Note: This course version is currently under review and is subject to change.

ProgramsEngENGI (UG)BEHons CombinedBE/BScBE/BScS1 EntryMechanical / Science (2018)


Show information forcommencing students (ie. started First Year then).
 
Faculty of Engineeringengineering.undergraduate@sydney.edu.au


Print View | Download as PDF Administrative Information (Fees, ATAR etc.)

Select plan for Major/Pathway

Year 1 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6ENGG1801: Engineering Computing


Note:  Combined degree students wishing to major in Computer Science can replace ENGG1801 with INFO1103.
3MATH1021: Calculus of One Variable
3MATH1002: Linear Algebra
6MECH1560: Introduction to Mechanical Engineering
6Science Units
0ENGP1000: Professional Engagement Program 1


Note:  All students must enrol in ENGP1000 in their first semester of enrolment.

New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note:   From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024


Year 1 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6Science Units
3MATH1023: Multivariable Calculus and Modelling
6AMME1362: Introduction to Engineering Materials
6ENGG1802: Engineering Mechanics
3MATH1005: Statistical Thinking with Data

Note:   From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024


Year 2 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6Science Units
6AMME2000: Engineering Analysis
6AMME2261: Fluid Mechanics 1
6AMME2500: Engineering Dynamics

Year 2 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6Science Units
6ENGG1111: Integrated Engineering 1
6AMME2301: Mechanics of Solids
0ENGP2000: Professional Engagement Program 2


Note:  New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes
6MECH2400: Mechanical Systems Design 1


Note:  From 2024, MECH2400 is offered in Semester 1 only. Students who have not completed MECH2400 should discuss an enrolment plan with their Academic Advisor.

Note:   Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.


Year 3 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6Science Units
6MECH3362: Engineering Materials for Adv Manufacturing
6AMME3500: System Dynamics and Control
6AMME2700: Instrumentation


Note:  AMME2700 is discontinued. Students who have not yet completed this unit should take AMME1705 in its place.

Year 3 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
12Select from
Science Units
2ENGG2111: Integrated Engineering 2
6AMME2262: Introduction to Thermal Engineering
6MECH3361: Mechanics of Solids 2

Note:   Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.


Year 4 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
12Select from
Science Units
2ENGG3111: Integrated Engineering 3
6MECH3261: Fluid Mechanics 2
6MECH3660: Manufacturing Engineering

Note:   Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.


Year 4 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
12Select from
Science Units
6MECH3460: Mechanical Systems Design 2
6MECH3260: Thermal Engineering and Environment

Year 5 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
2ENGG4111: Integrated Engineering 4
12Select from
Science Units
List
6Select from
Mechanical Specialist Electives
Science Units


Note:  As there are 12cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 12cp of electives from either Engineering or Science, or a combination of both.

Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
6AMME4111: Thesis A
0ENGP3000: Professional Engagement Program 3


Note:  New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note:   Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.


Year 5 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6Science Units
List
6Select from
Mechanical Specialist Electives
Science Units


Note:  As there are 12cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 12cp of electives from either Engineering or Science, or a combination of both.

Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
6AMME4112: Thesis B

Additional Requirements for Major

TypeCPCP From
Core
6AERO2705: Space Engineering 1


Note:Replacing ENGG1111
Core
6AERO3760: Space Engineering 2


Note:Replacing MECH3460
Core
6AERO4701: Space Engineering 3
6Select from
Space Specialist Electives


Course: Mechanical / Science (2018)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: 5.00 Years
Faculty/School: Faculty of Engineering
Years Offered: 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015
Requirements: Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units (12cp of MATH1* can count towards Science requirements)

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of Mechanical Stream core units

► Up to 12 credit points of Mechanical Specialist elective units

Science:

► 96 credit points of Science units

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Science

For the Bachelor of Science component of a combined degree:

(a) The units of study that may be taken are set out in Table A of the Faculty of Science, and Table S and Table O of the Shared Pool for Undergraduate Degrees.

(b) Candidates must complete 96 credit points in the Bachelor of Science including:

(i) any required degree core units as set out in Table A of the Faculty of Science; and

(ii) a major (48 credit points) or a 3-year program with an embedded major from Table A of the Faculty of Science; and

(iii) 12 credit points of units of study in the Open Learning Environment as listed in Table O; and

(iv) where appropriate, additional electives from Table A of the Faculty of Science or Table S;

(v) If enrolled in a stream, complete the requirements for the stream as specified in Table A of the Faculty of Science.

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/
Report Type: