Faculty of Engineering

Civil Engineering

Civil (2018)


Note: This course version applies only to students first enrolling in 2018.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Civil (2018)
CP Required: 192
Min FT Duration: 4.00 Years
Min PT Duration: N/A
Faculty/School: Civil Engineering
Years Offered: 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

2. Requirements

Summary

In summary the requirements are:

Students must complete 192 credit points as follows:

► 36 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of Civil core units

► A minimum of 18 credit points of Civil breadth (3rd year) electives

► A minimum of 18 credit points of Civil depth (4th year) electives

► A maximum of 12 credit points of General (Free) Electives

The completion of a major is not necessary. If a student chooses to do a major, aligned majors can be completed within the 192 credit points described above.

Handbook Rules

The handbook rules governing this degree are as follows:

To qualify for the award of the Bachelor of Engineering Honours degree, a candidate must:

(a) successfully complete 192 credit points comprising:

(i) A minimum of 36 credit points from the Engineering Core Table, including all required units;

(ii) A minimum of 108 credit points from the Engineering Stream Table pertaining to the specialist stream being undertaken, including all required units;

(iii) A minimum of 48 credit points of additional units from the Engineering Stream Specialist Table pertaining to the specialist stream being undertaken, including satisfying any additional requirements specified for the Specialist Table.

(b) Successfully complete the requirements of the Professional Engagement Program

(2) The class of Honours will be determined by the EIHWAM.

(3) In exceptional circumstances, the Dean may vary the conditions for the award of Honours after seeking the advice of the relevant Head of School.

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester's standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Majors

A major requires:

(a) the completion of 24 credit points chosen from units of study listed in the table for that major;

(b) satisfying any additional requirements specified for the major, and listed with the table of units for the major;

(c) the completion of a thesis project that has been approved by the Head of School (or delegate) as relevant to the topic of the major.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type CP CP From
3 Select from MATH1002: Linear Algebra
3 Select from MATH1021: Calculus of One Variable
6 Select from CIVL1900: Introduction to Civil Engineering
6 Select from ENGG1801: Engineering Computing
6 Select from ENGG1111: Integrated Engineering 1
0 Select from ENGP1000: Professional Engagement Program 1


Note: All students must enrol in ENGP1000 in their first semester of enrolment.

New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: MATH1021 and MATH1002 may be replaced by advanced units MATH1921 and MATH1902.

Year 1 - Semester 2

Type CP CP From
6 Select from CIVL1802: Statics
3 Select from MATH1023: Multivariable Calculus and Modelling
6 Select from CIVL1810: Engineering Construction and Surveying
3 Select from MATH1005: Statistical Thinking with Data
6 Select from GEOL1501: Engineering Geology 1

Note: MATH1023 and MATH1005 may be replaced by advanced units MATH1923 and MATH1905.

Year 2 - Semester 1

Type CP CP From
6 Select from CIVL2201: Structural Mechanics
6 Select from MATH2061: Linear Mathematics and Vector Calculus
6 Select from CIVL2700: Transport Systems
6 Select from CIVL2110: Materials


Note: CIVL1110 replaces CIVL2110 from 2022.

Year 2 - Semester 2

Type CP CP From
6 Select from CIVL2010: Environmental Engineering
2 Select from ENGG2111: Integrated Engineering 2
6 Select from CIVL2410: Soil Mechanics
6 Select from CIVL2611: Introductory Fluid Mechanics
6 Select from CIVL2812: Project Appraisal
0 Select from ENGP2000: Professional Engagement Program 2


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 3 - Semester 1

Type CP CP From
2 Select from ENGG3111: Integrated Engineering 3
6 Select from Unit Block:
Civil Specialist - Breadth
6 Select from Unit Block:
Civil Specialist - Breadth
6 Select from CIVL3612: Fluid Mechanics
6 Select from CIVL3205: Concrete Structures 1

Note: The degree requires a minimum of 18 cp to be selected from the Breadth Unit Block.

Year 3 - Semester 2

Type CP CP From
6 Select from Unit Block:
Civil Specialist - Breadth
6 Select from Unit Block:
Civil Specialist - Breadth
6 Select from CIVL3811: Engineering Design and Construction
6 Select from CIVL3206: Steel Structures 1

Note: The degree requires a minimum of 18 cp to be selected from the Breadth Unit Block

Year 4 - Semester 1

Type CP CP From
6 Select from CIVL4903: Civil Engineering Design
2 Select from ENGG4111: Integrated Engineering 4
6 Select from CIVL4022: Thesis A
6 Select from Unit Block:
Civil Specialist - Depth
6 Select from Unit Block:
Civil Specialist - Depth
0 Select from ENGP3000: Professional Engagement Program 3


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: The degree requires a minimum of 18 credit points to be selected from the Depth Unit Block.

A maximum of 12 credit points of general electives may be taken during the entire degree.

Year 4 - Semester 2

Type CP CP From
6 Select from CIVL4023: Thesis B
6 Select from Unit Block:
Civil Specialist - Depth
6 Select from Unit Block:
Civil Specialist - Depth

Note: The degree requires a minimum of 18 credit points to be selected from the Depth Unit Block.

A maximum of 12 credit points of general electives may be taken during the entire degree.

4. Pathways

48cp Majors

Type CP CP From

Note: From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.

You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors

Major in Construction Management (24cp)

Type CP CP From
Core
6 CIVL3805: Project Scope, Time and Cost Management
12 Select from CIVL4810: Mgmnt of People, Quality and Risk in PE
CIVL4813: Contracts Formulation and Management
CIVL4814: Project Procurement and Tendering
CIVL4815: Project Formulation

Note: An additional 6 Credit points must be taken from:

A maximum of 6cp from any other CIVL3###, CIVL4### or CIVL5### unit from the Civil Core Table or the Civil Specialist Table(s)

Major in Environmental Engineering (24cp)

Type CP CP From
Core
6 CIVL3614: Hydrology
12 Select from CIVL5351: Geoenvironmental Engineering
CIVL5668: Fundamentals of Wind Engineering for Design
CIVL5670: Reservoir, Stream and Coastal Engineering
CIVL5999: Advanced Research and Analysis

Note: An additional 6 Credit points must be taken from:

A maximum of 6cp from any other CIVL3###, CIVL4### or CIVL5### unit from the Civil Core Table or the Civil Specialist Table(s)

Major in Geotechnical Engineering (24cp)

Type CP CP From
Core
6 CIVL3411: Geotechnical Engineering
12 Select from CIVL5351: Geoenvironmental Engineering
CIVL5453: Geotechnical Hazards
CIVL5458: Numerical Methods in Civil Engineering
CIVL5999: Advanced Research and Analysis

Note: An additional 6 Credit points must be taken from:

A maximum of 6cp from any other CIVL3###, CIVL4### or CIVL5### unit from the Civil Core Table or the Civil Specialist Table(s)

Major in Humanitarian Engineering (24cp)

Type CP CP From
Core
6 CIVL3310: Humanitarian Engineering
Core
6 CIVL5320: Engineering for Sustainable Development
Core
6 CIVL5330: Global Engineering Field Work


Note: Students may take SLIC3000 or SLIC4000 instead of CIVL5330 as part of the Humanitarian Engineering major
6 Select from ASNS2665: Understanding Southeast Asia
EDUF3026: Global Poverty and Education
HSBH3009: International Health Project
ITLS6007: Disaster Relief Operations [not offered in 2021]
PMGT3857: International Project Management


Note: To be taken from the Free Electives unit block

Major in Structures (24cp)

Type CP CP From
Core
6 CIVL3235: Structural Analysis
12 Select from CIVL5266: Steel Structures - Stability
CIVL5269: Advanced Concrete Structures
CIVL5277: Structural Rehabilitation and Timber Design
CIVL5458: Numerical Methods in Civil Engineering
CIVL5999: Advanced Research and Analysis

Note: An additional 6 Credit points must be taken from:

A maximum of 6cp from any other CIVL3###, CIVL4### or CIVL5### unit from the Civil Core Table or the Civil Specialist Table(s)

Major in Transport Engineering (24cp)

Type CP CP From
Core
6 CIVL3703: Transport Policy, Planning and Deployment
6 Select from CIVL5702: Traffic Engineering
6 Select from CIVL5701: Transport Networks

Note: An additional 6 Credit points must be taken from:

A maximum of 6cp from any other CIVL3###, CIVL4### or CIVL5### unit from the Civil Core Table or the Civil Specialist Table(s)

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
CHNG4203 Major Industrial Project 24 Semester 1
Semester 2
CHNG4811 Thesis A 6 Semester 1
Semester 2
CHNG4812 Thesis B 6 Semester 1
Semester 2
CIVL4022 Thesis A 6 Semester 1
Semester 2
CIVL4023 Thesis B 6 Semester 1
Semester 2
ELEC4712 Thesis A 6 Semester 1
Semester 2
ELEC4713 Thesis B 6 Semester 1
Semester 2
ELEC4714 Major Industrial Project 24 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4111 Integrated Engineering 4 2 Semester 1
ENGP1000 Professional Engagement Program 1 0 Semester 1
Semester 2
ENGP2000 Professional Engagement Program 2 0 Semester 1
Semester 2
ENGP3000 Professional Engagement Program 3 0 Semester 1
Semester 2
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream or major.

Block 2 - Civil Core (Min CP: 108,Max CP: 108)

Unit Code Unit Name CP Sessions Offered
CIVL1802 Statics 6 Semester 1
Int January
CIVL1810 Engineering Construction and Surveying 6 Semester 2
CIVL1900 Introduction to Civil Engineering 6 Semester 1
CIVL2010 Environmental Engineering 6 Semester 2
CIVL2110 Materials 6 Semester 1
Semester 2
CIVL2201 Structural Mechanics 6 Semester 1
CIVL2410 Soil Mechanics 6 Semester 2
CIVL2611 Introductory Fluid Mechanics 6 Semester 2
CIVL2700 Transport Systems 6 Semester 1
CIVL2812 Project Appraisal 6 Semester 2
CIVL3205 Concrete Structures 1 6 Semester 1
CIVL3206 Steel Structures 1 6 Semester 2
CIVL3612 Fluid Mechanics 6 Semester 1
CIVL3811 Engineering Design and Construction 6 Semester 2
CIVL4903 Civil Engineering Design 6 Semester 1
Semester 2
ENGG1801 Engineering Computing 6 Semester 1
Int January
GEOL1501 Engineering Geology 1 6 Semester 2
MATH2061 Linear Mathematics and Vector Calculus 6 Semester 1
Summer Main

Block 3 - Civil Specialist - Breadth (Min CP: 18,Max CP: 30)

Unit Code Unit Name CP Sessions Offered
CIVL3235 Structural Analysis 6 Semester 2
CIVL3310 Humanitarian Engineering 6 Semester 1
CIVL3411 Geotechnical Engineering 6 Semester 2
CIVL3511 Basics of Integrated Building Engineering 6 Semester 1
CIVL3614 Hydrology 6 Semester 2
CIVL3704 Transport Informatics 6 Semester 1
CIVL3805 Project Scope, Time and Cost Management 6 Semester 1

Block 4 - Civil Specialist - Depth (Min CP: 18,Max CP: 30)

Unit Code Unit Name CP Sessions Offered
CIVL4203 Major Industrial Project 24 Semester 1
Semester 2
CIVL4810 Mgmnt of People, Quality and Risk in PE 6 Semester 2
CIVL4813 Contracts Formulation and Management 6 Semester 2
CIVL4814 Project Procurement and Tendering 6 Semester 2
CIVL4815 Project Formulation 6 Semester 1
CIVL5266 Steel Structures - Stability 6 Semester 1
CIVL5269 Advanced Concrete Structures 6 Semester 2
CIVL5276 Bridge Engineering 6 Semester 2
CIVL5277 Structural Rehabilitation and Timber Design 6 Semester 2
CIVL5320 Engineering for Sustainable Development 6 Semester 2
CIVL5330 Global Engineering Field Work 6 Int February
Int July
Int December
CIVL5351 Geoenvironmental Engineering 6 Semester 2
CIVL5452 Foundation Engineering 6 Semester 1
CIVL5453 Geotechnical Hazards 6 Semester 2
CIVL5458 Numerical Methods in Civil Engineering 6 Semester 1
CIVL5460 Particle Mechanics for Geotechnics 6 Semester 1
CIVL5531 Advanced Integrated Building Engineering 6 Semester 1
CIVL5533 Energy-efficient Building Systems 6 Semester 2
CIVL5535 Building Envelope and Adaptive Engineering 6 Semester 2
CIVL5668 Fundamentals of Wind Engineering for Design 6 Semester 1
CIVL5670 Reservoir, Stream and Coastal Engineering 6 Semester 1
CIVL5701 Transport Networks 6 Semester 2
CIVL5702 Traffic Engineering 6 Semester 1
CIVL5703 Transport Policy, Planning and Deployment 6 Semester 1
CIVL5999 Advanced Research and Analysis 6 Semester 1

Block 5 - Engineering General Electives (Max CP: 12)

Unit Code Unit Name CP Sessions Offered
ASNS2665 Understanding Southeast Asia 6 Semester 1
Int February
Int July
EDUF3026 Global Poverty and Education 6 Semester 2
HSBH3009 International Health Project 6 Semester 2
ITLS6007 Disaster Relief Operations [not offered in 2021] 6 Int July
PMGT3857 International Project Management 6 Semester 2

Note: Students may take 12 credit points of free general electives to complete the total number of credit points for their degree. Students may take the following units of study as free general electives, provided they satisfy any prerequisite, quota, departmental permission or any other requirements of the units, and the units are not essentially the same or prohibited units for any of the other units in their degree.

(1) Any units of study from the Faculties of: (i) Engineering and Information Technologies (ii) Science (iii) Arts (iv) Sydney Business School

(2) Any other units of study approved by the Faculty of Engineering and Information Technologies Courses Committee, which will be published in an appropriate place by the Faculty.

(3) Any units of study approved by the Dean (or his/her delegate in these matters), or by the relevant Head of School or Program Director, on a case by case basis upon application by the student.