2. Requirements

In summary the requirements are:

Students must complete 288 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units

► 108 credit points of Chemical stream core units

Laws:

► 144 credit points of Laws core units

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For the Bachelor of Engineering and Bachelor of Laws combined degree, a candidate must complete 288 credit points and any additional requirements specified in the following clauses.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering

For the Bachelor of Engineering component of a combined degree:

(a) The units of study that may be taken for the Bachelor of Engineering component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering single degree;

(b) Except where approved, all candidates must complete a minimum of 144 credit points comprising:

(i) 36cp from the Engineering Core Table, including all required units;

(ii) 108cp from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Laws

For the Bachelor of Laws component of a combined degree:

(a) The units of study that may be taken are set out in the Faculty of Law Undergraduate Table.

(b) Candidates must complete 144 credit points of Law units of study taken from the Faculty of Law Undergraduate Table, comprising:

(i) 102 credit points of compulsory units of study; and

(ii) 42 credit points of elective units of study, of which a maximum of 36 credit points are taken from Part 1 and a minimum of 6 credit points are taken from Part 2.

The Bachelor of Laws can be awarded in the grades of either Pass or Honours. Honours in the Bachelor of Laws is awarded in First Class or Second Class in accordance with the resolutions of the Bachelor of Laws.

Engineering Honours Requirements

(a) an EWAM of at least 65 immediately prior to the semester in which a thesis unit of study is first attempted; and

(b) have an EIHWAM of at least 65 at the completion of the degree; and

(c) complete the requirements within a time limit of 5 years for a single Bachelor of Engineering Honours degree or complete the requirements within a time limit of 6 years for a combined Bachelor of Engineering Honours combined degree.

Candidates who satisfy the requirements for the Engineering degree, but who have not satisfied each of Clauses (a), (b) and (c), will qualify for the award of the Bachelor of Engineering degree (i.e. the PASS degree, awarded without Honours).

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type	CP	CP From
Engineering Core	3	Select from MATH1001: Differential Calculus Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1021.
CBE Core	6	Select from CHEM1101: Chemistry 1A Note: This unit is discontinued from 2018. Replacement unit is CHEM1111.
Engineering Core	3	Select from MATH1002: Linear Algebra
CBE Core	6	Select from ENGG1801: Engineering Computing
Laws Core	6	Select from LAWS1006: Foundations of Law

Note: MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.

Year 1 - Semester 2

Type	CP	CP From
CBE Core	6	Select from CHEM1102: Chemistry 1B Note: This unit is discontinued from 2018. Replacement unit is CHEM1112.
Engineering Core	3	Select from MATH1003: Integral Calculus and Modelling Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1023.
CBE Core	6	Select from CHNG1103: Conservation of Mass and Energy
Engineering Core	6	Select from ENGG1111: Integrated Engineering 1
Engineering Core	3	Select from MATH1005: Statistical Thinking with Data
Laws Core	0	Select from LAWS1013: Legal Research 1

Note: ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students. MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.

Year 2 - Semester 1

Type	CP	CP From
CBE Core	6	Select from CHNG2801: Fluid Mechanics
CBE Core	6	Select from CHNG2802: Chemical Engineering Modelling and Analysis
CBE Core	6	Select from CHNG2803: Heat and Mass Transfer

Year 2 - Semester 2

Type	CP	CP From
Engineering Core	2	Select from ENGG2111: Integrated Engineering 2
CBE Core	6	Select from CHNG2804: Chemical Engineering Thermodynamics
CBE Core	6	Select from CHNG2805: Engineering for a Sustainable Society
CBE Core	6	Select from CHNG2806: Separation Processes
Laws Core	6	Select from LAWS1012: Torts

Note: ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv, with Faculty approval.

Year 3 - Semester 1

Type	CP	CP From
CBE Core	6	Select from CHNG3802: Process Dynamics and Control
CBE Core	6	Select from CHNG3803: Reaction Engineering
CBE Core	6	Select from CHNG3805: Particle Processing
Laws Core	6	Select from LAWS1014: Civil and Criminal Procedure

Year 3 - Semester 2

Type	CP	CP From
CBE Core	6	Select from CHNG3806: Risk Management for Chemical Engineering
CBE Core	6	Select from CHNG3807: Products and Value Chains [not running in 2020]
CBE Core	6	Select from CHNG3801: Process Plant Design
Laws Core	6	Select from LAWS1016: Criminal Law

Year 4 - Semester 1

Type	CP	CP From
Engineering Core	6	Select from CHNG4811: Thesis A
Engineering Core	2	Select from ENGG3111: Integrated Engineering 3
Engineering Core	0	Select from ENGG4000: Practical Experience
CBE Core	6	Select from CHNG4802: Chemical Engineering Design A
Laws Core	6	Select from LAWS1023: Public International Law
Laws Core	6	Select from LAWS1015: Contracts

Note: ENGG3111 may be replaced by ENGG3062 Technology Education (Adv), with Faculty approval.

Year 4 - Semester 2

Type	CP	CP From
Engineering Core	6	Select from CHNG4812: Thesis B
CBE Core	6	Select from CHNG4806: Chemical Engineering Design B
Laws Core	6	Select from LAWS1017: Torts and Contracts II
Laws Core	0	Select from LAWS1019: Legal Research II
Laws Core	6	Select from LAWS1021: Public Law

Year 5 - Semester 1

Type	CP	CP From
Engineering Core	2	Select from ENGG4111: Integrated Engineering 4
Laws Core	6	Select from LAWS2010: Administrative Law
Laws Core	6	Select from LAWS2011: Federal Constitutional Law
Laws Core	6	Select from LAWS2012: Intro to Property and Commercial Law
Laws Core	6	Select from LAWS2013: The Legal Profession

Note: ENGG4111 may be replaced by ENGG4064/5 Advanced Engineering Design A/B, with Faculty approval.

Year 5 - Semester 2

Type	CP	CP From
Laws Core	6	Select from LAWS2014: Corporations Law
Laws Core	6	Select from LAWS2015: Equity
Laws Core	6	Select from LAWS2016: Evidence
Laws Core	6	Select from LAWS2017: Real Property

Year 6 - Semester 1

Type	CP	CP From
Laws Core	6	Select from LAWS2018: Private International Law A
Law Electives	18	Select from Unit Block: Law Electives

Note: In year 6 students are required to complete LAWS2018 Private International Law A 42 credit points of elective units of study, of which a maximum of 36 credit points are taken from Part 1 and a minimum of 6 credit points are taken from Part 2. See Law Faculty Handbook for more details: http://sydney.edu.au/handbooks/law/

LAWS2018 may be taken in Semester 1 or Semester 2. Students who commenced the Combined Law program before 2011 do not need to complete LAWS2018 but must complete 48 credit points of elective units of study rather than 42 credit points.

Year 6 - Semester 2

Type	CP	CP From
Law Electives	24	Select from Unit Block: Law Electives

4. Pathways

Alternate Thesis Pathway : Major Industrial Project Placement Scheme (MIPPS)

Type	CP	CP From
Core	24	CHNG4203: Major Industrial Project

Note: MIPPS students take CHNG4203 Major Industrial Project Placement (24 credit points). This unit replaces regular Honours Thesis units (CHNG4811 and CHNG4812) along with CHNG4001 Practical Experience, CHNG4112 Foundation of Chemical Engineering Design A and 6 credit points of electives. Students are admitted to MIPPS by school permission only. Applications are taken in third year of study.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code	Unit Name	CP	Sessions Offered
AERO2711	Aerospace Engineering Project 1	6	Semester 1 Semester 2 Int February Int July
AERO3711	Aerospace Engineering Project 2	6	Semester 1 Semester 2 Int February Int July
AERO4711	Aerospace Engineering Project 3	6	Semester 1 Semester 2 Int February Int July
AMME4010	Major Industrial Project	24	Semester 1 Semester 2
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
CHNG4203	Major Industrial Project	24	Semester 1 Semester 2
CHNG4811	Thesis A	6	Semester 1 Semester 2
CHNG4812	Thesis B	6	Semester 1 Semester 2
CIVL4022	Thesis A	6	Semester 1 Semester 2
CIVL4023	Thesis B	6	Semester 1 Semester 2
ELEC4712	Thesis A	6	Semester 1 Semester 2
ELEC4713	Thesis B	6	Semester 1 Semester 2
ELEC4714	Major Industrial Project	24	Semester 1 Semester 2
ENGG1061	Advanced Engineering 1	6	Semester 1 Semester 2
ENGG1111	Integrated Engineering 1	6	Semester 1
ENGG2062	Engineering Project: Business Plan 2 Adv	6	Semester 2
ENGG2111	Integrated Engineering 2	2	Semester 1 Semester 2 Int February
ENGG3062	Technology Education (Advanced)	6	Semester 2
ENGG3111	Integrated Engineering 3	2	Semester 1 Semester 2
ENGG4000	Practical Experience	0	Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December
ENGG4064	Advanced Engineering Design A	6	Semester 2 Int July
ENGG4065	Advanced Engineering Design B	6	Semester 2
ENGG4111	Integrated Engineering 4	2	Semester 1
MATH1001	Differential Calculus	3	Semester 1 Summer Main
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1003	Integral Calculus and Modelling	3	Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1901	Differential Calculus (Advanced)	3	Semester 1
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1903	Integral Calculus and Modelling Advanced	3	Semester 2
MATH1905	Statistics (Advanced)	3	Semester 2

Note: Complete a minimum of 36cp including:

- ENGG4000 Practical Experience (0cp)

- Exactly 6cp from ENGG1111 Integrated Engineering 1 (6cp) OR ENGG1061 Advanced Engineering 1A (6cp) (see note 1)

- At least 2cp from ENGG2xxx Integrated Engineering 2 (2cp) OR ENGG2062 Engineering Project Business Plan 2 Adv (6cp) (see note 1) OR AERO2711 Aerospace Engineering Project 1 (see note 1)

- At least 2cp from ENGG3xxx Integrated Engineering 3 (2cp) OR ENGG3062 Technology Education (Advanced) (6cp) (see note 1) OR AERO3711 Advanced Aerospace Project 2 (see note 1)

- At least 2cp from ENGG4xxx Integrated Engineering 4 (2cp) OR ENGG4064 Advanced Engineering Design A (6cp) (see note 1) OR ENGG4065 Advanced Engineering Design B (6cp) (see note 1) OR AERO4711 Advanced Aerospace Project 3 (see note 1)

- Exactly 12cp of MATH1xxxx units: MATH1001 Differential Calculus (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1003 Integral Calculus AND Modelling (3cp) MATH1005 Statistics (3cp)

- A minimum of 12cp of (see notes 2,3) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 hesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. The Advanced Engineering units are only available to students who have been accepted into the relevant year of the Advanced Engineering program.

Note 2. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 2 - CBE Core (Min CP: 108,Max CP: 108)

Unit Code	Unit Name	CP	Sessions Offered
CHEM1101	Chemistry 1A	6	Semester 1 Semester 2 Summer Main
CHEM1102	Chemistry 1B	6	Semester 1 Semester 2 Summer Main
CHNG1103	Conservation of Mass and Energy	6	Semester 2
CHNG2801	Fluid Mechanics	6	Semester 1
CHNG2802	Chemical Engineering Modelling and Analysis	6	Semester 1
CHNG2803	Heat and Mass Transfer	6	Semester 1
CHNG2804	Chemical Engineering Thermodynamics	6	Semester 2
CHNG2805	Engineering for a Sustainable Society	6	Semester 2
CHNG2806	Separation Processes	6	Semester 2
CHNG3801	Process Plant Design	6	Semester 2
CHNG3802	Process Dynamics and Control	6	Semester 1
CHNG3803	Reaction Engineering	6	Semester 1
CHNG3805	Particle Processing	6	Semester 1
CHNG3806	Risk Management for Chemical Engineering	6	Semester 2
CHNG3807	Products and Value Chains [not running in 2020]	6	Semester 2
CHNG4802	Chemical Engineering Design A	6	Semester 1
CHNG4806	Chemical Engineering Design B	6	Semester 2
ENGG1801	Engineering Computing	6	Semester 1 Int January

Block 3 - Laws Core (Min CP: 102,Max CP: 102)

Unit Code	Unit Name	CP	Sessions Offered
LAWS1006	Foundations of Law	6	Semester 1
LAWS1012	Torts	6	Semester 2 S1 Intensive
LAWS1013	Legal Research 1	0	Semester 1 Semester 2
LAWS1014	Civil and Criminal Procedure	6	Semester 1
LAWS1015	Contracts	6	Semester 1 Semester 2 Summer Early
LAWS1016	Criminal Law	6	Semester 1 Semester 2
LAWS1017	Torts and Contracts II	6	Semester 1 Semester 2 Winter Main
LAWS1019	Legal Research II	0	Semester 1 Semester 2
LAWS1021	Public Law	6	Semester 2 Int February
LAWS1023	Public International Law	6	Semester 1 Semester 2
LAWS2010	Administrative Law	6	Semester 1
LAWS2011	Federal Constitutional Law	6	Semester 1
LAWS2012	Intro to Property and Commercial Law	6	Semester 1
LAWS2013	The Legal Profession	6	Semester 1
LAWS2014	Corporations Law	6	Semester 2 Winter Main
LAWS2015	Equity	6	Semester 2 Summer Main
LAWS2016	Evidence	6	Semester 2 Summer Early
LAWS2017	Real Property	6	Semester 2 Winter Main
LAWS2018	Private International Law A	6	Semester 1 Semester 2

Note: Select all 19 units (102 credit points).

Block 6 - Law Electives (Min CP: 42,Max CP: 42)

Note: Candidates must successfully complete 42 credit points from Law elective. See Law Faculty Handbook for details: http://sydney.edu.au/handbooks/law/

Course:	Chemical & Biomolecular / Law (2016)
CP Required:	288
Min FT Duration:	6.00 Years
Min PT Duration:	N/A
Faculty/School:	Faculty of Engineering
Years Offered:	2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

Faculty of Engineering

Chemical & Biomolecular / Law (2016)

1. Overview