2. Requirements

Summary

In summary the requirements are:

Students must complete 192 credit points as follows:

► 36 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of Civil core units

► A minimum of 18 credit points of Civil breadth (3rd year) electives

► A minimum of 18 credit points of Civil depth (4th year) electives

► A maximum of 12 credit points of General (Free) Electives

The completion of a major is not necessary. If a student chooses to do a major, aligned majors can be completed within the 192 credit points described above.

Handbook Rules

The handbook rules governing this degree are as follows:

To qualify for the award of the Bachelor of Engineering Honours degree, a candidate must:

(a) successfully complete 192 credit points comprising:

(i) A minimum of 36 credit points from the Engineering Core Table, including all required units;

(ii) A minimum of 108 credit points from the Engineering Stream Table pertaining to the specialist stream being undertaken, including all required units;

(iii) A minimum of 48 credit points of additional units from the Engineering Stream Specialist Table pertaining to the specialist stream being undertaken, including satisfying any additional requirements specified for the Specialist Table.

(b) Successfully complete the requirements of the Professional Engagement Program

(2) The class of Honours will be determined by the EIHWAM.

(3) In exceptional circumstances, the Dean may vary the conditions for the award of Honours after seeking the advice of the relevant Head of School.

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester's standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Majors

A major requires:

(a) the completion of 24 credit points chosen from units of study listed in the table for that major;

(b) satisfying any additional requirements specified for the major, and listed with the table of units for the major;

(c) the completion of a thesis project that has been approved by the Head of School (or delegate) as relevant to the topic of the major.

Dalyell Scholars Program

Unit substitutions may be available for students enrolled in the Dalyell Scholars Program, depending on their year of commencement and degree. Dalyell Scholars can view the Canvas page for further information specific to their circumstances: https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 2

Type	CP	CP From
Engineering Core	3	Select from MATH1005: Statistical Thinking with Data
Engineering Core	3	Select from MATH1021: Calculus of One Variable
Civil Core	6	Select from GEOL1501: Engineering Geology 1
Engineering Core	6	Select from ENGG1111: Integrated Engineering 1
Civil Core	6	Select from CIVL1802: Statics
Engineering Core	0	Select from ENGP1000: Professional Engagement Program 1 Note: All students must enrol in ENGP1000 in their first semester of enrolment. New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: MATH1021 and MATH1005 may be replaced by advanced units MATH1921 and MATH1905.

Year 2 - Semester 1

Type	CP	CP From
Engineering Core	3	Select from MATH1023: Multivariable Calculus and Modelling
Civil Core	6	Select from CIVL2201: Structural Mechanics
Engineering Core	3	Select from MATH1002: Linear Algebra
Civil Core	6	Select from ENGG1801: Engineering Computing
Civil Core	6	Select from CIVL1900: Introduction to Civil Engineering

Note: MATH1023 and MATH1002 may be replaced by advanced units MATH1923 and MATH1902.

Year 2 - Semester 2

Type	CP	CP From
Engineering Core	2	Select from ENGG2111: Integrated Engineering 2
Civil Core	6	Select from CIVL1810: Engineering Construction and Surveying
Civil Core	6	Select from CIVL2611: Introductory Fluid Mechanics
Civil Core	6	Select from CIVL2410: Soil Mechanics 1
Civil Core	6	Select from CIVL2010: Environmental Engineering

Year 3 - Semester 1

Type	CP	CP From
Civil Specialist - Breadth	6	Select from Unit Block: Civil Specialist - Breadth
Civil Core	6	Select from MATH2061: Linear Mathematics and Vector Calculus
Civil Core	6	Select from CIVL2700: Transport Systems
Engineering Core	0	Select from ENGP2000: Professional Engagement Program 2 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes
Civil Core	6	Select from CIVL2110: Materials Note: CIVL1110 replaces CIVL2110 from 2022.

Note: The degree requires a minimum of 18 cp to be selected from the Breadth Unit Block.

Year 3 - Semester 2

Type	CP	CP From
Civil Specialist - Breadth	6	Select from Unit Block: Civil Specialist - Breadth
Civil Core	6	Select from CIVL2812: Project Appraisal
Civil Core	6	Select from CIVL3811: Engineering Design and Construction
Civil Core	6	Select from CIVL3206: Steel Structures 1

Note: The degree requires a minimum of 18 cp to be selected from the Breadth Unit Block.

Year 4 - Semester 1

Type	CP	CP From
Engineering Core	2	Select from ENGG3111: Integrated Engineering 3
Civil Specialist - Breadth	6	Select from Unit Block: Civil Specialist - Breadth
Civil Core	6	Select from CIVL3205: Concrete Structures 1
Civil Core	6	Select from CIVL3612: Fluid Mechanics
Engineering Core	6	Select from CIVL4022: Thesis A

Note: The degree requires a minimum of 18 cp to be selected from the Breadth Unit Block.

Year 4 - Semester 2

Type	CP	CP From
Civil Specialist - Depth	6	Select from Unit Block: Civil Specialist - Depth
Civil Specialist - Depth	6	Select from Unit Block: Civil Specialist - Depth
Civil Specialist - Breadth	6	Select from Unit Block: Civil Specialist - Breadth
Engineering Core	6	Select from CIVL4023: Thesis B
Engineering Core	0	Select from ENGP3000: Professional Engagement Program 3 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: The degree requires a minimum of 18 cp to be selected from the Breadth Unit Block.

The degree requires a minimum of 18 credit points to be selected from the Depth Unit Block.

A maximum of 12 credit points of general electives may be taken during the entire degree.

Year 5 - Semester 1

Type	CP	CP From
Engineering Core	2	Select from ENGG4111: Integrated Engineering 4
Civil Specialist - Depth	6	Select from Unit Block: Civil Specialist - Depth
Civil Specialist - Depth	6	Select from Unit Block: Civil Specialist - Depth
Civil Core	6	Select from CIVL4903: Civil Engineering Design

Note: The degree requires a minimum of 18 credit points to be selected from the Depth Unit Block.

A maximum of 12 credit points of general electives may be taken during the entire degree.

4. Pathways

48cp Majors

Type

CP From

Note: From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.

You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors