and Modelling (Adv)	3	Semester 2

Note: Complete a minimum of 12cp including:

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

Block 2 - Projects Table (Min CP: 24,Max CP: 24)

Unit Code	Unit Name	CP	Sessions Offered
AERO1560	Introduction to Aerospace Engineering	6	Semester 1
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
BMET1960	Biomedical Engineering 1A	6	Semester 1
CHNG1108	Introduction to Chemical Engineering	6	Semester 1
CIVL1900	Introduction to Civil Engineering	6	Semester 1
ELEC1004	Practical Introduction to Electrical Engineering	6	Semester 1
ENGG2112	Multi-disciplinary Engineering	6	Semester 1 Semester 2
ENGG3112	Interdisciplinary Engineering	6	Semester 1 Semester 2
MECH1560	Introduction to Mechanical Engineering	6	Semester 1
MTRX1701	Introduction to Mechatronic Engineering	6	Semester 1

Note: - Students are to select the introduction unit relevant to their stream. Students in both Electrical and Software Engineering streams are to take ELEC1004.

- Students enrolled in the Dalyell Stream may count any Engineering Dalyell unit in place of ENGG3112. The second Dalyell unit must be taken from the Combined degree.

- Students are to select the thesis units relevant to their stream. Aeronautical, Mechanical and Mechatronic students are to enrol in the AMME coded units. Students in both Electrical and Software are to enrol in the ELEC coded units.

Block 3 - Professional Engagement Program (PEP) Units

Unit Code	Unit Name	CP	Sessions Offered
ENGP1001	Professional Engagement Program 1A	0	Semester 1 Semester 2
ENGP1002	Professional Engagement Program 1B	0	Semester 1 Semester 2
ENGP1003	Professional Engagement Program 1C	0	Semester 1 Semester 2
ENGP2001	Professional Engagement Program 2A	0	Semester 1 Semester 2
ENGP2002	Professional Engagement Program 2B	0	Semester 1 Semester 2
ENGP2003	Professional Engagement Program 2C	0	Semester 1 Semester 2
ENGP3001	Professional Engagement Program 3A	0	Semester 1 Semester 2
ENGP3002	Professional Engagement Program 3B	0	Semester 1 Semester 2

Note: -Candidates for the Bachelor of Engineering Honours must complete the Professional Engagement Program units of study.

- Candidates must enrol in ENGP1001 in their first semester of study

Block 4 - Mechanical (Space) Stream Core (Min CP: 78,Max CP: 78)

Unit Code	Unit Name	CP	Sessions Offered
AERO2705	Space Engineering 1	6	Semester 2
AERO3760	Space Engineering 2	6	Semester 2
AERO4701	Space Engineering 3	6	Semester 1
AMME1362	Introduction to Engineering Materials	6	Semester 2
AMME1802	Engineering Mechanics	6	Semester 2
AMME2000	Engineering Analysis	6	Semester 1
AMME2261	Fluid Mechanics 1	6	Semester 1
AMME2262	Introduction to Thermal Engineering	6	Semester 2
AMME2301	Mechanics of Solids	6	Semester 2
AMME2500	Engineering Dynamics	6	Semester 1
AMME2700	Instrumentation	6	Semester 1
AMME3500	System Dynamics and Control	6	Semester 1
MECH2400	Mechanical Systems Design 1	6	Semester 1

Block 5 - Mechanical (Space) Stream Elective Units (Min CP: 18,Max CP: 24)

Unit Code	Unit Name	CP	Sessions Offered
MECH3260	Thermal Engineering and Environment	6	Semester 2
MECH3261	Fluid Mechanics 2	6	Semester 1
MECH3361	Mechanics of Solids 2	6	Semester 2
MECH3362	Engineering Materials for Adv Manufacturing	6	Semester 1

Block 6 - Space Elective Units (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
AERO5700	Space Engineering (Advanced)	6	Semester 1 Semester 2
AMME3060	Engineering Methods	6	Semester 2
AMME4010	Major Industrial Project	24	Semester 1 Semester 2
AMME4710	Computer Vision and Image Processing	6	Semester 2
AMME5202	Computational Fluid Dynamics	6	Semester 1
AMME5292	Applied Fluid Dynamics and Turbulence	6	Semester 1
AMME5510	Vibration and Acoustics	6	Semester 2
AMME5520	Advanced Control and Optimisation	6	Semester 1
AMME5902	Computer Aided Manufacturing	6	Semester 2
AMME5912	Crash Analysis and Design	6	Semester 1
MECH5265	Combustion	6	Semester 2
MECH5304	Materials Failure	6	Semester 2
MECH5305	Smart Materials	6	Semester 2
MECH5310	Advanced Engineering Materials	6	Semester 1
MECH5311	Microscopy and Microanalysis of Materials	6	Semester 1
MECH5720	Sensors and Signals	6	Semester 2

Block 7 - Mechanical Stream Elective Units

Unit Code	Unit Name	CP	Sessions Offered
AMME3060	Engineering Methods	6	Semester 2
AMME4401	Industrial and Product Design Engineering	6	Semester 2
AMME5060	Advanced Computational Engineering	6	Semester 2
AMME5101	Energy and the Environment	6	Semester 1
AMME5104	Applied Safety Systems and Risk Analysis	6	Semester 1
AMME5105	Risk Management Analysis	6	Semester 1
AMME5202	Computational Fluid Dynamics	6	Semester 1
AMME5271	Computational Nanotechnology	6	Semester 2
AMME5292	Applied Fluid Dynamics and Turbulence	6	Semester 1
AMME5310	Engineering Tribology	6	Semester 1
AMME5510	Vibration and Acoustics	6	Semester 2
AMME5520	Advanced Control and Optimisation	6	Semester 1
AMME5902	Computer Aided Manufacturing	6	Semester 2
AMME5912	Crash Analysis and Design	6	Semester 1
MECH2401	Human-Centred Engineering Design	6	Semester 2
MECH4460	Design of Micro- and Nanosystems	6	Semester 1
MECH4660	Engineering Management [not running in 2019]	6	Semester 1
MECH5255	Air Conditioning and Refrigeration	6	Semester 2
MECH5265	Combustion	6	Semester 2
MECH5275	Renewable Energy	6	Semester 2
MECH5304	Materials Failure	6	Semester 2
MECH5305	Smart Materials	6	Semester 2
MECH5310	Advanced Engineering Materials	6	Semester 1
MECH5311	Microscopy and Microanalysis of Materials	6	Semester 1

Note: Students may select units from this collection if they have elective space in their degree.

Block 10 - Science Units (Min CP: 78,Max CP: 96)

Note: Candidates must complete 96 credit points of Science study, including at least one major in a Science subject area and 12 credit points of OLEs. Math units taken as part of the Engineering component may be counted towards the 96 cp total. See Science faculty handbook for list of Science units and majors: http://sydney.edu.au/handbooks/science/

Course:	Mechanical (Space) / Science (2021)
CP Required:	240
Min FT Duration:	5.00 Years
Min PT Duration:	5.00 Years
Faculty/School:	Faculty of Engineering
Years Offered:	2025, 2024, 2023, 2022, 2021, 2016, 2015

Faculty of Engineering

Mechanical (Space) / Science (2021)

1. Overview