2. Requirements

Summary

In summary the requirements are:

Students must complete 288 credit points as follows:

Engineering (144 credit points):

► 24 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of Aeronautical stream core units

► 12 credit points of Aeronautical Specialist elective units

Laws:

► 144 credit points of Laws core units

► Candidates must complete the requirements for the Bachelor of Engineering Honours before proceeding to Year Five of the Bachelor of Laws

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For the Bachelor of Engineering and Bachelor of Laws combined degree, a candidate must complete 288 credit points and any additional requirements specified in the following clauses.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Laws

For the Bachelor of Laws component of a combined degree candidates must complete 144 credit points of Law units of study taken from the School of Law Undergraduate Table, comprising:

(a) 102 credit points of compulsory units of study; and

(b) 42 credit points of elective units of study, of which a maximum of 36 credit points are taken from Part 1 and a minimum of 6 credit points are taken from Part 2.

(c) Students may apply to take up to a maximum of 24 credit points of LAWS6000/JURS6000 units of study as elective units of study:

(i) enrolment in LAWS6000/JURS6000 units of study will be subject to availability and any unit pre-requisites or assumed knowledge, which may include relevant industry experience or prior specialist study.

(ii) enrolment in LAWS6000/JURS6000 units is only permitted after a candidate has completed 96 credit points towards the Bachelor of Laws.

(iii) students may only enrol in LAWS6000/JURS6000 units listed in the Bachelor of Laws Elective units of study Table.

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type	CP	CP From
Aeronautical Stream Core	6	Select from AERO1560: Introduction to Aerospace Engineering
Engineering Core	3	Select from MATH1021: Calculus of One Variable
Aeronautical Stream Core	6	Select from ENGG1801: Engineering Computing
Engineering Core	3	Select from MATH1002: Linear Algebra
Law Junior Core	6	Select from LAWS1006: Foundations of Law
Engineering Core	0	Select from ENGP1000: Professional Engagement Program 1 Note: All students must enrol in ENGP1000 in their first semester of enrolment. New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 1 - Semester 2

Type	CP	CP From
Aeronautical Stream Core	6	Select from AMME1362: Introduction to Engineering Materials
Engineering Core	3	Select from MATH1023: Multivariable Calculus and Modelling
Aeronautical Stream Core	6	Select from ENGG1802: Engineering Mechanics
Law Junior Core	6	Select from LAWS1012: Torts
Engineering Core	3	Select from MATH1005: Statistical Thinking with Data
Law Junior Core	0	Select from LAWS1013: Legal Research 1

Year 2 - Semester 1

Type	CP	CP From
Law Junior Core	6	Select from LAWS1014: Civil and Criminal Procedure
Aeronautical Stream Core	6	Select from AMME2261: Fluid Mechanics 1
Aeronautical Stream Core	6	Select from AMME2500: Engineering Dynamics
Aeronautical Stream Core	6	Select from AMME2700: Instrumentation Note: AMME2700 will be discontinued from 2024. Students who have not yet completed this unit should take AMME1705 in its place.

Year 2 - Semester 2

Type	CP	CP From
Law Junior Core	6	Select from LAWS1016: Criminal Law
Aeronautical Stream Core	6	Select from AERO2703: Aircraft Performance and Operations
Aeronautical Stream Core	6	Select from AMME2301: Mechanics of Solids
Engineering Core	0	Select from ENGP2000: Professional Engagement Program 2 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes
Aeronautical Stream Core	6	Select from MECH2400: Mechanical Systems Design 1 Note: From 2024, MECH2400 is offered in Semester 1 only. Students who have not completed MECH2400 should discuss an enrolment plan with their Academic Advisor.

Year 3 - Semester 1

Type	CP	CP From
Law Junior Core	6	Select from LAWS1015: Contracts
Law Junior Core	0	Select from LAWS1019: Legal Research II
Aeronautical Stream Core	6	Select from AERO3360: Aerospace Structures 1
Aeronautical Stream Core	6	Select from AERO3460: Aerospace Design 1
Aeronautical Stream Core	6	Select from AMME3500: System Dynamics and Control

Year 3 - Semester 2

Type	CP	CP From
Law Junior Core	6	Select from LAWS1017: Torts and Contracts II
Aeronautical Stream Core	6	Select from AMME2262: Introduction to Thermal Engineering
Aeronautical Stream Core	6	Select from AERO3260: Aerodynamics 1
Aeronautical Stream Core	6	Select from AERO3560: Flight Mechanics 1

Year 4 - Semester 1

Type	CP	CP From
Law Junior Core	6	Select from LAWS1023: Public International Law
Aeronautical Stream Core	6	Select from AERO3261: Propulsion
Aeronautical Stream Core	6	Select from AERO4460: Aerospace Design 3
Engineering Core	6	Select from AMME4111: Thesis A
Engineering Core	0	Select from ENGP3000: Professional Engagement Program 3 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 4 - Semester 2

Type	CP	CP From
Law Junior Core	6	Select from LAWS1021: Public Law
Engineering Core	6	Select from AMME4112: Thesis B
Aeronautical Specialist Electives	12	Select from Unit Block: Aeronautical Specialist Electives

Year 5 - Semester 1

Type	CP	CP From
Law Senior Core	6	Select from LAWS2010: Administrative Law
Law Senior Core	6	Select from LAWS2011: Federal Constitutional Law
Law Senior Core	6	Select from LAWS2013: The Legal Profession
Law Senior Core	6	Select from LAWS2012: Intro to Property and Commercial Law

Note: To progress to the final two years of the combined Law degree students must have completed all requirements for the award ot Bachelor of Engineering Honours. Students will be awarded the Engineering component of this combined degree at the end of 4th year. Students will then be under the jurisdiction of the Law School for the final two years.

Year 5 - Semester 2

Type	CP	CP From
Law Senior Core	6	Select from LAWS2014: Corporations Law
Law Senior Core	6	Select from LAWS2015: Equity
Law Senior Core	6	Select from LAWS2016: Evidence
Law Senior Core	6	Select from LAWS2017: Real Property

Year 6 - Semester 1

Type	CP	CP From
Law Senior Core	6	Select from LAWS2018: Private International Law A
Law Senior Electives	18	Select from Unit Block: Law Senior Electives

Note: In year 6 students are required to complete LAWS2018 Private International Law A plus 42 credit points from Semester 1 Senior Elective Units as listed in Law Faculty Handbook Table 1. See Law Faculty Handbook for more details: http://sydney.edu.au/handbooks/law/

LAWS2018 may be taken in Semester 1 or Semester 2. Students who commenced the Combined Law program before 2011 do not need to complete LAWS2018 but must complete 48 credit points of Law Senior Elective units of study rather than 42 credit points.

Year 6 - Semester 2

Type	CP	CP From
Law Senior Electives	24	Select from Unit Block: Law Senior Electives

4. Pathways

Major in Space Engineering

Type	CP	CP From
Aeronautical Stream Core	6	Select from AERO1560: Introduction to Aerospace Engineering
Space Major Core	18	Select from AERO2705: Space Engineering 1 AERO3760: Space Engineering 2 AERO4701: Space Engineering 3
Engineering Core	12	Select from AMME4111: Thesis A AMME4112: Thesis B
Space Specialist Electives	12	Select from Unit Block Space Specialist Electives

Note: To be eligible for this major, students are required to meet progression requirements. There are minimum ATAR or WAM (>75%) entry requirements for enrolment in this major.

Students undertaking this major are not required to do Integrated Engineering units (ENGG1111, ENGG2111, ENGG3111, ENGG4111), and are exempt from AERO2703 and AERO4460.

5. Unit Blocks

Block 1 - Aeronautical Specialist Electives (Min CP: 12,Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
AERO4260	Aerodynamics 2	6	Semester 1
AERO4360	Aerospace Structures 2	6	Semester 1
AERO4560	Flight Mechanics 2	6	Semester 2

Block 2 - Space Specialist Electives (Min CP: 12,Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
AERO4260	Aerodynamics 2	6	Semester 1
AERO4360	Aerospace Structures 2	6	Semester 1
AERO4560	Flight Mechanics 2	6	Semester 2
AERO5700	Space Engineering (Advanced)	6	Semester 1 Semester 2
AERO5750	Unmanned Air Vehicle Systems	6	Semester 1
AMME3060	Engineering Methods	6	Semester 2
AMME4710	Computer Vision and Image Processing	6	Semester 2
AMME5202	Computational Fluid Dynamics	6	Semester 1
AMME5510	Vibration and Acoustics	6	Semester 2
AMME5520	Advanced Control and Optimisation	6	Semester 1
AMME5790	Introduction to Biomechatronics	6	Semester 2
AMME5912	Crash Analysis and Design	6	Semester 1
MECH5265	Combustion	6	Semester 2
MECH5310	Advanced Engineering Materials	6	Semester 1
MECH5720	Sensors and Signals	6	Semester 2
MTRX5700	Experimental Robotics	6	Semester 1

Block 3 - Engineering Core (Min CP: 24,Max CP: 24)

Unit Code	Unit Name	CP	Sessions Offered
AMME4010	Major Industrial Project	24	Semester 1 Semester 2
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
CHNG4203	Major Industrial Project	24	Semester 1 Semester 2
CHNG4811	Thesis A	6	Semester 1 Semester 2
CHNG4812	Thesis B	6	Semester 1 Semester 2
CIVL4022	Thesis A	6	Semester 1 Semester 2
CIVL4023	Thesis B	6	Semester 1 Semester 2
ELEC4712	Thesis A	6	Semester 1 Semester 2
ELEC4713	Thesis B	6	Semester 1 Semester 2
ELEC4714	Major Industrial Project	24	Semester 1 Semester 2
ENGP1000	Professional Engagement Program 1	0	Semester 1 Semester 2
ENGP2000	Professional Engagement Program 2	0	Semester 1 Semester 2
ENGP3000	Professional Engagement Program 3	0	Semester 1 Semester 2
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1021	Calculus of One Variable	3	Semester 1 Semester 2
MATH1023	Multivariable Calculus and Modelling	3	Semester 1 Semester 2
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1905	Statistics (Advanced)	3	Semester 2
MATH1921	Calculus of One Variable (Adv)	3	Semester 1
MATH1923	Multivariable Calculus and Modelling (Adv)	3	Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 4 - Aeronautical Stream Core (Min CP: 108,Max CP: 108)

Unit Code	Unit Name	CP	Sessions Offered
AERO1560	Introduction to Aerospace Engineering	6	Semester 1
AERO2703	Aircraft Performance and Operations	6	Semester 2
AERO3260	Aerodynamics 1	6	Semester 2
AERO3261	Propulsion	6	Semester 1
AERO3360	Aerospace Structures 1	6	Semester 1
AERO3460	Aerospace Design 1	6	Semester 1
AERO3560	Flight Mechanics 1	6	Semester 2
AERO4460	Aerospace Design 3	6	Semester 1
AMME1362	Introduction to Engineering Materials	6	Semester 2
AMME2261	Fluid Mechanics 1	6	Semester 1
AMME2262	Introduction to Thermal Engineering	6	Semester 2
AMME2301	Mechanics of Solids	6	Semester 2
AMME2500	Engineering Dynamics	6	Semester 1
AMME2700	Instrumentation	6	Semester 1
AMME3500	System Dynamics and Control	6	Semester 1
ENGG1801	Engineering Computing	6	Semester 1 Int January
ENGG1802	Engineering Mechanics	6	Semester 2 Summer Main Int January
MECH2400	Mechanical Systems Design 1	6	Semester 1

Block 5 - Law Junior Core (Min CP: 48,Max CP: 48)

Unit Code	Unit Name	CP	Sessions Offered
LAWS1006	Foundations of Law	6	Semester 1
LAWS1012	Torts	6	Semester 2 S1 Intensive
LAWS1013	Legal Research 1	0	Semester 1 Semester 2
LAWS1014	Civil and Criminal Procedure	6	Semester 1
LAWS1015	Contracts	6	Semester 1 Semester 2 Summer Early
LAWS1016	Criminal Law	6	Semester 1 Semester 2
LAWS1017	Torts and Contracts II	6	Semester 1 Semester 2 Winter Main
LAWS1019	Legal Research II	0	Semester 1 Semester 2
LAWS1021	Public Law	6	Semester 2 Int February
LAWS1023	Public International Law	6	Semester 1 Semester 2

Block 6 - Law Senior Core (Min CP: 54,Max CP: 54)

Unit Code	Unit Name	CP	Sessions Offered
LAWS2010	Administrative Law	6	Semester 1
LAWS2011	Federal Constitutional Law	6	Semester 1
LAWS2012	Intro to Property and Commercial Law	6	Semester 1
LAWS2013	The Legal Profession	6	Semester 1
LAWS2014	Corporations Law	6	Semester 2 Winter Main
LAWS2015	Equity	6	Semester 2 Summer Main
LAWS2016	Evidence	6	Semester 2 Summer Early
LAWS2017	Real Property	6	Semester 2 Winter Main
LAWS2018	Private International Law A	6	Semester 1 Semester 2

Block 7 - Law Senior Electives (Min CP: 42,Max CP: 42)

Note: Electives are chosen from the list of senior LAW units as listed in the Law School faculty handbook.

Block 8 - Space Major Core (Max CP: 18)

Unit Code	Unit Name	CP	Sessions Offered
AERO2705	Space Engineering 1	6	Semester 2
AERO3760	Space Engineering 2	6	Semester 2
AERO4701	Space Engineering 3	6	Semester 1

Note: These units are only available to students enrolled in the Space major. ATAR/WAM requirements apply.

Course:	Aeronautical / Law (2019)
CP Required:	288
Min FT Duration:	6.00 Years
Min PT Duration:	N/A
Faculty/School:	Faculty of Engineering
Years Offered:	2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

Faculty of Engineering

Aeronautical / Law (2019)

1. Overview