Note: This course version is currently under review and is subject to change.
ProgramsEngENGI (PG)MPE/MPEAMPE(Accel)MPE(Accel) to 2024Master of Professional Engineering (Accelerated) (Mechanical) (2019)
Show information forcommencing students (ie. started First Year then).
Print View | Download as PDF Administrative Information (Fees, ATAR etc.)
Year 1 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
Core | 6 | AMME8501: System Dynamics and Control |
Core | 6 | MECH8261: Fluid Mechanics 2 |
Core | 6 | MECH8362: Engineering Materials for Adv Manufacturing |
Core | 6 | MECH8660: Manufacturing and Sustainability |
Year 1 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
Core | 6 | MECH8260: Thermal Engineering and Environment |
Core | 6 | MECH8361: Mechanics of Solids 2 |
| 6 | Mechanical Engineering Recommended Electives Note: These electives provide an opportunity for advanced study in either Thermofluids, Materials, Design & Manufacturing or Mechatronics. It is recommended that students select units from the same subject area in order to optimise their learning experiences. | |
| 6 | Mechanical Engineering Recommended Electives |
Year 2 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
Core | 6 | AMME5020: Capstone Project A Note: Students achieving an average mark of 75% or higher over 48 credit points of units of study in the Year Two Table or equivalent are eligible for the Research Pathway and may replace AMME5020 and 6 credits of elective with AMME5222 Dissertation A |
Core | 0 | ENGG5217: Practical Experience |
Core | 6 | AMME9601: Professional Engineering |
| 6 | Mechanical Engineering Recommended Electives Note: It is recommended that students select units from the same subject area (either Thermofluids, Materials, Design & Manufacturing or Mechatronics) in order to optimise their learning experiences. | |
| 6 | Mechanical Engineering Recommended Electives |
Note: Candidates undertaking the Major Industrial Project take AMME5010 in place of ENGG5217 Practical Experience, AMME5020/5021 Capstone Project A & B and 12 credit points of Specialist Elective units of study.
Year 2 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
Core | 6 | AMME5021: Capstone Project B Note: Students achieving an average mark of 75% or higher over 48 credit points of units of study in the Year Two Table or equivalent are eligible for the Research Pathway and may replace AMME5021 and 6 credits of elective with AMME5223 Dissertation B |
Core | 6 | ENGG5103: Safety Systems and Risk Analysis |
| 6 | Mechanical Engineering Recommended Electives Note: It is recommended that students select units from the same subject area (either Thermofluids, Materials, Design & Manufacturing or Mechatronics) in order to optimise their learning experiences. | |
| 6 | Mechanical Engineering Recommended Electives |
Note: Candidates undertaking the Major Industrial Project take AMME5010 in place of ENGG5217 Practical Experience, AMME5020/5021 Capstone Project A & B and 12 credit points of Specialist Elective units of study.
Requirements for this Pathway
| Type | CP | CP From |
Core | 12 | AMME5222: Dissertation A Note:Students achieving an average mark of 75% or higher over 48 credit points of units of study or equivalent are eligible for the Research Pathway. AMME5222 replaces AMME5020 and a 6cp elective unit. |
Core | 12 | AMME5223: Dissertation B Note:Students achieving an average mark of 75% or higher over 48 credit points of units of study or equivalent are eligible for the Research Pathway. AMME5223 replaces AMME5021 and a 6cp elective unit. |
Research pathway students take Dissertation units AMME5222 and AMME5223 (total 24 cp) in place of Capstone Project units and 12 cp of elective units.
Extended Capstone Project
| Type | CP | CP From |
Core
|
12 |
AMME5022: Capstone Project B Extended Note: Students achieving an average mark of 70% or higher over 48 credit points of units of study are eligible for the Extended Capstone Project. AMME5022 replaces AMME5021 and a 6cp elective unit. |
| View complete Program Structure | ||
Note: Students take Capstone Project units AMME5020 and AMME5022 (total 18 cp) in place of Capstone Project AMME5020/AMME5021 and 6 cp of elective units.
MIPP Pathway (Major Industrial Project Placement)
| Type | CP | CP From |
Core
|
24 |
AMME5010: Major Industrial Project |
| View complete Program Structure | ||
Note: Candidates undertaking the Major Industrial Project take AMME5010 in place of ENGG5217 Practical Experience, AMME5020/5021 Capstone Project A & B and 12 credit points of Specialist Elective units of study.
Research Pathway
| Type | CP | CP From |
Core
|
12 |
AMME5222: Dissertation A Note: Students achieving an average mark of 75% or higher over 48 credit points of units of study or equivalent are eligible for the Research Pathway. AMME5222 replaces AMME5020 and a 6cp elective unit. |
Core
|
12 |
AMME5223: Dissertation B Note: Students achieving an average mark of 75% or higher over 48 credit points of units of study or equivalent are eligible for the Research Pathway. AMME5223 replaces AMME5021 and a 6cp elective unit. |
| View complete Program Structure | ||
Note: Research pathway students take Dissertation units AMME5222 and AMME5223 (total 24 cp) in place of Capstone Project units and 12 cp of elective units.
Student Industrial Placement Scheme Pathway
| Type | CP | CP From |
Core
|
24 |
AMME5010: Major Industrial Project Note: Candidates undertaking the Major Industrial Project take AMME5010 in place of ENGG5217 Practical Experience, AMME5020/5021 Capstone Project A & B and 12 credit points of Specialist Elective units of study. |
| View complete Program Structure | ||
Block 1 - Mechanical Engineering Recommended Electives (Min CP: 36,Max CP: 36)
Note: These electives provide an opportunity for advanced study in either Thermofluids, Materials, Design & Manufacturing or Mechatronics. It is recommended that students select units from the same subject area in order to optimise their learning experiences. Six units (36 credit points) are required.
Block 2 - Exchange Units (Max CP: 12)
| Unit Code | Unit Name | CP | Sessions Offered |
| ENGG5231 | Engineering Graduate Exchange A | 6 |
Int January Int July |
| ENGG5232 | Engineering Graduate Exchange B | 6 |
Int January Int July |
Note: Summer/Winter Exchange units require the approval of the Program Director. With approval, up to 12 credit points of Exchange units may taken in place of other units, towards the requirements of the degree.
| Course: | Master of Professional Engineering (Accelerated) (Mechanical) (2019) |
| CP Required: | 96 |
| Min FT Duration: | 2.00 Years |
| Min PT Duration: | N/A |
| Faculty/School: | Faculty of Engineering |
| Years Offered: | 2024, 2023, 2022, 2021, 2020, 2019 |
| Requirements: | To qualify for the award of the Master of Professional Engineering in this specialisation, a candidate must complete 96 credit points, including core and elective units of study as listed here. Admission to candidature Admission to candidature requires: EITHER (a) a Bachelor of Engineering from the University of Sydney, OR (b) equivalent qualification, with a minimum credit average; OR (c) a non-engineering bachelor's degree with a minimum credit average, with studies equivalent to 48 credit points in mathematics, physics, chemistry, biology, geology, computing or statistics, as related to the intended engineering specialisation. All candidates for admission must have prior learning equivalent to 48 credit points in total, which, in the estimation of the Dean, is comparable to the requirements for the first year of a Bachelor of Engineering at this University in the stream sought for admission. Credit for previous study Candidates with a Bachelor of Engineering or equivalent in the relevant discipline, and who have reached an acceptable level of academic achievement in their prior degree, may be eligible for a reduction of volume in learning of up to 48 credit points. A maximum of 72 credit points may be granted towards the Master of Professional Engineering from external postgraduate studies where no award has been, or will be made, provided the studies are acceptable to the Program Director Dean and are equivalent to units of study offered in the Master of Professional Engineering. Candidates transferring from the Master of Engineering to the Master of Professional Engineering may transfer up to 24 credit points provided units are equivalent to units of study offered in the Master of Professional Engineering. Any additional credit is subject to the approval by the Dean. Progression Candidates are required to meet the progression requirements as specified in the University's Coursework Rule. Course resolutions This course is administered under course resolutions published in the Faculty Handbook at http://sydney.edu.au/handbooks/ |
