1. Overview

Course:	Civil / Arts (2022 and earlier) (2016)
CP Required:	240
Min FT Duration:	5.00 Years
Min PT Duration:	N/A
Faculty/School:	Faculty of Engineering
Years Offered:	2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

2. Requirements

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (156 credit points):

► 36 credit points of Engineering core units

► 108 credit points of Civil stream core units

► A minimum of 6 credit points of Civil Specialist Breadth units

► Between 0 and 12 credit points of Civil Specialist Depth units

Arts:

► 84 credit points of Arts units

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering

For the Bachelor of Engineering component of a combined degree:

(a) The units of study that may be taken for the Bachelor of Engineering component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering single degree;

(b) Except where approved, all candidates must complete a minimum of 144 credit points comprising:

(i) 36cp from the Engineering Core Table, including all required units;

(ii) 108cp from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Candidates who do not meet the requirements for the award of the Bachelor of Engineering Honours but who have otherwise satisfied the requirements of the Bachelor of Engineering shall graduate with the Bachelor of Engineering pass degree.

Requirements for the Bachelor of Arts

For the Bachelor of Arts component of a combined degree:

(a) The units of study that may be taken are set out in Table A from the Faculty of Arts and Social Sciences Tables of units of study.

(b) Candidates must complete a total of 84 credit points from Table A, including:

(i) a major from Table A

(ii) a minimum of 54 credit points of 2000/3000 level units of study.

Candidates for the award of the Bachelor of Arts (Honours) who do not meet the requirements, and who have not already graduated, will be awarded the Bachelor of Arts pass degree.

Engineering Honours requirements

(a) an EWAM of at least 65 immediately prior to the semester in which a thesis unit of study is first attempted; and

(b) have an EIHWAM of at least 65 at the completion of the degree; and

(c) complete the requirements within a time limit of 5 years for a single Bachelor of Engineering Honours degree or complete the requirements within a time limit of 6 years for a combined Bachelor of Engineering Honours combined degree.

Candidates who satisfy the requirements for the Engineering degree, but who have not satisfied each of Clauses (a), (b) and (c), will qualify for the award of the Bachelor of Engineering degree (i.e. the PASS degree, awarded without Honours).

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Note: ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students. MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.

Note: MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.

Note: ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv, with Faculty approval.

Note: The degree requires a minimum of 6 cp to be selected from the Breadth Unit Block, and up to 6 cp from the Depth Unit Block.

ENGG3111 may be replaced by ENGG3062 Technology Education (Adv), with Faculty approval.

Note: The degree requires a minimum of 6 cp to be selected from the Breadth Unit Block, and up to 6 cp from the Depth Unit Block.

Note: ENGG4111 may be replaced by ENGG4064/5 Advanced Engineering Design A/B, with Faculty approval.

4. Pathways

48cp Majors

Type

CP

CP From

Note: From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.

You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors

Major in Humanitarian Engineering (24cp)

Type	CP	CP From
Core	6	ASNS2665: Understanding Southeast Asia Note: Students may take PMGT3857, EDUF3026, ITLS6007 or HSBH3009 instead of ASNS2665 as part of the Humanitarian Engineering major
Core	6	CIVL3310: Humanitarian Engineering
Core	6	CIVL5320: Engineering for Sustainable Development
Core	6	CIVL5330: Global Engineering Field Work Note: Students may take SLIC3000 or SLIC4000 instead of CIVL5330 as part of the Humanitarian Engineering major

Major in Transport Engineering (24cp)

Type	CP	CP From
Core	6	CIVL3703: Transport Policy, Planning and Deployment
Civil Specialist - Depth	6	Select from CIVL5701: Transport Networks
Civil Specialist - Depth	6	Select from CIVL5702: Traffic Engineering

Note: An additional 6 Credit points must be taken from:

A maximum of 6cp from any other CIVL3###, CIVL4### or CIVL5### unit from the Civil Core Table or the Civil Specialist Table(s)

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 48)

Unit Code	Unit Name	CP	Sessions Offered
AERO2711	Aerospace Engineering Project 1	6	Semester 1 Semester 2 Int February Int July
AERO3711	Aerospace Engineering Project 2	6	Semester 1 Semester 2 Int February Int July
AERO4711	Aerospace Engineering Project 3	6	Semester 1 Semester 2 Int February Int July
AMME4010	Major Industrial Project	24	Semester 1 Semester 2
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
CHNG4203	Major Industrial Project	24	Semester 1 Semester 2
CHNG4811	Thesis A	6	Semester 1 Semester 2
CHNG4812	Thesis B	6	Semester 1 Semester 2
CIVL4022	Thesis A	6	Semester 1 Semester 2
CIVL4023	Thesis B	6	Semester 1 Semester 2
ELEC4712	Thesis A	6	Semester 1 Semester 2
ELEC4713	Thesis B	6	Semester 1 Semester 2
ELEC4714	Major Industrial Project	24	Semester 1 Semester 2
ENGG1061	Advanced Engineering 1	6	Semester 1 Semester 2
ENGG1111	Integrated Engineering 1	6	Semester 1
ENGG2062	Engineering Project: Business Plan 2 Adv	6	Semester 2
ENGG2111	Integrated Engineering 2	2	Semester 1 Semester 2 Int February
ENGG3062	Technology Education (Advanced)	6	Semester 2
ENGG3111	Integrated Engineering 3	2	Semester 1 Semester 2
ENGG4000	Practical Experience	0	Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December
ENGG4064	Advanced Engineering Design A	6	Semester 2 Int July
ENGG4065	Advanced Engineering Design B	6	Semester 2
ENGG4111	Integrated Engineering 4	2	Semester 1
MATH1001	Differential Calculus	3	Semester 1 Summer Main
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1003	Integral Calculus and Modelling	3	Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1901	Differential Calculus (Advanced)	3	Semester 1
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1903	Integral Calculus and Modelling Advanced	3	Semester 2
MATH1905	Statistics (Advanced)	3	Semester 2

Note: Complete a minimum of 36cp including:

- ENGG4000 Practical Experience (0cp)

- Exactly 6cp from ENGG1111 Integrated Engineering 1 (6cp) OR ENGG1061 Advanced Engineering 1A (6cp) (see note 1)

- At least 2cp from ENGG2xxx Integrated Engineering 2 (2cp) OR ENGG2062 Engineering Project Business Plan 2 Adv (6cp) (see note 1) OR AERO2711 Aerospace Engineering Project 1 (see note 1)

- At least 2cp from ENGG3xxx Integrated Engineering 3 (2cp) OR ENGG3062 Technology Education (Advanced) (6cp) (see note 1) OR AERO3711 Advanced Aerospace Project 2 (see note 1)

- At least 2cp from ENGG4xxx Integrated Engineering 4 (2cp) OR ENGG4064 Advanced Engineering Design A (6cp) (see note 1) OR ENGG4065 Advanced Engineering Design B (6cp) (see note 1) OR AERO4711 Advanced Aerospace Project 3 (see note 1)

- Exactly 12cp of MATH1xxxx units: MATH1001 Differential Calculus (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1003 Integral Calculus AND Modelling (3cp) MATH1005 Statistics (3cp)

- A minimum of 12cp of (see notes 2,3) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 hesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. The Advanced Engineering units are only available to students who have been accepted into the relevant year of the Advanced Engineering program.

Note 2. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 2 - Civil Stream Core

Unit Code	Unit Name	CP	Sessions Offered
CIVL1810	Engineering Construction and Surveying	6	Semester 2
CIVL1900	Introduction to Civil Engineering	6	Semester 1
CIVL2010	Environmental Engineering	6	Semester 2
CIVL2110	Materials	6	Semester 1 Semester 2
CIVL2201	Structural Mechanics	6	Semester 1
CIVL2410	Soil Mechanics 1	6	Semester 2
CIVL2611	Introductory Fluid Mechanics	6	Semester 2
CIVL2700	Transport Systems	6	Semester 1
CIVL2812	Project Appraisal	6	Semester 2
CIVL3205	Concrete Structures 1	6	Semester 1
CIVL3206	Steel Structures 1	6	Semester 2
CIVL3612	Fluid Mechanics	6	Semester 1
CIVL3811	Engineering Design and Construction	6	Semester 2
CIVL4903	Civil Engineering Design	6	Semester 1 Semester 2
ENGG1801	Engineering Computing	6	Semester 1 Int January
ENGG1802	Engineering Mechanics	6	Semester 2 Summer Main Int January
GEOL1501	Engineering Geology 1	6	Semester 2
MATH2061	Linear Mathematics and Vector Calculus	6	Semester 1 Summer Main

Block 3 - Arts (Min CP: 84,Max CP: 84)

Note: Candidates must complete a total of 84 credit points from Table A in the Faculty of Arts and Social Sciences undergraduate handbook, including:

(i) a major from Table A

(ii) a minimum of 54 credit points of 2000/3000 level units of study.

See Faculty of Arts and Social Sciences undergraduate handbook at http://sydney.edu.au/handbooks/arts/

Block 4 - Civil Specialist - Breadth (Min CP: 6,Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
CIVL3235	Structural Analysis	6	Semester 2
CIVL3411	Geotechnical Engineering 1	6	Semester 2
CIVL3614	Hydrology	6	Semester 2
CIVL3703	Transport Policy, Planning and Deployment	6	Semester 1
CIVL3805	Project Scope, Time and Cost Management	6	Semester 1

Block 5 - Civil Specialist - Depth (Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
CIVL4810	Mgmnt of People, Quality and Risk in PE	6	Semester 2
CIVL4813	Contracts Formulation and Management	6	Semester 2
CIVL4814	Project Procurement and Tendering	6	Semester 2
CIVL4815	Project Formulation	6	Semester 1
CIVL5266	Steel Structures - Stability	6	Semester 1
CIVL5269	Advanced Concrete Structures	6	Semester 2
CIVL5277	Structural Rehabilitation and Timber Design	6	Semester 2
CIVL5320	Engineering for Sustainable Development	6	Semester 2
CIVL5351	Geoenvironmental Engineering	6	Semester 2
CIVL5453	Geotechnical Hazards	6	Semester 2
CIVL5458	Numerical Methods in Civil Engineering	6	Semester 1
CIVL5668	Fundamentals of Wind Engineering for Design	6	Semester 1
CIVL5670	Reservoir, Stream and Coastal Engineering	6	Semester 1
CIVL5701	Transport Networks	6	Semester 2
CIVL5702	Traffic Engineering	6	Semester 1
CIVL5999	Advanced Research and Analysis	6	Semester 1