Note: This course version is currently under review and is subject to change.

ProgramsEngENGI (UG)BEHons CombinedBE/BABE/BA to 2022Mechanical / Arts (2022 and earlier) (2017)


Show information forcommencing students (ie. started First Year then).
 


Print View | Download as PDF Administrative Information (Fees, ATAR etc.)

Select plan for Major/Pathway

Year 1 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
3MATH1001: Differential Calculus


Note:  This unit is discontinued from 2018. Replacement unit is MATH1021.
6Arts


Note:  The Arts component of the combined Mechanical Engineering/Arts degree requires a minimum of 84 credit points of Arts units of study, including at least 54 credit points at 2nd or 3rd year level, and the completion of an Arts major. Consult the Resolutions for the Combined Engineering/Arts degree in Faculty handbooks for further details.
6ENGG1801: Engineering Computing
3MATH1002: Linear Algebra
6MECH1560: Introduction to Mechanical Engineering

Note:   MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.


Year 1 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
3MATH1003: Integral Calculus and Modelling


Note:  This unit is discontinued from 2018. Replacement unit is MATH1023.
6Arts
6AMME1362: Introduction to Engineering Materials
6ENGG1802: Engineering Mechanics
3MATH1005: Statistical Thinking with Data

Note:   MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.


Year 2 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6AMME2000: Engineering Analysis
6Arts
6AMME2261: Fluid Mechanics 1
6AMME2500: Engineering Dynamics

Year 2 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6Arts
6AMME2262: Introduction to Thermal Engineering
6ENGG1111: Integrated Engineering 1
6AMME2301: Mechanics of Solids

Note:   ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students.

Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.


Year 3 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6MECH3362: Engineering Materials for Adv Manufacturing
6AMME3500: System Dynamics and Control
6AMME2700: Instrumentation
6Arts

Note:   Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.


Year 3 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
2ENGG2111: Integrated Engineering 2
12Select from
Arts
6MECH2400: Mechanical Systems Design 1
6MECH3361: Mechanics of Solids 2

Note:   ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv, with Faculty approval.


Year 4 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6MECH3660: Manufacturing Engineering
12Select from
Arts
2ENGG3111: Integrated Engineering 3
6MECH3261: Fluid Mechanics 2

Note:   ENGG3111 may be replaced by ENGG3062 Technology Education (Adv), with Faculty approval.

Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.


Year 4 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6MECH3260: Thermal Engineering and Environment
6MECH3460: Mechanical Systems Design 2
12Select from
Arts

Year 5 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
2ENGG4111: Integrated Engineering 4
6AMME4111: Thesis A
0ENGG4000: Practical Experience
12Select from
Arts
6Mechanical Specialist Electives


Note:  Students are required to complete 12 cp of Mechanical Specialist Electives

Note:   Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.


Year 5 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6AMME4112: Thesis B
6Arts
6Mechanical Specialist Electives


Note:  Students are required to complete 12 cp of Mechanical Specialist Electives

Additional Requirements for Major

TypeCPCP From
Core
6AERO2705: Space Engineering 1


Note:Replacing ENGG1111
Core
6AERO3760: Space Engineering 2


Note:Replacing MECH3460
Core
6AERO4701: Space Engineering 3
6Select from
Space Specialist Electives

Students are required to complete 24cp as per the table to be eligible of this major. There are minimum ATAR or WAM (>75%) entry requirements for enrolment in this major.

This Engineering major can be taken along with any of the available Arts majors.

48cp Majors

Type CP CP From
View complete Program Structure

Note: From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.

You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors

Major in Space Engineering (24cp)

Type CP CP From
Core
6 AERO2705: Space Engineering 1


Note: Replacing ENGG1111
Core
6 AERO3760: Space Engineering 2


Note: Replacing MECH3460
Core
6 AERO4701: Space Engineering 3
6 Select from Unit Block Space Specialist Electives
View complete Program Structure

Note: Students are required to complete 24cp as per the table to be eligible of this major. There are minimum ATAR or WAM (>75%) entry requirements for enrolment in this major.

This Engineering major can be taken along with any of the available Arts majors.

Block 1 - Arts (Min CP: 84,Max CP: 84)

Note: For the Bachelor of Arts component, students are required to complete a total of 84 credit points of Table A units as listed in the handbook of the Faculty of Arts and Social Sciences, including a major from Table A and a minimum 54 credit points of 2000/3000 level units of study. See Faculty handbook at http://sydney.edu.au/handbooks

Block 2 - Mechanical Specialist Electives (Min CP: 12,Max CP: 12)

Unit Code Unit Name CP Sessions Offered
AMME5101 Energy and the Environment 6 Semester 1
AMME5105 Risk Management Analysis 6 Semester 1
AMME5202 Computational Fluid Dynamics 6 Semester 1
AMME5520 Advanced Control and Optimisation 6 Semester 1
AMME5902 Computer Aided Manufacturing 6 Semester 2
MECH4460 Design of Micro- and Nanosystems 6 Semester 1
MECH4660 Engineering Management [not running in 2019] 6 Semester 1
MECH4961 Biomechanics and Biomaterials 6 Semester 2
MECH5255 Air Conditioning and Refrigeration 6 Semester 2
MECH5265 Combustion 6 Semester 2
MECH5304 Materials Failure 6 Semester 2
MECH5305 Smart Materials 6 Semester 2
MECH5310 Advanced Engineering Materials 6 Semester 1

Block 3 - Space Specialist Electives (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
AERO5700 Space Engineering (Advanced) 6 Semester 1
Semester 2
AMME5101 Energy and the Environment 6 Semester 1
AMME5202 Computational Fluid Dynamics 6 Semester 1
AMME5520 Advanced Control and Optimisation 6 Semester 1
MECH4460 Design of Micro- and Nanosystems 6 Semester 1
MECH4961 Biomechanics and Biomaterials 6 Semester 2
MECH5255 Air Conditioning and Refrigeration 6 Semester 2
MECH5265 Combustion 6 Semester 2
MECH5310 Advanced Engineering Materials 6 Semester 1

Block 4 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4000 Practical Experience 0 Int January
Int February
Int March
Int April
Int May
Int June
Int July
Int August
Int September
Int October
Int November
Int December
ENGG4111 Integrated Engineering 4 2 Semester 1
MATH1001 Differential Calculus 3 Semester 1
Summer Main
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1003 Integral Calculus and Modelling 3 Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January

Block 5 - Mechanical Stream Core (Min CP: 108,Max CP: 108)

Unit Code Unit Name CP Sessions Offered
AMME1362 Introduction to Engineering Materials 6 Semester 2
AMME2000 Engineering Analysis 6 Semester 1
AMME2261 Fluid Mechanics 1 6 Semester 1
AMME2262 Introduction to Thermal Engineering 6 Semester 2
AMME2301 Mechanics of Solids 6 Semester 2
AMME2500 Engineering Dynamics 6 Semester 1
AMME2700 Instrumentation 6 Semester 1
AMME3500 System Dynamics and Control 6 Semester 1
ENGG1801 Engineering Computing 6 Semester 1
Int January
ENGG1802 Engineering Mechanics 6 Semester 2
Summer Main
Int January
MECH1560 Introduction to Mechanical Engineering 6 Semester 1
MECH2400 Mechanical Systems Design 1 6 Semester 1
MECH3260 Thermal Engineering and Environment 6 Semester 2
MECH3261 Fluid Mechanics 2 6 Semester 1
MECH3361 Mechanics of Solids 2 6 Semester 2
MECH3362 Engineering Materials for Adv Manufacturing 6 Semester 1
MECH3460 Mechanical Systems Design 2 6 Semester 2
MECH3660 Manufacturing Engineering 6 Semester 1
Course: Mechanical / Arts (2022 and earlier) (2017)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: N/A
Faculty/School: Faculty of Engineering
Years Offered: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015
Requirements: In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (156 credit points):

► 36 credit points of Engineering core units

► 108 credit points of Mechanical stream core units

► 12 credit points of Mechanical Specialist elective units

Arts:

► 84 credit points of Arts units

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering

For the Bachelor of Engineering component of a combined degree:

(a) The units of study that may be taken for the Bachelor of Engineering component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering single degree;

(b) Except where approved, all candidates must complete a minimum of 144 credit points comprising:

(i) 36cp from the Engineering Core Table, including all required units;

(ii) 108cp from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Candidates who do not meet the requirements for the award of the Bachelor of Engineering Honours but who have otherwise satisfied the requirements of the Bachelor of Engineering shall graduate with the Bachelor of Engineering pass degree.

Requirements for the Bachelor of Arts

For the Bachelor of Arts component of a combined degree:

(a) The units of study that may be taken are set out in Table A from the Faculty of Arts and Social Sciences Tables of units of study.

(b) Candidates must complete a total of 84 credit points from Table A, including:

(i) a major from Table A

(ii) a minimum of 54 credit points of 2000/3000 level units of study.

Candidates for the award of the Bachelor of Arts (Honours) who do not meet the requirements, and who have not already graduated, will be awarded the Bachelor of Arts pass degree.

Engineering Honours requirements

(a) an EWAM of at least 65 immediately prior to the semester in which a thesis unit of study is first attempted; and

(b) have an EIHWAM of at least 65 at the completion of the degree; and

(c) complete the requirements within a time limit of 5 years for a single Bachelor of Engineering Honours degree or complete the requirements within a time limit of 6 years for a combined Bachelor of Engineering Honours combined degree.

Candidates who satisfy the requirements for the Engineering degree, but who have not satisfied each of Clauses (a), (b) and (c), will qualify for the award of the Bachelor of Engineering degree (i.e. the PASS degree, awarded without Honours).

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/
Report Type: