2. Requirements

Summary

In summary, the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units (12cp of MATH1* can count towards Science requirements)

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of CBE Stream core units (6cp CHEM1* can count towards Science requirements)

Science (Medical Science Stream) (96 credit points):

► 24 credit points of Science degree core units (12cp of MATH1* can count towards Engineering requirements)

► 48 credit points of Medical Science core (6cp CHEM1* can count towards Engineering requirements)

► 12 credit points of OLE units

► 12 credit points of Science electives

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Science

For the Bachelor of Science component of a combined degree:

(a) The units of study that may be taken are set out in Table A of the Faculty of Science, and Table S and Table O of the Shared Pool for Undergraduate Degrees.

(b) Candidates must complete 96 credit points in the Bachelor of Science including:

(i) any required degree core units as set out in Table A of the Faculty of Science; and

(ii) a major (48 credit points) or a 3-year program with an embedded major from Table A of the Faculty of Science; and

(iii) 12 credit points of units of study in the Open Learning Environment as listed in Table O; and

(iv) where appropriate, additional electives from Table A of the Faculty of Science or Table S;

(v) If enrolled in a stream, complete the requirements for the stream as specified in Table A of the Faculty of Science.

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type	CP	CP From
Engineering Core	6	Select from ENGG1111: Integrated Engineering 1
Medical Science Stream Core	6	Select from MEDS1001: Human Biology
Medical Science Stream Core	6	Select from CHEM1111: Chemistry 1A
Engineering Core	3	Select from MATH1002: Linear Algebra
Engineering Core	3	Select from MATH1021: Calculus of One Variable
Engineering Core	0	Select from ENGP1000: Professional Engagement Program 1 Note: All students must enrol in ENGP1000 in their first semester of enrolment. New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: MATH1021 and MATH1002 may be replaced by advanced units MATH1921 and MATH1902.

Year 1 - Semester 2

Type	CP	CP From
Medical Science Stream Core	6	Select from BIOL1007: From Molecules to Ecosystems
CBE Stream Core	6	Select from CHNG1103: Conservation of Mass and Energy
CBE Stream Core	6	Select from CHEM1112: Chemistry 1B
Engineering Core	3	Select from MATH1023: Multivariable Calculus and Modelling
Engineering Core	3	Select from MATH1005: Statistical Thinking with Data

Note: MATH1023 and MATH1005 may be replaced by advanced units MATH1923 and MATH1905.

Year 2 - Semester 1

Type	CP	CP From
CBE Stream Core	6	Select from ENGG1801: Engineering Computing
Medical Science Stream Core	6	Select from MEDS2003: Biochemistry and Molecular Biology
Medical Science Stream Core	6	Select from MEDS2002: Key Concepts in Pharmacology
Medical Science Stream Core	6	Select from MEDS2001: Key Concepts in Physiology

Year 2 - Semester 2

Type	CP	CP From
Engineering Core	2	Select from ENGG2111: Integrated Engineering 2
Science Units	12	Select from Unit Block: Science Units Note: 12cp OLEs
Medical Science Stream Core	6	Select from MEDS2005: Human Anatomy and Histology
Medical Science Stream Core	6	Select from MEDS2004: Microbes, Infection and Immunity
Engineering Core	0	Select from ENGP2000: Professional Engagement Program 2 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 3 - Semester 1

Type	CP	CP From
CBE Stream Core	6	Select from CHNG2803: Heat and Mass Transfer
CBE Stream Core	6	Select from CHNG2802: Chemical Engineering Modelling and Analysis
CBE Stream Core	6	Select from CHNG2801: Fluid Mechanics
Science Units	6	Select from Unit Block: Science Units Note: 3000-level Medical Science selective

Year 3 - Semester 2

Type	CP	CP From
CBE Stream Core	6	Select from CHNG2806: Separation Processes
CBE Stream Core	6	Select from CHNG2804: Chemical Engineering Thermodynamics
Medical Science Stream Core	6	Select from MEDS3888: Medical Science Interdisciplinary Project
CBE Stream Core	6	Select from CHNG2805: Engineering for a Sustainable Society Note: CHNG1106 replaces CHNG2805 from 2021.

Year 4 - Semester 1

Type	CP	CP From
Science Units	6	Select from Unit Block: Science Units Note: 3000-level Medical Science selective
Engineering Core	2	Select from ENGG3111: Integrated Engineering 3
CBE Stream Core	6	Select from CHNG3803: Reaction Engineering
CBE Stream Core	6	Select from CHNG3802: Process Dynamics and Control
CBE Stream Core	6	Select from CHNG3805: Particle Processing
Engineering Core	0	Select from ENGP3000: Professional Engagement Program 3 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 4 - Semester 2

Type	CP	CP From
Science Units	6	Select from Unit Block: Science Units Note: 3000-level Medical Science selective
CBE Stream Core	6	Select from CHNG3807: Products and Value Chains [not running in 2020]
CBE Stream Core	6	Select from CHNG3806: Risk Management for Chemical Engineering
CBE Stream Core	6	Select from CHNG3801: Process Plant Design

Year 5 - Semester 1

Type	CP	CP From
Engineering Core	2	Select from ENGG4111: Integrated Engineering 4
List	6	Select from Unit Blocks: CBE Specialist Electives - Depth Science Units Note: As there are 18cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 18cp of electives from either Engineering or Science, or a combination of both. Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
List	6	Select from Unit Blocks: CBE Specialist Electives - Depth Science Units Note: As there are 18cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 18cp of electives from either Engineering or Science, or a combination of both. Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
CBE Stream Core	6	Select from CHNG4802: Chemical Engineering Design A
Engineering Core	6	Select from CHNG4811: Thesis A

Year 5 - Semester 2

Type	CP	CP From
List	6	Select from Unit Blocks: CBE Specialist Electives - Depth Science Units Note: As there are 18cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 18cp of electives from either Engineering or Science, or a combination of both. Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
CBE Stream Core	6	Select from CHNG4806: Chemical Engineering Design B
Engineering Core	6	Select from CHNG4812: Thesis B

4. Pathways

Alternate Thesis Pathway : Major Industrial Project Placement Scheme (MIPPS)

Type	CP	CP From
Core	24	CHNG4203: Major Industrial Project

Note: MIPPS students take CHNG4203 Major Industrial Project Placement (24 credit points). This unit replaces regular Honours Thesis units (CHNG4811 and CHNG4812) along with CHNG4001 Practical Experience, CHNG4112 Foundation of Chemical Engineering Design A and 6 credit points of electives. Students are admitted to MIPPS by school permission only. Applications are taken in third year of study.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code	Unit Name	CP	Sessions Offered
AMME4010	Major Industrial Project	24	Semester 1 Semester 2
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
CHNG4203	Major Industrial Project	24	Semester 1 Semester 2
CHNG4811	Thesis A	6	Semester 1 Semester 2
CHNG4812	Thesis B	6	Semester 1 Semester 2
CIVL4022	Thesis A	6	Semester 1 Semester 2
CIVL4023	Thesis B	6	Semester 1 Semester 2
ELEC4712	Thesis A	6	Semester 1 Semester 2
ELEC4713	Thesis B	6	Semester 1 Semester 2
ELEC4714	Major Industrial Project	24	Semester 1 Semester 2
ENGG1111	Integrated Engineering 1	6	Semester 1
ENGG2111	Integrated Engineering 2	2	Semester 1 Semester 2 Int February
ENGG3111	Integrated Engineering 3	2	Semester 1 Semester 2
ENGG4111	Integrated Engineering 4	2	Semester 1
ENGP1000	Professional Engagement Program 1	0	Semester 1 Semester 2
ENGP2000	Professional Engagement Program 2	0	Semester 1 Semester 2
ENGP3000	Professional Engagement Program 3	0	Semester 1 Semester 2
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1021	Calculus of One Variable	3	Semester 1 Semester 2
MATH1023	Multivariable Calculus and Modelling	3	Semester 1 Semester 2
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1905	Statistics (Advanced)	3	Semester 2
MATH1921	Calculus of One Variable (Adv)	3	Semester 1
MATH1923	Multivariable Calculus and Modelling (Adv)	3	Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream or major.

Block 2 - CBE Stream Core (Min CP: 102,Max CP: 108)

Unit Code	Unit Name	CP	Sessions Offered
CHEM1111	Chemistry 1A	6	Semester 1 Semester 2 Int January
CHEM1112	Chemistry 1B	6	Semester 1 Semester 2 Int January
CHEM1911	Chemistry 1A (Adv)	6	Semester 1
CHEM1912	Chemistry 1B (Adv)	6	Semester 2
CHNG1103	Conservation of Mass and Energy	6	Semester 2
CHNG2801	Fluid Mechanics	6	Semester 1
CHNG2802	Chemical Engineering Modelling and Analysis	6	Semester 1
CHNG2803	Heat and Mass Transfer	6	Semester 1
CHNG2804	Chemical Engineering Thermodynamics	6	Semester 2
CHNG2805	Engineering for a Sustainable Society	6	Semester 2
CHNG2806	Separation Processes	6	Semester 2
CHNG3801	Process Plant Design	6	Semester 2
CHNG3802	Process Dynamics and Control	6	Semester 1
CHNG3803	Reaction Engineering	6	Semester 1
CHNG3805	Particle Processing	6	Semester 1
CHNG3806	Risk Management for Chemical Engineering	6	Semester 2
CHNG3807	Products and Value Chains [not running in 2020]	6	Semester 2
CHNG4802	Chemical Engineering Design A	6	Semester 1
CHNG4806	Chemical Engineering Design B	6	Semester 2
ENGG1801	Engineering Computing	6	Semester 1 Int January

Block 3 - CBE Specialist Electives - Depth (Max CP: 18)

Unit Code	Unit Name	CP	Sessions Offered
CHNG5001	Process Systems Engineering	6	Semester 2
CHNG5004	Mineral Processing	6	Semester 2
CHNG5006	Advanced Wastewater Engineering	6	Semester 2
CHNG5008	Nanotechnology in Chemical Engineering	6	Semester 2
CHNG5009	Digital Circular Economy	6	Semester 1
CHNG5601	Membrane Science	6	Semester 1
CHNG5602	Biophysics and Biosensors	6	Semester 2
CHNG5604	Advanced Membrane Engineering	6	Semester 2
CHNG5606	Advanced Food Processing	6	Semester 2
CHNG5607	Advanced Biochemical Engineering	6	Semester 1
ENGG5206	Exponential and Emerging Technologies	6	Semester 2

Block 4 - Medical Science Stream Core (Min CP: 48,Max CP: 54)

Unit Code	Unit Name	CP	Sessions Offered
BIOL1007	From Molecules to Ecosystems	6	Semester 2
CHEM1111	Chemistry 1A	6	Semester 1 Semester 2 Int January
MEDS1001	Human Biology	6	Semester 1
MEDS2001	Key Concepts in Physiology	6	Semester 1
MEDS2002	Key Concepts in Pharmacology	6	Semester 1
MEDS2003	Biochemistry and Molecular Biology	6	Semester 1
MEDS2004	Microbes, Infection and Immunity	6	Semester 2
MEDS2005	Human Anatomy and Histology	6	Semester 2
MEDS3888	Medical Science Interdisciplinary Project	6	Semester 2

Block 5 - Science Units (Min CP: 30,Max CP: 42)

Note: Candidates must complete 96 credit points of Science (Medical Science stream) study, including:

- 54cp core units

- 18cp 3000-level selective units

- 12 credit points of OLEs

- Elective units as required

Math and Chem units taken as part of the Engineering component may be counted towards the 96 cp total. See Science faculty handbook for list of Science units and majors: http://sydney.edu.au/handbooks/science/

Course:	Chemical & Biomolecular / Science (Medical Science Stream) (2018)
CP Required:	240
Min FT Duration:	5.00 Years
Min PT Duration:	N/A
Faculty/School:	Faculty of Engineering
Years Offered:	2022, 2021, 2020, 2019, 2018

Faculty of Engineering

Chemical & Biomolecular / Science (Medical Science Stream) (2018)

1. Overview