|
Faculty of Engineering |
|
|
Faculty of Engineering |
| Course: | Mechanical / Science (2015) |
| CP Required: | 240 |
| Min FT Duration: | 5.00 Years |
| Min PT Duration: | 5.00 Years |
| Faculty/School: | Faculty of Engineering |
| Years Offered: | 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015 |
| Type | CP | CP From |
Core
|
6 |
ENGG1801: Engineering Computing Note: Combined degree students wishing to major in Computer Science can replace ENGG1801 with INFO1103. INFO1103 is discontinued from 2018. Replacement unit is INFO1110. |
Core
|
3 |
MATH1001: Differential Calculus Note: This unit is discontinued from 2018. Replacement unit is MATH1021. |
Core
|
3 |
MATH1002: Linear Algebra |
Core
|
6 |
MECH1560: Introduction to Mechanical Engineering |
| 6 |
Select from
Unit Block: Selected Junior Science Units Note: Science/Engineering(Hons) combined degrees require 240 credit points, comprising 96 credit points from Science subject areas, with a major in one Science discipline, plus units prescribed for the Engineering specialisation. Science units forming part of core requirements in the Mechanical Engineering specialisation may be counted as part of the 96 credit point Science requirement. Consult resolutions for Combined Engineering(Hons) /Science degree in Faculty handbooks for further details. |
| Type | CP | CP From |
Core
|
6 |
AMME1362: Introduction to Engineering Materials |
Core
|
6 |
ENGG1802: Engineering Mechanics |
Core
|
3 |
MATH1003: Integral Calculus and Modelling Note: This unit is discontinued from 2018. Replacement unit is MATH1023. |
Core
|
3 |
MATH1005: Statistical Thinking with Data |
| 6 |
Select from
Unit Block: Selected Junior Science Units |
| Type | CP | CP From |
Core
|
6 |
AMME2261: Fluid Mechanics 1 |
Core
|
6 |
AMME2500: Engineering Dynamics |
Core
|
6 |
MATH2067: DEs and Vector Calculus for Engineers Note: MATH2067 can be replaced by MATH2061 and MATH2065 to meet requirements of BSc major. |
List
|
6 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units |
| Type | CP | CP From |
Core
|
6 |
AMME2301: Mechanics of Solids |
Core
|
6 |
MECH2400: Mechanical Systems Design 1 |
List
|
12 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units |
| Type | CP | CP From |
Core
|
6 |
AMME2700: Instrumentation |
Core
|
6 |
AMME3500: System Dynamics and Control |
Core
|
6 |
MECH3362: Engineering Materials for Adv Manufacturing |
List
|
6 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units |
| Type | CP | CP From |
Core
|
6 |
AMME2262: Introduction to Thermal Engineering |
Core
|
6 |
MECH3361: Mechanics of Solids 2 |
List
|
12 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units |
| Type | CP | CP From |
Core
|
6 |
MECH3261: Fluid Mechanics 2 |
Core
|
6 |
MECH3660: Manufacturing Engineering |
List
|
12 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units |
| Type | CP | CP From |
Core
|
6 |
MECH3260: Thermal Engineering and Environment |
Core
|
6 |
MECH3460: Mechanical Systems Design 2 |
List
|
12 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units |
| Type | CP | CP From |
Core
|
6 |
AMME4111: Thesis A |
Core
|
0 |
ENGG4000: Practical Experience |
List
|
12 |
Select from
Unit Blocks: Mechanical Electives Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units or other units. Note: Combined BE(Mech)(Hons)/BSc students are required to complete a minimum of 12 cp of recommended Mechanical electives. These may be taken in either first or second semester. |
| 6 |
Select from
MECH4460: Design of Micro- and Nanosystems MECH4601: Professional Engineering 2 |
| Type | CP | CP From |
Core
|
6 |
AMME4112: Thesis B |
List
|
18 |
Select from
Unit Blocks: Mechanical Electives Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units or other units. Note: Combined BE(Mech)(Hons)/BSc students are required to complete a minimum of 12 cp of recommended Mechanical electives. These may be taken in either first or second semester. |
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME5101 | Energy and the Environment | 6 |
Semester 1 |
| AMME5105 | Risk Management Analysis | 6 |
Semester 1 |
| AMME5202 | Computational Fluid Dynamics | 6 |
Semester 1 |
| AMME5271 | Computational Nanotechnology | 6 |
Semester 2 |
| AMME5310 | Engineering Tribology | 6 |
Semester 1 |
| AMME5510 | Vibration and Acoustics | 6 |
Semester 2 |
| AMME5520 | Advanced Control and Optimisation | 6 |
Semester 1 |
| AMME5912 | Crash Analysis and Design | 6 |
Semester 1 |
| MECH4460 | Design of Micro- and Nanosystems | 6 |
Semester 1 |
| MECH4660 | Engineering Management [not running in 2019] | 6 |
Semester 1 |
| MECH5255 | Air Conditioning and Refrigeration | 6 |
Semester 2 |
| MECH5265 | Combustion | 6 |
Semester 2 |
| MECH5275 | Renewable Energy | 6 |
Semester 2 |
| MECH5310 | Advanced Engineering Materials | 6 |
Semester 1 |
Note: This information is correct as of 2015. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.
Note: This information is correct as of 2015. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.
Note:
A total of 96 credits of Science or IT subject units, including a Science major sequence, must be completed as part of the combined Engineering/Science degree. Science units forming part of core requirements in the chosen engineering specialisation may be counted as part of the 96 credit point Science requirements. Consult resolutions for Combined Engineering /Science degree in Faculty handbooks for further details.
This information is correct as of 2015. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.
| Unit Code | Unit Name | CP | Sessions Offered |
| MECH4460 | Design of Micro- and Nanosystems | 6 |
Semester 1 |
| MECH4601 | Professional Engineering 2 | 6 |
Semester 1 |