Faculty of Engineering |
Course: | Aeronautical / Science (2025) |
CP Required: | 240 |
Min FT Duration: | 5.00 Years |
Min PT Duration: | 5.00 Years |
Faculty/School: | Faculty of Engineering |
Years Offered: | 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015 |
Type | CP | CP From |
6 |
Select from
AERO1560: Introduction to Aerospace Engineering |
|
0 |
Select from
ENGP1001: Professional Engagement Program 1A Note: All students must enrol in ENGP1001 in their first semester of enrolment. |
|
6 |
Select from
ENGG1810: Introduction to Engineering Computing |
|
6 |
Select from
Unit Block: Science Units |
|
6 |
Select from
MATH1061: Mathematics 1A |
Note: MATH1061 may be replaced by advanced unit MATH1961, subject to prerequisite conditions being met. Students should seek advice from their school before enrolling.
Type | CP | CP From |
6 |
Select from
AMME1802: Engineering Mechanics |
|
0 |
Select from
ENGP1002: Professional Engagement Program 1B |
|
6 |
Select from
AERO1400: Intro to Aircraft Construction and Design |
|
6 |
Select from
Unit Block: Science Units |
|
6 |
Select from
MATH1062: Mathematics 1B |
Note: MATH1062 may be replaced by advanced unit MATH1962.
Type | CP | CP From |
6 |
Select from
AMME2500: Engineering Dynamics |
|
0 |
Select from
ENGP1003: Professional Engagement Program 1C |
|
6 |
Select from
AMME2000: Engineering Analysis |
|
6 |
Select from
AMME1705: Introduction to Electromechanical Systems |
|
6 |
Select from
Unit Block: Science Units |
Type | CP | CP From |
6 |
Select from
AMME2301: Mechanics of Solids |
|
6 |
Select from
AMME2200: Introductory Thermofluids |
|
6 |
Select from
AMME1362: Introduction to Engineering Materials |
|
0 |
Select from
ENGP2001: Professional Engagement Program 2A |
|
6 |
Select from
Unit Block: Science Units |
Type | CP | CP From |
0 |
Select from
ENGP2002: Professional Engagement Program 2B |
|
6 |
Select from
ENGG2112: Multi-disciplinary Engineering |
|
6 |
Select from
AMME3500: System Dynamics and Control |
|
6 |
Select from
AERO2710: Analysis of Aerospace Engineering Data |
|
6 |
Select from
Unit Block: Science Units |
Type | CP | CP From |
0 |
Select from
ENGP2003: Professional Engagement Program 2C |
|
6 |
Select from
AERO2703: Aircraft Performance and Operations |
|
6 |
Select from
AERO3560: Flight Mechanics 1 |
|
6 |
Select from
AERO2460: Aerospace Design 1 |
|
6 |
Select from
Unit Block: Science Units |
Type | CP | CP From |
0 |
Select from
ENGP3001: Professional Engagement Program 3A |
|
6 |
Select from
AERO3261: Propulsion |
|
6 |
Select from
AERO3360: Aerospace Structures 1 |
|
6 |
Select from
ENGG3112: Interdisciplinary Engineering |
|
6 |
Select from
Unit Block: Science Units |
Type | CP | CP From |
0 |
Select from
ENGP3002: Professional Engagement Program 3B |
|
6 |
Select from
AERO3260: Aerodynamics 1 |
|
6 |
Select from
AERO3465: Aerospace Design 2 |
|
12 |
Select from
Unit Block: Science Units |
Type | CP | CP From |
6 |
Select from
AERO4460: Aerospace Design 3 |
|
6 |
Select from
AMME4111: Thesis A |
|
6 |
Select from
Unit Block: Aeronautical Stream Core Extension Units |
|
6 |
Select from
Unit Block: Science Units |
Type | CP | CP From |
6 |
Select from
AMME4112: Thesis B |
|
6 |
Select from
Unit Block: Aeronautical Stream Core Extension Units |
|
12 |
Select from
Unit Block: Science Units |
Unit Code | Unit Name | CP | Sessions Offered |
ENGG1810 | Introduction to Engineering Computing | 6 |
Semester 1 Semester 2 Int February |
INFO1110 | Introduction to Programming | 6 |
Semester 1 Semester 2 |
INFO1910 | Introduction to Programming (Advanced) | 6 |
Semester 1 Semester 2 |
Note:
Students must complete:
-6cp from ENGG1810 or (INFO1110 or INFO1910). For Aeronautical stream students it is recommended that ENGG1810 is taken.
Unit Code | Unit Name | CP | Sessions Offered |
MATH1061 | Mathematics 1A | 6 |
Semester 1 Semester 2 |
MATH1062 | Mathematics 1B | 6 |
Semester 1 Semester 2 |
MATH1961 | Mathematics 1A (Advanced) | 6 |
Semester 1 |
MATH1962 | Mathematics 1B (Advanced) | 6 |
Semester 2 |
Unit Code | Unit Name | CP | Sessions Offered |
AERO1560 | Introduction to Aerospace Engineering | 6 |
Semester 1 |
AMME4111 | Thesis A | 6 |
Semester 1 Semester 2 |
AMME4112 | Thesis B | 6 |
Semester 1 Semester 2 |
BMET1960 | Biomedical Engineering 1A | 6 |
Semester 1 |
CHNG1108 | Introduction to Chemical Engineering | 6 |
Semester 1 |
CIVL1900 | Introduction to Civil Engineering | 6 |
Semester 1 |
ELEC1004 | Practical Introduction to Electrical Engineering | 6 |
Semester 1 |
ELEC1005 | Introduction to Software Engineering | 6 |
Semester 1 |
ENGG1800 | Introduction to Engineering A | 6 |
Semester 1 |
ENGG2112 | Multi-disciplinary Engineering | 6 |
Semester 1 Semester 2 |
ENGG3112 | Interdisciplinary Engineering | 6 |
Semester 1 Semester 2 |
MECH1560 | Introduction to Mechanical Engineering | 6 |
Semester 1 |
MTRX1701 | Introduction to Mechatronic Engineering | 6 |
Semester 1 |
Note:
- Students are to select the introduction unit relevant to their stream.
- Students are to select the thesis units relevant to their stream. Aeronautical, Mechanical and Mechatronic students are to enrol in the AMME coded units. Students in both Electrical and Software are to enrol in the ELEC coded units.
Unit Code | Unit Name | CP | Sessions Offered |
ENGP1001 | Professional Engagement Program 1A | 0 |
Semester 1 Semester 2 |
ENGP1002 | Professional Engagement Program 1B | 0 |
Semester 1 Semester 2 |
ENGP1003 | Professional Engagement Program 1C | 0 |
Semester 1 Semester 2 |
ENGP2001 | Professional Engagement Program 2A | 0 |
Semester 1 Semester 2 |
ENGP2002 | Professional Engagement Program 2B | 0 |
Semester 1 Semester 2 |
ENGP2003 | Professional Engagement Program 2C | 0 |
Semester 1 Semester 2 |
ENGP3001 | Professional Engagement Program 3A | 0 |
Semester 1 Semester 2 |
ENGP3002 | Professional Engagement Program 3B | 0 |
Semester 1 Semester 2 |
Note:
-Candidates for the Bachelor of Engineering Honours must complete the Professional Engagement Program units of study.
- Candidates must enrol in ENGP1001 in their first semester of study
Unit Code | Unit Name | CP | Sessions Offered |
AERO1400 | Intro to Aircraft Construction and Design | 6 |
Semester 2 |
AERO2460 | Aerospace Design 1 | 6 |
Semester 2 |
AERO2703 | Aircraft Performance and Operations | 6 |
Semester 2 |
AERO2710 | Analysis of Aerospace Engineering Data | 6 |
Semester 1 |
AERO3260 | Aerodynamics 1 | 6 |
Semester 2 |
AERO3261 | Propulsion | 6 |
Semester 1 |
AERO3360 | Aerospace Structures 1 | 6 |
Semester 1 |
AERO3465 | Aerospace Design 2 | 6 |
Semester 2 |
AERO3560 | Flight Mechanics 1 | 6 |
Semester 2 |
AERO4460 | Aerospace Design 3 | 6 |
Semester 1 |
AMME1362 | Introduction to Engineering Materials | 6 |
Semester 2 |
AMME1705 | Introduction to Electromechanical Systems | 6 |
Semester 1 |
AMME1802 | Engineering Mechanics | 6 |
Semester 2 |
AMME2000 | Engineering Analysis | 6 |
Semester 1 |
AMME2200 | Introductory Thermofluids | 6 |
Semester 2 |
AMME2301 | Mechanics of Solids | 6 |
Semester 2 |
AMME2500 | Engineering Dynamics | 6 |
Semester 1 |
AMME3500 | System Dynamics and Control | 6 |
Semester 1 |
Unit Code | Unit Name | CP | Sessions Offered |
AERO5260 | Aerodynamics 2 | 6 |
Semester 1 |
AERO5360 | Aerospace Structures 2 | 6 |
Semester 1 |
AERO5560 | Flight Mechanics 2 | 6 |
Semester 2 |
Note:
Candidates must complete 84 credit points of Science study, including at least one major in a Science subject area and 6 credit points of OLEs. (Math units taken as part of the Engineering component meet the requirement of 12 cp of Science core, therefore students complete 72 cp Science total.)
See Science faculty handbook for list of Science units and majors: http://sydney.edu.au/handbooks/science/