Faculty of Engineering

Chemical & Biomolecular / Science (Medical Science Stream) (2020)


Note: This course version applies only to students first enrolling in 2020.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Chemical & Biomolecular / Science (Medical Science Stream) (2020)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: N/A
Faculty/School: Faculty of Engineering
Years Offered: 2022, 2021, 2020, 2019, 2018

2. Requirements

Summary

In summary, the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units (12cp of MATH1* can count towards Science requirements)

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of CBE Stream core units (6cp CHEM1* can count towards Science requirements)

► Up to 18 credit points of Chemical Specialist depth units

Science (Medical Science Stream) (96 credit points):

► 24 credit points of Science degree core units (12cp of MATH1* can count towards Engineering requirements)

► 48 credit points of Medical Science core (6cp CHEM1* can count towards Engineering requirements)

► 12 credit points of OLE units

► 12 credit points of Science electives

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Science

For the Bachelor of Science component of a combined degree:

(a) The units of study that may be taken are set out in Table A of the Faculty of Science, and Table S and Table O of the Shared Pool for Undergraduate Degrees.

(b) Candidates must complete 96 credit points in the Bachelor of Science including:

(i) any required degree core units as set out in Table A of the Faculty of Science; and

(ii) a major (48 credit points) or a 3-year program with an embedded major from Table A of the Faculty of Science; and

(iii) 12 credit points of units of study in the Open Learning Environment as listed in Table O; and

(iv) where appropriate, additional electives from Table A of the Faculty of Science or Table S;

(v) If enrolled in a stream, complete the requirements for the stream as specified in Table A of the Faculty of Science.

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type CP CP From
6 Select from MEDS1001: Human Biology
6 Select from ENGG1111: Integrated Engineering 1
6 Select from CHEM1111: Chemistry 1A
3 Select from MATH1021: Calculus of One Variable
3 Select from MATH1002: Linear Algebra
0 Select from ENGP1000: Professional Engagement Program 1


Note: All students must enrol in ENGP1000 in their first semester of enrolment.

New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 1 - Semester 2

Type CP CP From
6 Select from BIOL1007: From Molecules to Ecosystems
6 Select from CHNG1103: Conservation of Mass and Energy
6 Select from CHEM1112: Chemistry 1B
3 Select from MATH1023: Multivariable Calculus and Modelling
3 Select from MATH1005: Statistical Thinking with Data

Note: MATH1023 and MATH1005 may be replaced by advanced units MATH1923 and MATH1905.

Year 2 - Semester 1

Type CP CP From
6 Select from MEDS2003: Biochemistry and Molecular Biology
6 Select from MEDS2002: Key Concepts in Pharmacology
6 Select from MEDS2001: Key Concepts in Physiology
6 Select from ENGG1810: Introduction to Engineering Computing


Note: ENGG1810 replaces ENGG1801 from 2021.

Year 2 - Semester 2

Type CP CP From
12 Select from Unit Block:
Science Units


Note: 12cp OLEs
6 Select from MEDS2005: Human Anatomy and Histology
6 Select from MEDS2004: Microbes, Infection and Immunity
2 Select from ENGG2111: Integrated Engineering 2


Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111.
0 Select from ENGP2000: Professional Engagement Program 2


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111. Students may take this unit in the final semester or may swap with an elective to take it earlier.

https://canvas.sydney.edu.au/courses/2806/pages/feit-changes-to-the-bachelor-of-engineering-honours-degree-how-they-affect-you

Year 3 - Semester 1

Type CP CP From
6 Select from CHNG2803: Heat and Mass Transfer
6 Select from CHNG2802: Chemical Engineering Modelling and Analysis
6 Select from CHNG2801: Fluid Mechanics
6 Select from Unit Block:
Science Units


Note: 3000-level Medical Science selective

Year 3 - Semester 2

Type CP CP From
6 Select from CHNG2806: Separation Processes
6 Select from CHNG2804: Chemical Engineering Thermodynamics
6 Select from MEDS3888: Medical Science Interdisciplinary Project
6 Select from CHNG2805: Engineering for a Sustainable Society


Note: CHNG1106 replaces CHNG2805 from 2021.

Year 4 - Semester 1

Type CP CP From
6 Select from CHNG3803: Reaction Engineering
6 Select from Unit Block:
Science Units


Note: 3000-level Medical Science selective
6 Select from CHNG3802: Process Dynamics and Control
6 Select from CHNG3805: Particle Processing
2 Select from ENGG3111: Integrated Engineering 3


Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111.
0 Select from ENGP3000: Professional Engagement Program 3


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 4 - Semester 2

Type CP CP From
6 Select from Unit Block:
Science Units


Note: 3000-level Medical Science selective
6 Select from CHNG3806: Risk Management for Chemical Engineering
6 Select from CHNG3804: Biochemical Engineering
6 Select from CHNG3801: Process Plant Design

Year 5 - Semester 1

Type CP CP From
List
6 Select from Unit Blocks:
CBE Specialist Electives - Depth
Science Units


Note: As there are 18cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 18cp of electives from either Engineering or Science, or a combination of both.

Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
List
6 Select from Unit Blocks:
CBE Specialist Electives - Depth
Science Units


Note: As there are 18cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 18cp of electives from either Engineering or Science, or a combination of both.

Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
6 Select from CHNG4802: Chemical Engineering Design A
6 Select from CHNG4811: Thesis A

Year 5 - Semester 2

Type CP CP From
List
6 Select from Unit Blocks:
CBE Specialist Electives - Depth
Science Units


Note: As there are 18cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 18cp of electives from either Engineering or Science, or a combination of both.

Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
6 Select from CHNG4806: Chemical Engineering Design B
6 Select from CHNG4812: Thesis B
2 Select from ENGG4111: Integrated Engineering 4


Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111. ENGG3112 can be taken in this semester, or earlier by switching an elective.

4. Pathways

Alternate Thesis Pathway : Major Industrial Project Placement Scheme (MIPPS)

Type CP CP From
Core
24 CHNG4203: Major Industrial Project

Note: MIPPS students take CHNG4203 Major Industrial Project Placement (24 credit points). This unit replaces regular Honours Thesis units (CHNG4811 and CHNG4812) along with CHNG4001 Practical Experience, CHNG4112 Foundation of Chemical Engineering Design A and 6 credit points of electives. Students are admitted to MIPPS by school permission only. Applications are taken in third year of study.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
CHNG4203 Major Industrial Project 24 Semester 1
Semester 2
CHNG4811 Thesis A 6 Semester 1
Semester 2
CHNG4812 Thesis B 6 Semester 1
Semester 2
CIVL4022 Thesis A 6 Semester 1
Semester 2
CIVL4023 Thesis B 6 Semester 1
Semester 2
ELEC4712 Thesis A 6 Semester 1
Semester 2
ELEC4713 Thesis B 6 Semester 1
Semester 2
ELEC4714 Major Industrial Project 24 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4111 Integrated Engineering 4 2 Semester 1
ENGP1000 Professional Engagement Program 1 0 Semester 1
Semester 2
ENGP2000 Professional Engagement Program 2 0 Semester 1
Semester 2
ENGP3000 Professional Engagement Program 3 0 Semester 1
Semester 2
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream or major.

Block 2 - CBE Stream Core (Min CP: 102,Max CP: 108)

Unit Code Unit Name CP Sessions Offered
CHEM1111 Chemistry 1A 6 Semester 1
Semester 2
CHEM1112 Chemistry 1B 6 Semester 1
Semester 2
CHEM1911 Chemistry 1A (Adv) 6 Semester 1
CHEM1912 Chemistry 1B (Adv) 6 Semester 2
CHNG1103 Conservation of Mass and Energy 6 Semester 2
CHNG2801 Fluid Mechanics 6 Semester 1
CHNG2802 Chemical Engineering Modelling and Analysis 6 Semester 1
CHNG2803 Heat and Mass Transfer 6 Semester 1
CHNG2804 Chemical Engineering Thermodynamics 6 Semester 2
CHNG2805 Engineering for a Sustainable Society 6 Semester 2
CHNG2806 Separation Processes 6 Semester 2
CHNG3801 Process Plant Design 6 Semester 2
CHNG3802 Process Dynamics and Control 6 Semester 1
CHNG3803 Reaction Engineering 6 Semester 1
CHNG3804 Biochemical Engineering 6 Semester 2
CHNG3805 Particle Processing 6 Semester 1
CHNG3806 Risk Management for Chemical Engineering 6 Semester 2
CHNG4802 Chemical Engineering Design A 6 Semester 1
CHNG4806 Chemical Engineering Design B 6 Semester 2
ENGG1801 Engineering Computing 6 Semester 1
Int January
ENGG1810 Introduction to Engineering Computing 6 Semester 1
Semester 2
Int February

Block 3 - CBE Specialist Electives - Depth (Max CP: 18)

Unit Code Unit Name CP Sessions Offered
CHNG5001 Process Systems Engineering 6 Semester 2
CHNG5004 Particles and Surfaces 6 Semester 2
CHNG5006 Advanced Wastewater Engineering 6 Semester 2
CHNG5008 Nanotechnology in Chemical Engineering 6 Semester 2
CHNG5009 Digital Circular Economy 6 Semester 1
CHNG5601 Membrane Science 6 Semester 1
CHNG5602 Cellular Biophysics 6 Semester 2
CHNG5604 Advanced Membrane Engineering 6 Semester 2
CHNG5606 Advanced Food Processing 6 Semester 2
CHNG5607 Advanced Biochemical Engineering 6 Semester 1
ENGG5206 Exponential and Emerging Technologies 6 Semester 2

Block 4 - Medical Science Stream Core (Min CP: 48,Max CP: 54)

Unit Code Unit Name CP Sessions Offered
BIOL1007 From Molecules to Ecosystems 6 Semester 2
CHEM1111 Chemistry 1A 6 Semester 1
Semester 2
MEDS1001 Human Biology 6 Semester 1
MEDS2001 Key Concepts in Physiology 6 Semester 1
MEDS2002 Key Concepts in Pharmacology 6 Semester 1
MEDS2003 Biochemistry and Molecular Biology 6 Semester 1
MEDS2004 Microbes, Infection and Immunity 6 Semester 2
MEDS2005 Human Anatomy and Histology 6 Semester 2
MEDS3888 Medical Science Interdisciplinary Project 6 Semester 2

Block 5 - Science Units (Min CP: 30,Max CP: 42)

Note: Candidates must complete 96 credit points of Science (Medical Science stream) study, including:

- 54cp core units

- 18cp 3000-level selective units

- 12 credit points of OLEs

- Elective units as required

Math and Chem units taken as part of the Engineering component may be counted towards the 96 cp total. See Science faculty handbook for list of Science units and majors: http://sydney.edu.au/handbooks/science/