Faculty of Engineering

Civil / Science (Medical Science Stream) (2019)


Note: This course version applies only to students first enrolling in 2019.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Civil / Science (Medical Science Stream) (2019)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: N/A
Faculty/School: Faculty of Engineering
Years Offered: 2022, 2021, 2020, 2019, 2018

2. Requirements

Summary

In summary, the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units (12cp of MATH1* can count towards Science requirements)

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of Civil Stream core units

► Up to 12 credit points of any combination of Civil Specialist depth or Civil Specialist breadth units

Science (Medical Science Stream) (96 credit points):

► 24 credit points of Science degree core units (12cp of MATH1* can count towards Engineering requirements)

► 48 credit points of Medical Science core

► 12 credit points of OLE units

► 12 credit points of Science electives

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Science

For the Bachelor of Science component of a combined degree:

(a) The units of study that may be taken are set out in Table A of the Faculty of Science, and Table S and Table O of the Shared Pool for Undergraduate Degrees.

(b) Candidates must complete 96 credit points in the Bachelor of Science including:

(i) any required degree core units as set out in Table A of the Faculty of Science; and

(ii) a major (48 credit points) or a 3-year program with an embedded major from Table A of the Faculty of Science; and

(iii) 12 credit points of units of study in the Open Learning Environment as listed in Table O; and

(iv) where appropriate, additional electives from Table A of the Faculty of Science or Table S;

(v) If enrolled in a stream, complete the requirements for the stream as specified in Table A of the Faculty of Science.

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type CP CP From
6 Select from CHEM1111: Chemistry 1A
6 Select from CIVL1900: Introduction to Civil Engineering
6 Select from MEDS1001: Human Biology
3 Select from MATH1021: Calculus of One Variable
3 Select from MATH1002: Linear Algebra
0 Select from ENGP1000: Professional Engagement Program 1


Note: All students must enrol in ENGP1000 in their first semester of enrolment.

New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Equivalent advanced level units can replace Medical Science Core units, subject to prerequisite conditions being met. Students should seek advice from their department before enrolling.

Year 1 - Semester 2

Type CP CP From
6 Select from CIVL1802: Statics
6 Select from GEOL1501: Engineering Geology 1
6 Select from BIOL1007: From Molecules to Ecosystems
3 Select from MATH1023: Multivariable Calculus and Modelling
3 Select from MATH1005: Statistical Thinking with Data

Note: MATH1023 and MATH1005 may be replaced by advanced units MATH1923 and MATH1905.

Equivalent advanced level units can replace Medical Science Core units, subject to prerequisite conditions being met. Students should seek advice from their department before enrolling.

Year 2 - Semester 1

Type CP CP From
6 Select from ENGG1801: Engineering Computing
6 Select from MEDS2003: Biochemistry and Molecular Biology
6 Select from MEDS2002: Key Concepts in Pharmacology
6 Select from MEDS2001: Key Concepts in Physiology

Year 2 - Semester 2

Type CP CP From
6 Select from CIVL1810: Engineering Construction and Surveying
6 Select from MEDS2005: Human Anatomy and Histology
6 Select from MEDS2004: Microbes, Infection and Immunity
6 Select from ENGG1111: Integrated Engineering 1
0 Select from ENGP2000: Professional Engagement Program 2


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 3 - Semester 1

Type CP CP From
6 Select from CIVL2700: Transport Systems
6 Select from CIVL2201: Structural Mechanics
6 Select from Unit Block:
Science Units


Note: 3000-level Medical Science selective
6 Select from CIVL2110: Materials


Note: CIVL1110 replaces CIVL2110 from 2022.

Year 3 - Semester 2

Type CP CP From
2 Select from ENGG2111: Integrated Engineering 2
6 Select from CIVL2611: Introductory Fluid Mechanics
6 Select from CIVL2410: Soil Mechanics 1
6 Select from CIVL2010: Environmental Engineering
0 Select from ENGP2000: Professional Engagement Program 2


Note: Enrolment in ENGP2000 is reliant on successful completion of ENGP1000. As such, the placement of ENGP2000 in this structure is example only, and actual enrolment in ENGP2000 is dependent on the time taken to complete ENGP1000.
6 Select from CIVL2812: Project Appraisal

Year 4 - Semester 1

Type CP CP From
6 Select from CIVL3205: Concrete Structures 1
6 Select from Unit Block:
Science Units


Note: 3000-level Medical Science selective
6 Select from CIVL3612: Fluid Mechanics
6 Select from MATH2061: Linear Mathematics and Vector Calculus
2 Select from ENGG3111: Integrated Engineering 3
0 Select from ENGP3000: Professional Engagement Program 3


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 4 - Semester 2

Type CP CP From
6 Select from Unit Block:
Science Units


Note: 6cp OLEs
6 Select from CIVL3811: Engineering Design and Construction
6 Select from CIVL3206: Steel Structures 1
6 Select from MEDS3888: Medical Science Interdisciplinary Project

Year 5 - Semester 1

Type CP CP From
2 Select from ENGG4111: Integrated Engineering 4
List
6 Select from Unit Blocks:
Civil Specialist - Breadth
Civil Specialist - Depth
Science Units


Note: Note: As there are 12cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 12cp of electives from either Engineering or Science, or a combination of both.

Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
6 Select from CIVL4022: Thesis A
6 Select from CIVL4903: Civil Engineering Design
6 Select from Unit Block:
Science Units


Note: 3000-level Medical Science selective

Year 5 - Semester 2

Type CP CP From
List
6 Select from Unit Blocks:
Civil Specialist - Breadth
Civil Specialist - Depth
Science Units


Note: As there are 12cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 12cp of electives from either Engineering or Science, or a combination of both.

Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
6 Select from Unit Block:
Science Units


Note: 6cp OLEs
6 Select from CIVL4023: Thesis B

4. Pathways

Major in Construction Management

Type CP CP From
12 Select from CIVL4022: Thesis A
CIVL4023: Thesis B
18 Select from CIVL1810: Engineering Construction and Surveying
CIVL2812: Project Appraisal
CIVL4903: Civil Engineering Design
6 Select from CIVL3805: Project Scope, Time and Cost Management
12 Select from CIVL4810: Mgmnt of People, Quality and Risk in PE
CIVL4813: Contracts Formulation and Management
CIVL4814: Project Procurement and Tendering
CIVL4815: Project Formulation

Major in Environmental Engineering

Type CP CP From
12 Select from CIVL5351: Geoenvironmental Engineering
CIVL5668: Fundamentals of Wind Engineering for Design
CIVL5670: Reservoir, Stream and Coastal Engineering
CIVL5999: Advanced Research and Analysis
12 Select from CIVL4022: Thesis A
CIVL4023: Thesis B
18 Select from CIVL1810: Engineering Construction and Surveying
CIVL2010: Environmental Engineering
CIVL4903: Civil Engineering Design
6 Select from CIVL3614: Hydrology

Major in Geotechnical Engineering

Type CP CP From
6 Select from CIVL3411: Geotechnical Engineering 1
18 Select from CIVL2410: Soil Mechanics 1
CIVL4903: Civil Engineering Design
GEOL1501: Engineering Geology 1
12 Select from CIVL5351: Geoenvironmental Engineering
CIVL5453: Geotechnical Hazards
CIVL5458: Numerical Methods in Civil Engineering
CIVL5460: Soil Mechanics 2
CIVL5999: Advanced Research and Analysis


Note: CIVL5452 is also available
12 Select from CIVL4022: Thesis A
CIVL4023: Thesis B

Major in Humanitarian Engineering

Type CP CP From
Core
6 ASNS2665: Understanding Southeast Asia


Note: Students may take PMGT3857, EDUF3026, ITLS6007 or HSBH3009 instead of ASNS2665 as part of the Humanitarian Engineering major
18 Select from CIVL4022: Thesis A
CIVL4023: Thesis B
ENGG1111: Integrated Engineering 1
6 Select from CIVL1900: Introduction to Civil Engineering


Note: Introduction units in other engineering disciplines are also accepted.
6 Select from CIVL3310: Humanitarian Engineering
12 Select from CIVL5320: Engineering for Sustainable Development
CIVL5330: Global Engineering Field Work

Major in Structures

Type CP CP From
12 Select from CIVL5266: Steel Structures - Stability
CIVL5269: Advanced Concrete Structures
CIVL5277: Structural Rehabilitation and Timber Design
CIVL5458: Numerical Methods in Civil Engineering
CIVL5999: Advanced Research and Analysis
6 Select from CIVL3235: Structural Analysis
18 Select from CIVL1802: Statics
CIVL2201: Structural Mechanics
CIVL4903: Civil Engineering Design
12 Select from CIVL4022: Thesis A
CIVL4023: Thesis B

Major in Transport

Type CP CP From
18 Select from CIVL1810: Engineering Construction and Surveying
CIVL2700: Transport Systems
CIVL4903: Civil Engineering Design
12 Select from CIVL4022: Thesis A
CIVL4023: Thesis B
6 Select from CIVL3704: Transport Informatics
12 Select from CIVL5701: Transport Networks
CIVL5702: Traffic Engineering
CIVL5703: Transport Policy, Planning and Deployment


Note: CIVL5704 also available

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
CHNG4203 Major Industrial Project 24 Semester 1
Semester 2
CHNG4811 Thesis A 6 Semester 1
Semester 2
CHNG4812 Thesis B 6 Semester 1
Semester 2
CIVL4022 Thesis A 6 Semester 1
Semester 2
CIVL4023 Thesis B 6 Semester 1
Semester 2
ELEC4712 Thesis A 6 Semester 1
Semester 2
ELEC4713 Thesis B 6 Semester 1
Semester 2
ELEC4714 Major Industrial Project 24 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4111 Integrated Engineering 4 2 Semester 1
ENGP1000 Professional Engagement Program 1 0 Semester 1
Semester 2
ENGP2000 Professional Engagement Program 2 0 Semester 1
Semester 2
ENGP3000 Professional Engagement Program 3 0 Semester 1
Semester 2
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream or major.

Block 2 - Civil Stream Core (Min CP: 108,Max CP: 108)

Unit Code Unit Name CP Sessions Offered
CIVL1802 Statics 6 Semester 1
Int January
Int July
CIVL1810 Engineering Construction and Surveying 6 Semester 2
CIVL1900 Introduction to Civil Engineering 6 Semester 1
CIVL2010 Environmental Engineering 6 Semester 2
CIVL2110 Materials 6 Semester 1
Semester 2
CIVL2201 Structural Mechanics 6 Semester 1
CIVL2410 Soil Mechanics 1 6 Semester 2
CIVL2611 Introductory Fluid Mechanics 6 Semester 2
CIVL2700 Transport Systems 6 Semester 1
CIVL2812 Project Appraisal 6 Semester 2
CIVL3205 Concrete Structures 1 6 Semester 1
CIVL3206 Steel Structures 1 6 Semester 2
CIVL3612 Fluid Mechanics 6 Semester 1
CIVL3811 Engineering Design and Construction 6 Semester 2
CIVL4903 Civil Engineering Design 6 Semester 1
Semester 2
ENGG1801 Engineering Computing 6 Semester 1
Int January
GEOL1501 Engineering Geology 1 6 Semester 2
MATH2061 Linear Mathematics and Vector Calculus 6 Semester 1
Summer Main

Block 3 - Medical Science Stream Core (Min CP: 54,Max CP: 54)

Unit Code Unit Name CP Sessions Offered
BIOL1007 From Molecules to Ecosystems 6 Semester 2
CHEM1111 Chemistry 1A 6 Semester 1
Semester 2
Int January
MEDS1001 Human Biology 6 Semester 1
MEDS2001 Key Concepts in Physiology 6 Semester 1
MEDS2002 Key Concepts in Pharmacology 6 Semester 1
MEDS2003 Biochemistry and Molecular Biology 6 Semester 1
MEDS2004 Microbes, Infection and Immunity 6 Semester 2
MEDS2005 Human Anatomy and Histology 6 Semester 2
MEDS3888 Medical Science Interdisciplinary Project 6 Semester 2

Note: Students in the Medical Science stream also complete 18 cp of 3000-level Medical Science disciplinary selective units.

The Medical Science stream requirements changed in 2024, resulting in changes to 2000-level MEDS units for students who began their degree before 2024.

MEDS2001, MEDS2002, MEDS2004 and MEDS2005 are discontinued and replaced by PHSI2007/PHSI2907, PCOL2021, MIMI2002/MIMI2902 and ANAT2011. ANAT2011 requires prerequisite BIOL1008, which will need to be completed as one of your Science elective units.

Block 4 - Civil Specialist - Breadth

Unit Code Unit Name CP Sessions Offered
CIVL3235 Structural Analysis 6 Semester 2
CIVL3310 Humanitarian Engineering 6 Semester 1
CIVL3411 Geotechnical Engineering 1 6 Semester 2
CIVL3511 Basics of Integrated Building Engineering 6 Semester 1
CIVL3614 Hydrology 6 Semester 2
CIVL3704 Transport Informatics 6 Semester 1
CIVL3705 Transport Design: Sustainable and Safe Access 6 Semester 1
CIVL3805 Project Scope, Time and Cost Management 6 Semester 1

Block 5 - Civil Specialist - Depth

Unit Code Unit Name CP Sessions Offered
CIVL4203 Major Industrial Project 24 Semester 1
Semester 2
CIVL4810 Mgmnt of People, Quality and Risk in PE 6 Semester 2
CIVL4813 Contracts Formulation and Management 6 Semester 2
CIVL4814 Project Procurement and Tendering 6 Semester 2
CIVL4815 Project Formulation 6 Semester 1
CIVL5266 Steel Structures - Stability 6 Semester 1
CIVL5269 Advanced Concrete Structures 6 Semester 2
CIVL5276 Bridge Engineering 6 Semester 1
CIVL5277 Structural Rehabilitation and Timber Design 6 Semester 2
CIVL5320 Engineering for Sustainable Development 6 Semester 2
CIVL5330 Global Engineering Field Work 6 Int July
CIVL5351 Geoenvironmental Engineering 6 Semester 2
CIVL5453 Geotechnical Hazards 6 Semester 2
CIVL5458 Numerical Methods in Civil Engineering 6 Semester 1
CIVL5460 Soil Mechanics 2 6 Semester 1
CIVL5531 Advanced Integrated Building Engineering 6 Semester 1
CIVL5533 Energy-efficient Building Systems 6 Semester 2
CIVL5535 Building Envelope and Adaptive Engineering 6 Semester 2
CIVL5665 Water Supply for Towns and Cities 6 Semester 2
CIVL5668 Fundamentals of Wind Engineering for Design 6 Semester 1
CIVL5670 Reservoir, Stream and Coastal Engineering 6 Semester 1
CIVL5701 Transport Networks 6 Semester 2
CIVL5702 Traffic Engineering 6 Semester 1
CIVL5703 Transport Policy, Planning and Deployment 6 Semester 1
CIVL5999 Advanced Research and Analysis 6 Semester 1

Block 6 - Science Units (Min CP: 30,Max CP: 42)

Note: Candidates must complete 96 credit points of Science (Medical Science stream) study, including:

- 54cp core units

- 18cp 3000-level selective units

- 12 credit points of OLEs

- Elective units as required

Math and Chem units taken as part of the Engineering component may be counted towards the 96 cp total. See Science faculty handbook for list of Science units and majors: http://sydney.edu.au/handbooks/science/