Faculty of Engineering

Software / Project Management 2019+ (2019)


Note: This course version applies only to students first enrolling in 2019.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Software / Project Management 2019+ (2019)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: N/A
Faculty/School: Faculty of Engineering
Years Offered: 2025, 2024, 2023, 2022, 2021, 2020, 2019

2. Requirements

Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 102 credit points of Software stream core units

► 6 credit points of Software Specialist elective units

Project Management:

► 84 credit points of Project Management core units

Electives:

► 12 credit points chosen from Project Management elective units or Software Specialist elective units

The handbook rules governing this degree are as follows:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

To qualify for the award of the combined degree:

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Project Management

For the Bachelor of Project Management component of a combined degree:

(a) Candidates must complete 96 credit points comprising:

(i) 84 credit points of core units as set out in the Bachelor of Project Management Unit of Study Table

(ii) 12 credit points of electives from either the elective units set out in the Bachelor of Project Management Unit of Study Table, or from the Stream Electives in the candidate's Bachelor of Engineering Honours Stream

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type CP CP From
3 Select from MATH1002: Linear Algebra
6 Select from ENGG1111: Integrated Engineering 1
3 Select from MATH1021: Calculus of One Variable
6 Select from INFO1110: Introduction to Programming
6 Select from ENGG1850: Introduction to Project Management
0 Select from ENGP1000: Professional Engagement Program 1


Note: All students must enrol in ENGP1000 in their first semester of enrolment.

New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 1 - Semester 2

Type CP CP From
6 Select from PMGT1852: Facilitation and Stakeholder Engagement
3 Select from MATH1005: Statistical Thinking with Data
3 Select from MATH1023: Multivariable Calculus and Modelling
6 Select from ELEC1601: Introduction to Computer Systems
6 Select from INFO1113: Object-Oriented Programming

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 2 - Semester 1

Type CP CP From
6 Select from ENGG1863: Effective Project Communication
6 Select from COMP2017: Systems Programming
6 Select from COMP2123: Data Structures & Algorithms
6 Select from MATH2069: Discrete Mathematics and Graph Theory

Year 2 - Semester 2

Type CP CP From
6 Select from ENGG1865: Project Time, Cost and Resources
2 Select from ENGG2111: Integrated Engineering 2
6 Select from SOFT2412: Agile Software Development Practices
6 Select from SOFT2201: Software Construction and Design 1
6 Select from ISYS2120: Data & Information Management

Year 3 - Semester 1

Type CP CP From
6 Select from PMGT2711: Critical Thinking for Projects
6 Select from ENGG1860: Project Initiation & Scope
6 Select from SOFT3202: Software Construction and Design 2
6 Select from ISYS2110: Analysis & Design of Web Information Systems
0 Select from ENGP2000: Professional Engagement Program 2


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 3 - Semester 2

Type CP CP From
6 Select from PMGT2821: Project Conflict Management
6 Select from PMGT1711: Systems Thinking in Projects
6 Select from INFO3616: Principles of Security and Security Engineering
6 Select from ELEC3609: Internet Software Platforms

Year 4 - Semester 1

Type CP CP From
2 Select from ENGG3111: Integrated Engineering 3
6 Select from ENGG2851: Project Analytics
6 Select from ENGG2855: Project Acceptance
6 Select from ELEC5618: Software Quality Engineering
6 Select from COMP5348: Enterprise Scale Software Architecture


Note: Complete an additional 6 cp of Specialist Electives if core unit COMP5348 is not available.

Year 4 - Semester 2

Type CP CP From
6 Select from PMGT2822: Reframing Projects
6 Select from PMGT2854: Executing Projects
6 Select from ELEC5619: Object Oriented Application Frameworks
6 Select from SOFT3888: Software Development Project
0 Select from ENGP3000: Professional Engagement Program 3


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 5 - Semester 1

Type CP CP From
List
6 Select from Unit Blocks:
Software Specialist Electives
Project Management Electives
List
6 Select from Unit Blocks:
Software Specialist Electives
Project Management Electives
2 Select from ENGG4111: Integrated Engineering 4
6 Select from ELEC4712: Thesis A
6 Select from PMGT3858: Adapting to Project Context

Note: Students can replace ELEC4712 and ELEC4713 with INFO4991 and INFO4992 IT Research Thesis, subject to the approval of the Coursework Director of Electrical and Information Engineering.

At least 6 CP of software specialist electives must be taken (to complete the 108 CP for the software degree), this may be taken in either semester.

Year 5 - Semester 2

Type CP CP From
List
6 Select from Unit Blocks:
Software Specialist Electives
Project Management Electives
6 Select from ELEC4713: Thesis B
6 Select from ENGG3854: Legal Aspects of Projects

Note: Students can replace ELEC4712 and ELEC4713 with INFO4991 and INFO4992 IT Research Thesis, subject to the approval of the Coursework Director of Electrical and Information Engineering.

4. Pathways

No streams/majors defined for this course version.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
CHNG4203 Major Industrial Project 24 Semester 1
Semester 2
CHNG4811 Thesis A 6 Semester 1
Semester 2
CHNG4812 Thesis B 6 Semester 1
Semester 2
CIVL4022 Thesis A 6 Semester 1
Semester 2
CIVL4023 Thesis B 6 Semester 1
Semester 2
ELEC4712 Thesis A 6 Semester 1
Semester 2
ELEC4713 Thesis B 6 Semester 1
Semester 2
ELEC4714 Major Industrial Project 24 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4111 Integrated Engineering 4 2 Semester 1
ENGP1000 Professional Engagement Program 1 0 Semester 1
Semester 2
ENGP2000 Professional Engagement Program 2 0 Semester 1
Semester 2
ENGP3000 Professional Engagement Program 3 0 Semester 1
Semester 2
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 2 - Software Stream Core (Min CP: 102,Max CP: 102)

Unit Code Unit Name CP Sessions Offered
COMP2017 Systems Programming 6 Semester 1
COMP2123 Data Structures & Algorithms 6 Semester 1
Semester 2
COMP5348 Enterprise Scale Software Architecture 6 Semester 2
ELEC1601 Introduction to Computer Systems 6 Semester 1
Semester 2
ELEC3609 Internet Software Platforms 6 Semester 2
ELEC5618 Software Quality Engineering 6 Semester 1
ELEC5619 Object Oriented Application Frameworks 6 Semester 2
INFO1110 Introduction to Programming 6 Semester 1
Semester 2
INFO1113 Object-Oriented Programming 6 Semester 1
Semester 2
INFO3616 Principles of Security and Security Engineering 6 Semester 2
ISYS2110 Analysis & Design of Web Information Systems 6 Semester 1
ISYS2120 Data & Information Management 6 Semester 2
MATH2069 Discrete Mathematics and Graph Theory 6 Semester 1
SOFT2201 Software Construction and Design 1 6 Semester 2
SOFT2412 Agile Software Development Practices 6 Semester 2
SOFT3202 Software Construction and Design 2 6 Semester 1
SOFT3888 Software Development Project 6 Semester 2

Note: Complete all 17 units of study (102 credit points) from this table

Block 3 - Project Management Core (Min CP: 84,Max CP: 84)

Unit Code Unit Name CP Sessions Offered
ENGG1850 Introduction to Project Management 6 Semester 1
ENGG1860 Project Initiation & Scope 6 Semester 1
ENGG1863 Effective Project Communication 6 Semester 1
ENGG1865 Project Time, Cost and Resources 6 Semester 2
ENGG2851 Project Analytics 6 Semester 1
ENGG2855 Project Acceptance 6 Semester 1
ENGG3854 Legal Aspects of Projects 6 Semester 1
Semester 2
PMGT1711 Systems Thinking in Projects 6 Semester 2
PMGT1852 Facilitation and Stakeholder Engagement 6 Semester 2
PMGT2711 Critical Thinking for Projects 6 Semester 1
PMGT2821 Project Conflict Management 6 Semester 2
PMGT2822 Reframing Projects 6 Semester 2
PMGT2854 Executing Projects 6 Semester 2
PMGT3858 Adapting to Project Context 6 Semester 1

Note: In 2024, ENGG units will be re-coded to PMGT.

Block 4 - Software Specialist Electives (Min CP: 6,Max CP: 18)

Unit Code Unit Name CP Sessions Offered
COMP3308 Introduction to Artificial Intelligence 6 Semester 1
COMP3419 Graphics and Multimedia 6 Semester 2
COMP3520 Operating Systems Internals 6 Semester 2
COMP3608 Introduction to Artificial Intelligence (Adv) 6 Semester 1
COMP5045 Computational Geometry 6 Semester 1
COMP5047 Pervasive Computing 6 Semester 2
COMP5048 Visual Analytics 6 Semester 1
Semester 2
COMP5206 Information Technologies and Systems 6 Semester 1
COMP5318 Machine Learning and Data Mining 6 Semester 1
Semester 2
COMP5338 Advanced Data Models 6 Semester 2
COMP5415 Multimedia Design and Authoring 6 Semester 2
COMP5416 Advanced Network Technologies 6 Semester 2
COMP5424 Information Technology in Biomedicine 6 Semester 1
COMP5425 Multimedia Retrieval 6 Semester 1
COMP5426 Parallel and Distributed Computing 6 Semester 1
ELEC3104 Engineering Electromagnetics 6 Semester 1
ELEC3203 Electricity Networks 6 Semester 1
ELEC3204 Power Electronics and Applications 6 Semester 1
ELEC3206 Electrical Energy Conversion Systems 6 Semester 2
ELEC3304 Control 6 Semester 2
ELEC3305 Digital Signal Processing 6 Semester 1
ELEC3404 Electronic Circuit Design 6 Semester 1
ELEC3405 Communications Electronics and Photonics 6 Semester 2
ELEC3505 Communications 6 Semester 1
ELEC3506 Communications Networks 6 Semester 2
ELEC3607 Embedded Systems 6 Semester 1
ELEC3608 Computer Architecture 6 Semester 2
ELEC3610 E-Business Analysis and Design 6 Semester 1
ELEC3612 Pattern Recognition and Machine Intelligence 6 Semester 1
ELEC3702 Management for Engineers 6 Semester 2
ELEC3802 Fundamentals of Biomedical Engineering 6 Semester 1
ELEC3803 Bioelectronics [not offered in 2021] 6 Semester 2
ELEC4505 Digital Communication Systems 6 Semester 1
ELEC4706 Project Management 6 Semester 1
ELEC5101 Antennas and Propagation 6 Semester 2
ELEC5203 Topics in Power Engineering [not offered in 2021] 6 Semester 2
ELEC5204 Power Systems Analysis and Protection 6 Semester 1
ELEC5205 High Voltage Engineering 6 Semester 2
ELEC5206 Sustainable Energy Systems 6 Semester 2
ELEC5207 Advanced Power Conversion Technologies 6 Semester 2
ELEC5208 Intelligent Electricity Networks 6 Semester 1
ELEC5211 Power System Dynamics and Control 6 Semester 1
ELEC5212 Power System Planning and Markets 6 Semester 2
ELEC5303 Computer Control System Design [not Offered 2021] 6 Semester 1
ELEC5304 Intelligent Visual Signal Understanding 6 Semester 1
ELEC5305 Acoustics, Speech and Signal Processing 6 Semester 2
ELEC5306 Video Intelligence and Compression 6 Semester 1
ELEC5307 Advanced Signal Processing with Deep Learning 6 Semester 2
ELEC5403 Radio Frequency Engineering [not offered in 2021] 6 Semester 1
ELEC5405 Building Microchips: From Theory to Practice 6 Semester 1
ELEC5507 Error Control Coding 6 Semester 1
ELEC5508 Wireless Engineering 6 Semester 2
ELEC5509 Mobile Networks 6 Semester 1
ELEC5510 Satellite Communication Systems 6 Semester 2
ELEC5511 Optical Communication Systems 6 Semester 1
ELEC5512 Optical Networks 6 Semester 2
ELEC5514 IoT Wireless Sensing and Networking 6 Semester 2
ELEC5516 Electrical and Optical Sensor Design 6 Semester 1
ELEC5517 Software Defined Networks 6 Semester 2
ELEC5518 IoT for Critical Infrastructures 6 Semester 1
ELEC5614 Real Time Computing 6 Semester 1
ELEC5615 Advanced Computer Architecture 6 Semester 1
ELEC5616 Computer and Network Security 6 Semester 1
ELEC5617 Topics in Software Engineering 6 Semester 2
ELEC5620 Model Based Software Engineering 6 Semester 2
ELEC5622 Signals, Software and Health 6 Semester 2
ELEC5701 Technology Venture Creation [not offered in 2021] 6 Semester 2
ELEC5803 Advanced Bioelectronics [Not Offered 2019] 6 Semester 1
INFO3404 Database Systems 2 6 Semester 1
Semester 2
INFO3504 Database Systems 2 (Adv) 6 Semester 2
INFO3551 Information Technology Exchange 6 Semester 1
Semester 2
Int January
Int July
INFO5301 Information Security Management 6 Semester 1
Semester 2
INFO5990 Professional Practice in IT 6 Semester 1
Semester 2
INFO5991 Services Science Management and Engineering 6 Semester 2
INFO5992 Understanding IT Innovations 6 Semester 1
Semester 2
INFO5993 IT Research Methods 6 Semester 1
Semester 2
INFO6007 Project Management in IT 6 Semester 1
Semester 2

Note: At least 6cp are required from Software Specialist Electives block.

Block 5 - Project Management Electives (Max CP: 12)

Unit Code Unit Name CP Sessions Offered
ENGG2850 Project Cost and Finance 6 Semester 1
PMGT3611 Projects in Controlled Environment 6 Int June
PMGT3612 Agile Project Management 6 Int July
PMGT3623 Scheduling 6 Semester 2
PMGT3624 Change & Transformation 6 Semester 2
PMGT3856 Sustainability and Knowledge Management 6 Semester 1
PMGT3857 International Project Management 6 Semester 2

Note: In 2024, ENGG units will be re-coded to PMGT.

You may choose up to 12 credit points of PM Electives in place of 12 credit points of Software Specialist Electives