1. Overview

Course:	Civil / Science (2019)
CP Required:	240
Min FT Duration:	5.00 Years
Min PT Duration:	N/A
Faculty/School:	School of Civil Engineering
Years Offered:	2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

2. Requirements

Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units (12cp of MATH1XXX can count towards Science requirements)

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of Civil Stream core units

► Up to 24 credit points of any combination of Civil Specialist depth or Civil Specialist breadth units, with an 18 credit point maximum of Civil Specialist Breadth units

Science (96 credit points):

► *12 credit points of Science degree core units (12cp of MATH1XXX can count towards Engineering requirements)

► *48 credit points of Table A major

► 12 credit points of OLE units

► 24 credit points of electives from Science Table A or Table S

* The Science degree core units comprise 12 cp of MATH1xxx units and 12cp of 1000-level units from Table A. The 1000-level units from the Table A major count towards Science degree core requirement.

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Science

For the Bachelor of Science component of a combined degree:

(a) The units of study that may be taken are set out in Table A of the Faculty of Science, and Table S and Table O of the Shared Pool for Undergraduate Degrees.

(b) Candidates must complete 96 credit points in the Bachelor of Science including:

(i) any required degree core units as set out in Table A of the Faculty of Science; and

(ii) a major (48 credit points) or a 3-year program with an embedded major from Table A of the Faculty of Science; and

(iii) 12 credit points of units of study in the Open Learning Environment as listed in Table O; and

(iv) where appropriate, additional electives from Table A of the Faculty of Science or Table S;

(v) If enrolled in a stream, complete the requirements for the stream as specified in Table A of the Faculty of Science.

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Note: GEOL1501 does not count for credit with GEOS1003 or GEOS1903. Students enrolled in a Science major which requires GEOS1003 or GEOS1903 are exempt from GEOL1501 and must instead complete an additional unit from the list of Civil or Science electives.

From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

4. Pathways

Major in Construction Management

Type	CP	CP From
Engineering Core	12	Select from CIVL4022: Thesis A CIVL4023: Thesis B
Civil Core	18	Select from CIVL1810: Engineering Construction and Surveying CIVL2812: Project Appraisal CIVL4903: Civil Engineering Design
Civil Specialist - Breadth	6	Select from CIVL3805: Project Scope, Time and Cost Management
Civil Specialist - Depth	12	Select from CIVL4810: Mgmnt of People, Quality and Risk in PE CIVL4813: Contracts Formulation and Management CIVL4814: Project Procurement and Tendering CIVL4815: Project Formulation

Major in Environmental Engineering

Type	CP	CP From
Civil Specialist - Depth	12	Select from CIVL5351: Geoenvironmental Engineering CIVL5668: Fundamentals of Wind Engineering for Design CIVL5670: Reservoir, Stream and Coastal Engineering CIVL5999: Advanced Research and Analysis
Engineering Core	12	Select from CIVL4022: Thesis A CIVL4023: Thesis B
Civil Core	18	Select from CIVL1810: Engineering Construction and Surveying CIVL2010: Environmental Engineering CIVL4903: Civil Engineering Design
Civil Specialist - Breadth	6	Select from CIVL3614: Hydrology

Major in Geotechnical Engineering

Type	CP	CP From
Civil Specialist - Breadth	6	Select from CIVL3411: Geotechnical Engineering 1
Civil Core	18	Select from CIVL2410: Soil Mechanics 1 CIVL4903: Civil Engineering Design GEOL1501: Engineering Geology 1
Civil Specialist - Depth	12	Select from CIVL5351: Geoenvironmental Engineering CIVL5453: Geotechnical Hazards CIVL5458: Numerical Methods in Civil Engineering CIVL5460: Soil Mechanics 2 CIVL5999: Advanced Research and Analysis Note: CIVL5452 is also available
Engineering Core	12	Select from CIVL4022: Thesis A CIVL4023: Thesis B

Major in Humanitarian Engineering

Type	CP	CP From
Core	6	ASNS2665: Understanding Southeast Asia Note: Students may take PMGT3857, EDUF3026, ITLS6007 or HSBH3009 instead of ASNS2665 as part of the Humanitarian Engineering major
Engineering Core	18	Select from CIVL4022: Thesis A CIVL4023: Thesis B ENGG1111: Integrated Engineering 1
Civil Core	6	Select from CIVL1900: Introduction to Civil Engineering Note: Introduction units in other engineering disciplines are also accepted.
Civil Specialist - Breadth	6	Select from CIVL3310: Humanitarian Engineering
Civil Specialist - Depth	12	Select from CIVL5320: Engineering for Sustainable Development CIVL5330: Global Engineering Field Work

Major in Structures

Type	CP	CP From
Civil Specialist - Depth	12	Select from CIVL5266: Steel Structures - Stability CIVL5269: Advanced Concrete Structures CIVL5277: Structural Rehabilitation and Timber Design CIVL5458: Numerical Methods in Civil Engineering CIVL5999: Advanced Research and Analysis
Civil Specialist - Breadth	6	Select from CIVL3235: Structural Analysis
Civil Core	18	Select from CIVL1802: Statics CIVL2201: Structural Mechanics CIVL4903: Civil Engineering Design
Engineering Core	12	Select from CIVL4022: Thesis A CIVL4023: Thesis B

Major in Transport

Type	CP	CP From
Civil Core	18	Select from CIVL1810: Engineering Construction and Surveying CIVL2700: Transport Systems CIVL4903: Civil Engineering Design
Engineering Core	12	Select from CIVL4022: Thesis A CIVL4023: Thesis B
Civil Specialist - Depth	12	Select from CIVL5701: Transport Networks CIVL5702: Traffic Engineering CIVL5703: Transport Policy, Planning and Deployment Note: CIVL5704 also available
Civil Specialist - Breadth	6	Select from CIVL3704: Transport Informatics

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 48)

Unit Code	Unit Name	CP	Sessions Offered
AMME4010	Major Industrial Project	24	Semester 1 Semester 2
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
CHNG4203	Major Industrial Project	24	Semester 1 Semester 2
CHNG4811	Thesis A	6	Semester 1 Semester 2
CHNG4812	Thesis B	6	Semester 1 Semester 2
CIVL4022	Thesis A	6	Semester 1 Semester 2
CIVL4023	Thesis B	6	Semester 1 Semester 2
ELEC4712	Thesis A	6	Semester 1 Semester 2
ELEC4713	Thesis B	6	Semester 1 Semester 2
ELEC4714	Major Industrial Project	24	Semester 1 Semester 2
ENGG1111	Integrated Engineering 1	6	Semester 1
ENGG2111	Integrated Engineering 2	2	Semester 1 Semester 2 Int February
ENGG3111	Integrated Engineering 3	2	Semester 1 Semester 2
ENGG4111	Integrated Engineering 4	2	Semester 1
ENGP1000	Professional Engagement Program 1	0	Semester 1 Semester 2
ENGP2000	Professional Engagement Program 2	0	Semester 1 Semester 2
ENGP3000	Professional Engagement Program 3	0	Semester 1 Semester 2
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1021	Calculus of One Variable	3	Semester 1 Semester 2
MATH1023	Multivariable Calculus and Modelling	3	Semester 1 Semester 2
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1905	Statistics (Advanced)	3	Semester 2
MATH1921	Calculus of One Variable (Adv)	3	Semester 1
MATH1923	Multivariable Calculus and Modelling (Adv)	3	Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 2 - Civil Core (Min CP: 108,Max CP: 108)

Unit Code	Unit Name	CP	Sessions Offered
CIVL1802	Statics	6	Semester 1 Int January Int July
CIVL1810	Engineering Construction and Surveying	6	Semester 2
CIVL1900	Introduction to Civil Engineering	6	Semester 1
CIVL2010	Environmental Engineering	6	Semester 2
CIVL2110	Materials	6	Semester 1 Semester 2
CIVL2201	Structural Mechanics	6	Semester 1
CIVL2410	Soil Mechanics 1	6	Semester 2
CIVL2611	Introductory Fluid Mechanics	6	Semester 2
CIVL2700	Transport Systems	6	Semester 1
CIVL2812	Project Appraisal	6	Semester 2
CIVL3205	Concrete Structures 1	6	Semester 1
CIVL3206	Steel Structures 1	6	Semester 2
CIVL3612	Fluid Mechanics	6	Semester 1
CIVL3811	Engineering Design and Construction	6	Semester 2
CIVL4903	Civil Engineering Design	6	Semester 1 Semester 2
ENGG1801	Engineering Computing	6	Semester 1 Int January
GEOL1501	Engineering Geology 1	6	Semester 2
MATH2061	Linear Mathematics and Vector Calculus	6	Semester 1 Summer Main

Block 3 - Science Units (Min CP: 72,Max CP: 96)

Note: Candidates must complete 96 credit points of Science study, including at least one major in a Science subject area and 12 credit points of OLEs. Math and Geology units taken as part of the Engineering component may be counted towards the 96 cp total. See Science faculty handbook for list of Science units and majors: http://sydney.edu.au/handbooks/science/

Block 4 - Civil Specialist - Breadth (Max CP: 18)

Unit Code	Unit Name	CP	Sessions Offered
CIVL3235	Structural Analysis	6	Semester 2
CIVL3310	Humanitarian Engineering	6	Semester 1
CIVL3411	Geotechnical Engineering 1	6	Semester 2
CIVL3511	Basics of Integrated Building Engineering	6	Semester 1
CIVL3614	Hydrology	6	Semester 2
CIVL3704	Transport Informatics	6	Semester 1
CIVL3705	Transport Design: Sustainable and Safe Access	6	Semester 1
CIVL3805	Project Scope, Time and Cost Management	6	Semester 1

Block 5 - Civil Specialist - Depth (Max CP: 24)

Unit Code	Unit Name	CP	Sessions Offered
CIVL4203	Major Industrial Project	24	Semester 1 Semester 2
CIVL4810	Mgmnt of People, Quality and Risk in PE	6	Semester 2
CIVL4813	Contracts Formulation and Management	6	Semester 2
CIVL4814	Project Procurement and Tendering	6	Semester 2
CIVL4815	Project Formulation	6	Semester 1
CIVL5266	Steel Structures - Stability	6	Semester 1
CIVL5269	Advanced Concrete Structures	6	Semester 2
CIVL5276	Bridge Engineering	6	Semester 1
CIVL5277	Structural Rehabilitation and Timber Design	6	Semester 2
CIVL5320	Engineering for Sustainable Development	6	Semester 2
CIVL5330	Global Engineering Field Work	6	Int July
CIVL5351	Geoenvironmental Engineering	6	Semester 2
CIVL5453	Geotechnical Hazards	6	Semester 2
CIVL5458	Numerical Methods in Civil Engineering	6	Semester 1
CIVL5460	Soil Mechanics 2	6	Semester 1
CIVL5531	Advanced Integrated Building Engineering	6	Semester 1
CIVL5533	Energy-efficient Building Systems	6	Semester 2
CIVL5535	Building Envelope and Adaptive Engineering	6	Semester 2
CIVL5665	Water Supply for Towns and Cities	6	Semester 2
CIVL5668	Fundamentals of Wind Engineering for Design	6	Semester 1
CIVL5670	Reservoir, Stream and Coastal Engineering	6	Semester 1
CIVL5701	Transport Networks	6	Semester 2
CIVL5702	Traffic Engineering	6	Semester 1
CIVL5703	Transport Policy, Planning and Deployment	6	Semester 1
CIVL5999	Advanced Research and Analysis	6	Semester 1