Faculty of Engineering

Aeronautical / Project Management 2019+ (2025)


Note: This course version applies only to students first enrolling in 2025.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Aeronautical / Project Management 2019+ (2025)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: N/A
Faculty/School: Faculty of Engineering
Years Offered: 2025, 2024, 2023, 2022, 2021, 2020, 2019

2. Requirements

Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (156 credit points)

► 6 credit points of Introductory Computing units table

► 12 credit points of Foundation Mathematics units table

► 18 credit points of Project table

► The Professional Engagement Program (PEP) table comprising ENGP1001 (0cp), ENGP1002 (0cp), ENGP1003 (0cp), ENGP2001 (0cp), ENGP2002 (0cp), ENGP2003 (0cp), ENGP3001 (0cp) and ENGP3002 (0cp)

► 108 credit points of Aeronautical Stream Core units

► 12 credit points of Aeronautical Stream Core Extension Units

Project Management (84 credit points):

► 84 credit points of Project Management core units

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their school before enrolling.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type CP CP From
0 Select from ENGP1001: Professional Engagement Program 1A


Note: All students must enrol in ENGP1001 in their first semester of enrolment.
6 Select from AERO1560: Introduction to Aerospace Engineering
6 Select from ENGG1810: Introduction to Engineering Computing
6 Select from MATH1061: Mathematics 1A
6 Select from PMGT1850: Introduction to Project Management

Note: MATH1061 may be replaced by advanced unit MATH1961, subject to prerequisite conditions being met. Students should seek advice from their school before enrolling.

Year 1 - Semester 2

Type CP CP From
6 Select from AMME1802: Engineering Mechanics
0 Select from ENGP1002: Professional Engagement Program 1B
6 Select from AERO1400: Intro to Aircraft Construction and Design
6 Select from MATH1062: Mathematics 1B
6 Select from PMGT1865: Project Time, Cost and Resources

Note: MATH1062 may be replaced by advanced unit MATH1962.

Year 2 - Semester 1

Type CP CP From
0 Select from ENGP1003: Professional Engagement Program 1C
6 Select from AMME2000: Engineering Analysis
6 Select from AMME2500: Engineering Dynamics
6 Select from AMME1705: Introduction to Electromechanical Systems
6 Select from PMGT1860: Project Initiation and Scope

Year 2 - Semester 2

Type CP CP From
6 Select from AMME2200: Introductory Thermofluids
6 Select from AMME2301: Mechanics of Solids
0 Select from ENGP2001: Professional Engagement Program 2A
6 Select from AMME1362: Introduction to Engineering Materials
6 Select from PMGT1711: Systems Thinking in Projects

Year 3 - Semester 1

Type CP CP From
0 Select from ENGP2002: Professional Engagement Program 2B
6 Select from AMME3500: System Dynamics and Control
6 Select from PMGT2711: Critical Thinking for Projects
6 Select from AERO2710: Analysis of Aerospace Engineering Data
6 Select from PMGT1863: Effective Project Communication

Year 3 - Semester 2

Type CP CP From
0 Select from ENGP2003: Professional Engagement Program 2C
6 Select from AERO2703: Aircraft Performance and Operations
6 Select from PMGT1852: Facilitation and Stakeholder Engagement
6 Select from AERO2460: Aerospace Design 1
6 Select from AERO3260: Aerodynamics 1

Year 4 - Semester 1

Type CP CP From
0 Select from ENGP3001: Professional Engagement Program 3A
6 Select from AERO3261: Propulsion
6 Select from AERO3360: Aerospace Structures 1
6 Select from PMGT2851: Project Analysis
6 Select from PMGT2855: Project Acceptance

Year 4 - Semester 2

Type CP CP From
6 Select from PMGT2822: Reframing Projects
6 Select from AERO3465: Aerospace Design 2
0 Select from ENGP3002: Professional Engagement Program 3B
6 Select from PMGT2821: Project Conflict Management
6 Select from AERO3560: Flight Mechanics 1

Year 5 - Semester 1

Type CP CP From
6 Select from AMME4111: Thesis A
6 Select from Unit Block:
Aeronautical Stream Core Extension Units
6 Select from AERO4460: Aerospace Design 3
6 Select from PMGT3858: Adapting to Project Context

Year 5 - Semester 2

Type CP CP From
6 Select from AMME4112: Thesis B
6 Select from PMGT2854: Executing Projects
6 Select from Unit Block:
Aeronautical Stream Core Extension Units
6 Select from PMGT3854: Legal Aspects of Projects

4. Pathways

No streams/majors defined for this course version.

5. Unit Blocks

Block 0 - Introductory Computing Units (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
ENGG1810 Introduction to Engineering Computing 6 Semester 1
Semester 2
Int February
INFO1110 Introduction to Programming 6 Semester 1
Semester 2
INFO1910 Introduction to Programming (Advanced) 6 Semester 1
Semester 2

Note: Students must complete:

-6cp from ENGG1810 or (INFO1110 or INFO1910). For Aeronautical stream students it is recommended that ENGG1810 is taken.

Block 1 - Foundation Mathematics Units (Min CP: 12,Max CP: 12)

Unit Code Unit Name CP Sessions Offered
MATH1061 Mathematics 1A 6 Semester 1
Semester 2
MATH1062 Mathematics 1B 6 Semester 1
Semester 2
MATH1961 Mathematics 1A (Advanced) 6 Semester 1
MATH1962 Mathematics 1B (Advanced) 6 Semester 2

Block 2 - Projects Table (Min CP: 18,Max CP: 18)

Unit Code Unit Name CP Sessions Offered
AERO1560 Introduction to Aerospace Engineering 6 Semester 1
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
BMET1960 Biomedical Engineering 1A 6 Semester 1
CHNG1108 Introduction to Chemical Engineering 6 Semester 1
CIVL1900 Introduction to Civil Engineering 6 Semester 1
ELEC1004 Practical Introduction to Electrical Engineering 6 Semester 1
ELEC1005 Introduction to Software Engineering 6 Semester 1
ENGG1800 Introduction to Engineering A 6 Semester 1
MECH1560 Introduction to Mechanical Engineering 6 Semester 1
MTRX1701 Introduction to Mechatronic Engineering 6 Semester 1

Note: - Students are to select the introduction unit relevant to their stream.

- Students are to select the thesis units relevant to their stream. Aeronautical, Mechanical and Mechatronic students are to enrol in the AMME coded units. Students in both Electrical and Software are to enrol in the ELEC coded units.

Block 3 - Professional Engagement Program (PEP) Table

Unit Code Unit Name CP Sessions Offered
ENGP1001 Professional Engagement Program 1A 0 Semester 1
Semester 2
ENGP1002 Professional Engagement Program 1B 0 Semester 1
Semester 2
ENGP1003 Professional Engagement Program 1C 0 Semester 1
Semester 2
ENGP2001 Professional Engagement Program 2A 0 Semester 1
Semester 2
ENGP2002 Professional Engagement Program 2B 0 Semester 1
Semester 2
ENGP2003 Professional Engagement Program 2C 0 Semester 1
Semester 2
ENGP3001 Professional Engagement Program 3A 0 Semester 1
Semester 2
ENGP3002 Professional Engagement Program 3B 0 Semester 1
Semester 2

Note: -Candidates for the Bachelor of Engineering Honours must complete the Professional Engagement Program units of study.

- Candidates must enrol in ENGP1001 in their first semester of study

Block 4 - Aeronautical Stream Core (Min CP: 108,Max CP: 108)

Unit Code Unit Name CP Sessions Offered
AERO1400 Intro to Aircraft Construction and Design 6 Semester 2
AERO2460 Aerospace Design 1 6 Semester 2
AERO2703 Aircraft Performance and Operations 6 Semester 2
AERO2710 Analysis of Aerospace Engineering Data 6 Semester 1
AERO3260 Aerodynamics 1 6 Semester 2
AERO3261 Propulsion 6 Semester 1
AERO3360 Aerospace Structures 1 6 Semester 1
AERO3465 Aerospace Design 2 6 Semester 2
AERO3560 Flight Mechanics 1 6 Semester 2
AERO4460 Aerospace Design 3 6 Semester 1
AMME1362 Introduction to Engineering Materials 6 Semester 2
AMME1705 Introduction to Electromechanical Systems 6 Semester 1
AMME1802 Engineering Mechanics 6 Semester 2
AMME2000 Engineering Analysis 6 Semester 1
AMME2200 Introductory Thermofluids 6 Semester 2
AMME2301 Mechanics of Solids 6 Semester 2
AMME2500 Engineering Dynamics 6 Semester 1
AMME3500 System Dynamics and Control 6 Semester 1

Block 5 - Aeronautical Stream Core Extension Units (Min CP: 12,Max CP: 12)

Unit Code Unit Name CP Sessions Offered
AERO5260 Aerodynamics 2 6 Semester 1
AERO5360 Aerospace Structures 2 6 Semester 1
AERO5560 Flight Mechanics 2 6 Semester 2

Block 10 - Project Management Core (Min CP: 84,Max CP: 84)

Unit Code Unit Name CP Sessions Offered
PMGT1711 Systems Thinking in Projects 6 Semester 2
PMGT1850 Introduction to Project Management 6 Semester 1
PMGT1852 Facilitation and Stakeholder Engagement 6 Semester 2
PMGT1860 Project Initiation and Scope 6 Semester 1
PMGT1863 Effective Project Communication 6 Semester 1
PMGT1865 Project Time, Cost and Resources 6 Semester 2
PMGT2711 Critical Thinking for Projects 6 Semester 1
PMGT2821 Project Conflict Management 6 Semester 2
PMGT2822 Reframing Projects 6 Semester 2
PMGT2851 Project Analysis 6 Semester 1
PMGT2854 Executing Projects 6 Semester 2
PMGT2855 Project Acceptance 6 Semester 1
PMGT3854 Legal Aspects of Projects 6 Semester 1
Semester 2
PMGT3858 Adapting to Project Context 6 Semester 1