Faculty of Engineering

Aeronautical Engineering (mid-year) (2020)


Note: This course version applies only to students first enrolling in 2020.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Aeronautical Engineering (mid-year) (2020)
CP Required: 192
Min FT Duration: 4.00 Years
Min PT Duration: 4.00 Years
Faculty/School: Faculty of Engineering
Years Offered: 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016

2. Requirements

Summary

In summary the requirements are:

Students must complete 192 credit points as follows:

► 36 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of Aeronautical stream core units

► A minimum of 24 credit points of Aeronautical Specialist electives

► A minimum of 12 credit points of Aeronautical Advanced Specialist electives

► A maximum of 6 credit points of General (Free) Electives

The completion of a major is not necessary. If a student chooses to do a major, aligned majors can be completed within the 192 credit points described above.

Handbook Rules

The handbook rules governing this degree are as follows:

To qualify for the award of the Bachelor of Engineering Honours degree, a candidate must:

(a) successfully complete 192 credit points comprising:

(i) A minimum of 36 credit points from the Engineering Core Table, including all required units;

(ii) A minimum of 108 credit points from the Engineering Stream Table pertaining to the specialist stream being undertaken, including all required units;

(iii) A minimum of 48 credit points of additional units from the Engineering Stream Specialist Table pertaining to the specialist stream being undertaken, including satisfying any additional requirements specified for the Specialist Table.

(b) Successfully complete the requirements of the Professional Engagement Program

(2) The class of Honours will be determined by the EIHWAM.

(3) In exceptional circumstances, the Dean may vary the conditions for the award of Honours after seeking the advice of the relevant Head of School.

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester's standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Majors

A major requires:

(a) the completion of 48 credit points chosen from units of study listed in the table for that major;

(b) satisfying any additional requirements specified for the major, and listed with the table of units for the major;

Dalyell Scholars Program

Unit substitutions may be available for students enrolled in the Dalyell Scholars Program, depending on their year of commencement and degree. Dalyell Scholars can view the Canvas page for further information specific to their circumstances: https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 2

Type CP CP From
3 Select from MATH1005: Statistical Thinking with Data
3 Select from MATH1021: Calculus of One Variable
6 Select from AMME1362: Introduction to Engineering Materials
6 Select from AERO1400: Intro to Aircraft Construction and Design
6 Select from AMME1802: Engineering Mechanics
0 Select from ENGP1000: Professional Engagement Program 1


Note: All students must enrol in ENGP1000 in their first semester of enrolment.

New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 2 - Semester 1

Type CP CP From
3 Select from MATH1023: Multivariable Calculus and Modelling
6 Select from ENGG1111: Integrated Engineering 1
3 Select from MATH1002: Linear Algebra
6 Select from AERO1560: Introduction to Aerospace Engineering
6 Select from ENGG1810: Introduction to Engineering Computing


Note: ENGG1810 replaces ENGG1801 from 2021.

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 2 - Semester 2

Type CP CP From
6 Select from AERO2703: Aircraft Performance and Operations
6 Select from AMME2262: Introduction to Thermal Engineering
6 Select from AMME2301: Mechanics of Solids
2 Select from ENGG2111: Integrated Engineering 2


Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111.
6 Select from MECH2400: Mechanical Systems Design 1


Note: From 2024, MECH2400 is offered in Semester 1 only. Students who have not completed MECH2400 should discuss an enrolment plan with their Academic Advisor.

Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111. Students may take this unit in the final semester or may swap with an elective to take it earlier.

https://canvas.sydney.edu.au/courses/2806/pages/feit-changes-to-the-bachelor-of-engineering-honours-degree-how-they-affect-you

Year 3 - Semester 1

Type CP CP From
6 Select from AMME2261: Fluid Mechanics 1
6 Select from AMME2500: Engineering Dynamics
6 Select from AMME2000: Engineering Analysis
or other units.
6 Select from AMME2700: Instrumentation


Note: AMME2700 will be discontinued from 2024. Students who have not yet completed this unit should take AMME1705 in its place.

Year 3 - Semester 2

Type CP CP From
6 Select from AERO3465: Aerospace Design 2
or other units.
6 Select from AMME3060: Engineering Methods
or other units.
6 Select from AERO3260: Aerodynamics 1
6 Select from AERO3560: Flight Mechanics 1
0 Select from ENGP2000: Professional Engagement Program 2


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 4 - Semester 1

Type CP CP From
6 Select from AERO3261: Propulsion
6 Select from AERO3360: Aerospace Structures 1
6 Select from AERO3460: Aerospace Design 1
6 Select from AMME3500: System Dynamics and Control
2 Select from ENGG3111: Integrated Engineering 3


Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111.

Year 4 - Semester 2

Type CP CP From
6 Select from Unit Block:
Aeronautical Specialist Electives
6 Select from AMME4111: Thesis A
0 Select from ENGP3000: Professional Engagement Program 3


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes
6 Select from AERO5560: Flight Mechanics 2
or other units.

Note: At least two units must be completed from AERO5360 (Semester 1) or AERO5560 (Semester 2) or AERO5260 (Semester 1).

AERO4260, AERO4360 and AERO4560 have been recoded in 2025. Students who have not yet completed their Aeronautical Stream Advanced Specialist requirements should enrol in the 5000-level unit/s.

Year 5 - Semester 1

Type CP CP From
6 Select from AERO4460: Aerospace Design 3
6 Select from Unit Block:
Aeronautical Specialist Electives
6 Select from AMME4112: Thesis B
2 Select from ENGG4111: Integrated Engineering 4


Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111. ENGG3112 can be taken in this semester, or earlier by switching an elective.
6 Select from AERO5260: Aerodynamics 2
AERO5360: Aerospace Structures 2


Note: At least two units must be completed from AERO5360 (Semester 1) or AERO5560 (Semester 2) or AERO5260 (Semester 1).

AERO4260, AERO4360 and AERO4560 have been recoded in 2025. Students who have not yet completed their Aeronautical Stream Advanced Specialist requirements should enrol in the 5000-level unit/s.

4. Pathways

Major in Computational Engineering

Type CP CP From
24 Select from AMME4111: Thesis A
AMME4112: Thesis B
MATH1002: Linear Algebra
MATH1005: Statistical Thinking with Data
MATH1021: Calculus of One Variable
MATH1023: Multivariable Calculus and Modelling
18 Select from AMME2000: Engineering Analysis
AMME3060: Engineering Methods
AMME5060: Advanced Computational Engineering
List
12 Select from AERO4360: Aerospace Structures 2
AMME5202: Computational Fluid Dynamics


Note: Alternative units AMME5271 Computational Nanotechnology and AMME5912 Crash Analysis and Design may be selected from the free electives collection.

Major in Engineering Design

Type CP CP From
18 Select from AERO3460: Aerospace Design 1
AERO4460: Aerospace Design 3
MECH2400: Mechanical Systems Design 1
12 Select from AERO1400: Intro to Aircraft Construction and Design
AERO3465: Aerospace Design 2
12 Select from AMME4111: Thesis A
AMME4112: Thesis B
6 Select from AERO5200: Advanced Aerodynamics
AERO5400: Advanced Aircraft Design Analysis


Note: Alternative units AMME5902 Computer Aided Manufacturing or AMME5912 Crash Analysis and Design may be selected from the free electives collection

Major in Space Engineering

Type CP CP From
6 Select from AERO1560: Introduction to Aerospace Engineering
18 Select from AERO2705: Space Engineering 1
AERO3760: Space Engineering 2
AERO4701: Space Engineering 3
12 Select from AMME4111: Thesis A
AMME4112: Thesis B
12 Select from Unit Block Space Specialist Units

Note: There are ATAR or WAM entry requirements for this major. To be eligible for this major, students are required to meet progression requirements.

5. Unit Blocks

Block 1 - Engineering General Electives (Max CP: 6)

Unit Code Unit Name CP Sessions Offered
ENGG1000 History and Philosophy of Engineering 6 Semester 1

Note: Students may take 6 credit points of free general electives to complete the total number of credit points for their degree. Students may take the following units of study as free general electives, provided they satisfy any prerequisite, quota, departmental permission or any other requirements of the units, and the units are not essentially the same or prohibited units for any of the other units in their degree.

(1) Any units of study from the Faculties of: (i) Engineering and Information Technologies (ii) Science (iii) Arts (iv) Sydney Business School

(2) Any other units of study approved by the Faculty of Engineering and Information Technologies Courses Committee, which will be published in an appropriate place by the Faculty.

(3) Any units of study approved by the Dean (or his/her delegate in these matters), or by the relevant Head of School or Program Director, on a case by case basis upon application by the student.

Block 2 - Aeronautical Specialist Electives (Min CP: 24,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
AERO1400 Intro to Aircraft Construction and Design 6 Semester 2
AERO2705 Space Engineering 1 6 Semester 2
AERO3465 Aerospace Design 2 6 Semester 2
AERO3760 Space Engineering 2 6 Semester 2
AERO4701 Space Engineering 3 6 Semester 1
AERO5200 Advanced Aerodynamics 6 Semester 1
AERO5206 Rotary Wing Aircraft 6 Semester 2
AERO5400 Advanced Aircraft Design Analysis 6 Semester 2
AERO5500 Flight Test and Evaluation 6 Semester 2
AERO5700 Space Engineering (Advanced) 6 Semester 1
Semester 2
AERO5750 Unmanned Air Vehicle Systems 6 Semester 2
AMME2000 Engineering Analysis 6 Semester 1
AMME3060 Engineering Methods 6 Semester 2
AMME5060 Advanced Computational Engineering 6 Semester 2
AMME5202 Computational Fluid Dynamics 6 Semester 1
AMME5292 Applied Fluid Dynamics and Turbulence 6 Semester 1
AMME5510 Vibration and Acoustics 6 Semester 2

Note: Space Engineering units AERO2705, AERO3760, AERO4701 are only available to students admitted to the Space Engineering major.

Block 3 - Aeronautical Advanced Specialist (Min CP: 12,Max CP: 18)

Unit Code Unit Name CP Sessions Offered
AERO5260 Aerodynamics 2 6 Semester 1
AERO5360 Aerospace Structures 2 6 Semester 1
AERO5560 Flight Mechanics 2 6 Semester 2

Note: At least two of these units (12 credit points) must be taken.

AERO4260, AERO4360 and AERO4560 have been recoded in 2025. Students who have not yet completed their Aeronautical Stream Advanced Specialist requirements should enrol in the 5000-level unit/s.

Block 4 - Space Specialist Units (Max CP: 12)

Unit Code Unit Name CP Sessions Offered
AERO4260 Aerodynamics 2 6 Semester 1
AERO4360 Aerospace Structures 2 6 Semester 1
AERO4560 Flight Mechanics 2 6 Semester 2
AERO5700 Space Engineering (Advanced) 6 Semester 1
Semester 2
AERO5750 Unmanned Air Vehicle Systems 6 Semester 2
AMME3060 Engineering Methods 6 Semester 2
AMME4710 Computer Vision and Image Processing 6 Semester 2
AMME5202 Computational Fluid Dynamics 6 Semester 1
AMME5510 Vibration and Acoustics 6 Semester 2
AMME5520 Advanced Control and Optimisation 6 Semester 1
AMME5790 Introduction to Biomechatronics 6 Semester 2
AMME5912 Crash Analysis and Design 6 Semester 1
MECH5265 Combustion 6 Semester 2
MECH5310 Advanced Engineering Materials 6 Semester 1
MECH5720 Sensors and Signals 6 Semester 2
MTRX5700 Experimental Robotics 6 Semester 1

Block 5 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
CHNG4203 Major Industrial Project 24 Semester 1
Semester 2
CHNG4811 Thesis A 6 Semester 1
Semester 2
CHNG4812 Thesis B 6 Semester 1
Semester 2
CIVL4022 Thesis A 6 Semester 1
Semester 2
CIVL4023 Thesis B 6 Semester 1
Semester 2
ELEC4712 Thesis A 6 Semester 1
Semester 2
ELEC4713 Thesis B 6 Semester 1
Semester 2
ELEC4714 Major Industrial Project 24 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4111 Integrated Engineering 4 2 Semester 1
ENGP1000 Professional Engagement Program 1 0 Semester 1
Semester 2
ENGP2000 Professional Engagement Program 2 0 Semester 1
Semester 2
ENGP3000 Professional Engagement Program 3 0 Semester 1
Semester 2
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream or major.

Block 6 - Aeronautical Stream Core (Min CP: 108,Max CP: 108)

Unit Code Unit Name CP Sessions Offered
AERO1560 Introduction to Aerospace Engineering 6 Semester 1
AERO2703 Aircraft Performance and Operations 6 Semester 2
AERO3260 Aerodynamics 1 6 Semester 2
AERO3261 Propulsion 6 Semester 1
AERO3360 Aerospace Structures 1 6 Semester 1
AERO3460 Aerospace Design 1 6 Semester 1
AERO3560 Flight Mechanics 1 6 Semester 2
AERO4460 Aerospace Design 3 6 Semester 1
AMME1362 Introduction to Engineering Materials 6 Semester 2
AMME1802 Engineering Mechanics 6 Semester 2
AMME2261 Fluid Mechanics 1 6 Semester 1
AMME2262 Introduction to Thermal Engineering 6 Semester 2
AMME2301 Mechanics of Solids 6 Semester 2
AMME2500 Engineering Dynamics 6 Semester 1
AMME2700 Instrumentation 6 Semester 1
AMME3500 System Dynamics and Control 6 Semester 1
ENGG1801 Engineering Computing 6 Semester 1
Int January
ENGG1810 Introduction to Engineering Computing 6 Semester 1
Semester 2
Int February
MECH2400 Mechanical Systems Design 1 6 Semester 1

Block 7 - Space Major Core (Max CP: 18)

Unit Code Unit Name CP Sessions Offered
AERO2705 Space Engineering 1 6 Semester 2
AERO3760 Space Engineering 2 6 Semester 2
AERO4701 Space Engineering 3 6 Semester 1

Note: These units are only available to students enrolled in the Space major. ATAR/WAM requirements apply.