ProgramsU_ArchvBE2014 CombBE/BA 2014Mechatronic Engineering / Arts (2013)
Show information forcommencing students (ie. started First Year then).
The course requirements described here apply to persons who commenced their candidature after 1 January, 2013 and persons who commenced their candidature prior to 1 January, 2013 who elect to proceed under 2013 resolutions.
Candidates who commenced prior to 1 January, 2013 may complete the requirements in accordance with the resolutions in force at the time of their commencement, provided that requirements are completed by 1 January, 2018, or later date as the faculty may, in special circumstances, approve.
Candidates who first commenced in 2013, and are re-enrolling for 2014 or later, should be aware that there may have been changes in units of study offered since, Check that units are still available by clicking the unit of study link in the course table. See 2014 version of this course for up to date unit of study list.
For details of relevant resolutions see faculty handbook at sydney.edu.au/handbooks.
Print View | Download as PDF Administrative Information (Fees, ATAR etc.)
Select plan for Major/Pathway
Year 1 - Semester 1
| Type | CP | CP From |
Core | 6 | ENGG1801: Engineering Computing Note: INFO1103 is an acceptable alternate. |
Core | 3 | MATH1001: Differential Calculus |
Core | 3 | MATH1002: Linear Algebra |
Core | 6 | MTRX1701: Introduction to Mechatronic Engineering |
| 6 | Arts Note: The Arts component of the combined Mechatronics/Arts degree requires a minimum of 84 credit points of Arts units of study, including at least 54 credit points at 2nd or 3rd year level, and the completion of an Arts major. Consult the Resolutions for the Combined Engineering/Arts degree in Faculty handbooks for further details. |
Year 1 - Semester 2
| Type | CP | CP From |
Core | 6 | AMME1550: Dynamics 1 |
Core | 6 | ENGG1802: Engineering Mechanics |
Core | 3 | MATH1003: Integral Calculus and Modelling |
Core | 3 | MATH1005: Statistical Thinking with Data |
| 6 | Arts Note: The Arts component of the combined Mechatronics/Arts degree requires a minimum of 84 credit points of Arts units of study, including at least 54 credit points at 2nd or 3rd year level, and the completion of an Arts major. Consult the Resolutions for the Combined Engineering/Arts degree in Faculty handbooks for further details. |
Year 2 - Semester 1
| Type | CP | CP From |
Core | 6 | ELEC1103: Fundamentals of Electrical and Electronic Engineering |
Core | 6 | AMME2302: Materials 1 |
Core | 6 | AMME2500: Engineering Dynamics |
Core | 6 | MATH2067: DEs and Vector Calculus for Engineers |
Year 2 - Semester 2
| Type | CP | CP From |
Core | 6 | MTRX1702: Mechatronics 1 |
Core | 6 | ELEC2104: Electronic Devices and Circuits |
| 12 | Select from Arts Note: The Arts component of the combined Mechatronics/Arts degree requires a minimum of 84 credit points of Arts units of study, including at least 54 credit points at 2nd or 3rd year level, and the completion of an Arts major. Consult the Resolutions for the Combined Engineering/Arts degree in Faculty handbooks for further details. |
Year 3 - Semester 1
| Type | CP | CP From |
Core | 6 | MTRX2700: Mechatronics 2 |
Core | 6 | ELEC3404: Electronic Circuit Design |
| 12 | Select from Arts Note: The Arts component of the combined Mechatronics/Arts degree requires a minimum of 84 credit points of Arts units of study, including at least 54 credit points at 2nd or 3rd year level, and the completion of an Arts major. Consult the Resolutions for the Combined Engineering/Arts degree in Faculty handbooks for further details. |
Year 3 - Semester 2
| Type | CP | CP From |
Core | 6 | AMME2301: Mechanics of Solids |
Core | 6 | MECH2400: Mechanical Systems Design 1 |
| 12 | Select from Arts Note: The Arts component of the combined Mechatronics/Arts degree requires a minimum of 84 credit points of Arts units of study, including at least 54 credit points at 2nd or 3rd year level, and the completion of an Arts major. Consult the Resolutions for the Combined Engineering/Arts degree in Faculty handbooks for further details. |
Year 4 - Semester 1
| Type | CP | CP From |
Core | 6 | AMME3500: System Dynamics and Control |
Core | 6 | MECH3660: Manufacturing Engineering |
| 12 | Select from Arts Note: The Arts component of the combined Mechatronics/Arts degree requires a minimum of 84 credit points of Arts units of study, including at least 54 credit points at 2nd or 3rd year level, and the completion of an Arts major. Consult the Resolutions for the Combined Engineering/Arts degree in Faculty handbooks for further details. |
Year 4 - Semester 2
| Type | CP | CP From |
Core | 6 | MECH3460: Mechanical Systems Design 2 |
Core | 6 | MTRX3700: Mechatronics 3 |
| 12 | Select from Arts Note: The Arts component of the combined Mechatronics/Arts degree requires a minimum of 84 credit points of Arts units of study, including at least 54 credit points at 2nd or 3rd year level, and the completion of an Arts major. Consult the Resolutions for the Combined Engineering/Arts degree in Faculty handbooks for further details. |
Year 5 - Semester 1
| Type | CP | CP From |
Core | 6 | AMME4121: Engineering Project A Note: Students with ISWAM of 65% or greater are eligible for Honours pathway and can replace AMME4121 with AMME4111. School permission is required. |
Core | 0 | ENGG4000: Practical Experience |
Core | 6 | MECH4601: Professional Engineering 2 |
List | 12 | Select from Arts Mechatronics Electives Note: At least 18 credit points of Mechatronics elective units must be completed. These may be taken in either semester. |
Year 5 - Semester 2
| Type | CP | CP From |
Core | 6 | AMME4122: Engineering Project B Note: Students with ISWAM of 65% or greater are eligible for Honours pathway and can replace AMME4122 with AMME4112. |
List | 18 | Select from Arts Mechatronics Electives Note: The Arts component of the combined Mechatronics/Arts degree requires a minimum of 84 credit points of Arts units of study, including at least 54 credit points at 2nd or 3rd year level, and the completion of an Arts major. Consult the Resolutions for the Combined Engineering/Arts degree in Faculty handbooks for further details. At least 18 credit points of Mechatronics elective units must be completed. These may be taken in either semester |
Block 1 - Arts (Min CP: 84,Max CP: 84)
Note: For the Bachelor of Arts component, students are required to complete a total of 84 credit points of Table A units as listed in the handbook of the Faculty of Arts and Social Sciences, including a major from Table A and a minimum 54 credit points of 2000/3000 level units of study. See Faculty handbook at http://sydney.edu.au/handbooks
Block 2 - Mechatronics Electives (Min CP: 18,Max CP: 18)
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME4500 | Guidance, Navigation and Control | 6 | |
| AMME4700 | Inertial Navigation and the Kalman Filter | 6 | |
| AMME4710 | Computer Vision and Image Processing | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| AMME4790 | Introduction to Biomechatronics | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| MECH4720 | Sensors and Signals | 6 | |
| MECH4730 | Computers in Real-Time Control and Instrumentation | 6 | |
| MTRX4700 | Experimental Robotics | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| Course: | Mechatronic Engineering / Arts (2013) |
| CP Required: | 240 |
| Min FT Duration: | 5.00 Years |
| Min PT Duration: | N/A |
| Faculty/School: | University Archive |
| Years Offered: | 2014, 2013, 2012, 2011 |
| Requirements: | To qualify for the award of the combined degree, a candidate must complete 240 credit points comprising: (1) For the Bachelor of Engineering, all units of study prescribed in the table of units for the Bachelor of Engineering stream the candidate is pursuing. (2) For the Bachelor of Arts. a total of 84 credit points from Table A in the Faculty of Arts and Social Sciences Handbook, including: (a) a major from Table A; (b) a minimum 54 credit points of 2000/3000 level units of study. For further details, see Faculty Handbook at http://sydney.edu.au/handbooks/ |
Report Type:
