Faculty of Engineering

School of Biomedical Engineering

Biomedical / Law (2015)


Note: This course version applies only to students first enrolling in 2015.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Biomedical / Law (2015)
CP Required: 288
Min FT Duration: 6.00 Years
Min PT Duration: N/A
Faculty/School: School of Biomedical Engineering
Years Offered: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

2. Requirements

(1) A candidate for the Engineering/Law combined degree must complete 288 credit points, comprising: (a) 144 credit points of units of study from the table of units for the Bachelor of Engineering Honours, appropriate to the stream the candidate is pursuing; and (b) 144 credit points of Law units of study, of which 48 credit points are Combined Law compulsory units of study for years 1, 2 and 3 and are credited towards the requirements for both the Bachelor of Engineering Honours and the Bachelor of Laws.

(2) Requirements for the Bachelor of Engineering Honours. Candidates are required to achieve a minimum HWAM (Honours Weighted Average Mark) of 65% to qualify for the Honours degree. Students who satisfy all requirements for graduation except the HWAM required for honours will be awarded the PASS degree Bachelor of Engineering.

(3) Requirements for the Bachelor of Laws. To qualify for the award of the Bachelor of Laws, candidates must complete 144 credit points taken from the Faculty of Law Undergraduate Table, comprising: (i) 102 credit points of compulsory units of study; and (ii) 42 credit points of elective units of study, of which a maximum of 36 credit points are taken from Part 1 and a minimum of 6 credit points are taken from Part 2.

(4) Acceptable alternative units of study. Most units of study offered by the Science Faculty shown in the tables can be replaced by an equivalent advanced level unit, subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling. Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester's standard units.

This course outline should be read in conjunction with the course rules specified in the relevant faculty handbooks at http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type CP CP From
Core
6 ENGG1801: Engineering Computing
Core
6 ENGG1960: Introduction to Biomedical Engineering
Core
6 LAWS1006: Foundations of Law
Core
3 MATH1001: Differential Calculus


Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1021.
Core
3 MATH1002: Linear Algebra

Year 1 - Semester 2

Type CP CP From
Core
6 CHEM1101: Chemistry 1A


Note: This unit is discontinued from 2018. Replacement unit is CHEM1111.
Core
6 LAWS1012: Torts
Core
0 LAWS1013: Legal Research 1
Core
3 MATH1003: Integral Calculus and Modelling


Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1023.
Core
3 MATH1005: Statistical Thinking with Data
Core
6 MBLG1001: Molecular Biology and Genetics (Intro)

Year 2 - Semester 1

Type CP CP From
Core
6 CHEM1102: Chemistry 1B


Note: This unit is discontinued from 2018. Replacement unit is CHEM1112.
Core
6 ELEC1103: Fundamentals of Electrical and Electronic Engineering
Core
6 LAWS1014: Civil and Criminal Procedure
Core
6 MATH2067: DEs and Vector Calculus for Engineers


Note: This unit is discontinued from 2018. Replacement unit is MATH2021.

Year 2 - Semester 2

Type CP CP From
Core
6 AMME1362: Introduction to Engineering Materials
Core
6 LAWS1015: Contracts
Core
0 LAWS1019: Legal Research II
Core
6 ELEC2104: Electronic Devices and Circuits
Core
6 MECH2901: Anatomy and Physiology for Engineers

Year 3 - Semester 1

Type CP CP From
Core
6 LAWS1023: Public International Law
Core
6 MECH3660: Manufacturing Engineering


Note: From 2018 BE(Biomedical) students should take AMME3660 instead of MECH3660.
6 Select from Unit Block:
Bioelectronics & Biomedical Control Units
6 Select from Unit Block:
Engineering Systems Units


Note: May also be taken in Semester 2.

Year 3 - Semester 2

Type CP CP From
Core
6 LAWS1016: Criminal Law
Core
6 LAWS1017: Torts and Contracts II
Core
6 LAWS1021: Public Law
Core
6 MECH3921: Biomedical Design and Technology

Year 4 - Semester 1

Type CP CP From
Core
6 AMME4111: Thesis A
Core
6 AMME4971: Tissue Engineering
Core
0 ENGG4000: Practical Experience
6 Select from Unit Block:
Recommended Biomedical Electives


Note: The degree requires 18 credit points of these units including at least one of the following four units: AMME4990, AMME4992, CHNG5605 or ELEC5701.
6 Select from Unit Block:
Applied Biomedical Computing Units


Note: May also be taken in Semester 2.

Year 4 - Semester 2

Type CP CP From
Core
6 AMME4112: Thesis B
Core
6 MECH4961: Biomechanics and Biomaterials
12 Select from Unit Block:
Recommended Biomedical Electives

Year 5 - Semester 1

Type CP CP From
Core
6 LAWS2010: Administrative Law
Core
6 LAWS2011: Federal Constitutional Law
Core
6 LAWS2012: Intro to Property and Commercial Law
Core
6 LAWS2013: The Legal Profession

Year 5 - Semester 2

Type CP CP From
Core
6 LAWS2014: Corporations Law
Core
6 LAWS2015: Equity
Core
6 LAWS2016: Evidence
Core
6 LAWS2017: Real Property

Year 6 - Semester 1

Type CP CP From
Core
6 LAWS2018: Private International Law A
Elective
18 Electives.

Note: In year 6 students are required to complete LAWS2018 Private International Law A plus 42 credit points from Semester 1 Senior Elective Units as listed in Law Faculty Handbook Table 1. See Law Faculty Handbook for more details: http://sydney.edu.au/handbooks/law/

LAWS2018 may be taken in Semester 1 or Semester 2. Students who commenced the Combined Law program before 2011 do not need to complete LAWS2018 but must complete 48 credit points of elective units of study rather than 42 credit points.

Year 6 - Semester 2

Type CP CP From
Elective
24 Electives.

4. Pathways

No streams/majors defined for this course version.

5. Unit Blocks

Block 3 - Engineering Systems Units (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
AMME2261 Fluid Mechanics 1 6 Semester 1
AMME2262 Introduction to Thermal Engineering 6 Semester 2
CHNG2803 Heat and Mass Transfer 6 Semester 1
ELEC2302 Signals and Systems 6 Semester 2
MECH2400 Mechanical Systems Design 1 6 Semester 1

Block 4 - Bioelectronics & Biomedical Control Units (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
AMME4790 Introduction to Biomechatronics 6 Semester 2
ELEC3802 Fundamentals of Biomedical Engineering 6 Semester 1

Note: AMME4790 has been replaced by AMME5790 from 2017

Block 5 - Applied Biomedical Computing Units (Max CP: 6)

Unit Code Unit Name CP Sessions Offered
AMME4981 Applied Biomedical Engineering 6 Semester 1
COMP5424 Information Technology in Biomedicine 6 Semester 1
COMP5456 Introduction to Bioinformatics [not running] 6 Semester 2

Block 6 - Recommended Biomedical Electives (Min CP: 18,Max CP: 18)

Unit Code Unit Name CP Sessions Offered
AMME4710 Computer Vision and Image Processing 6 Semester 2
AMME4981 Applied Biomedical Engineering 6 Semester 1
AMME4990 Biomedical Product Development 6 Semester 1
AMME4992 Regulatory Affairs in the Medical Industry 6 Semester 2
AMME5931 Nanomaterials in Medicine 6 Semester 1
AMME5951 Fundamentals of Neuromodulation 6 Semester 1
AMME5958 Nanotechnology in Biomedical Engineering 6 Semester 2
AMME5962 Introduction to Mechanobiology 6 Semester 2
AMME5995 Advanced Bionics 6 Semester 1
CHNG5601 Membrane Science 6 Semester 1
CHNG5602 Biophysics and Biosensors 6 Semester 2
CHNG5603 Advanced Industrial Modelling and Analysis 6 Semester 1
CHNG5604 Advanced Membrane Engineering 6 Semester 2
CHNG5605 Bio-Products: Laboratory to Marketplace 6 Semester 2
COMP5048 Visual Analytics 6 Semester 1
Semester 2
COMP5424 Information Technology in Biomedicine 6 Semester 1
COMP5456 Introduction to Bioinformatics [not running] 6 Semester 2
ELEC3305 Digital Signal Processing 6 Semester 1
ELEC3404 Electronic Circuit Design 6 Semester 1
ELEC3803 Bioelectronics [not offered in 2021] 6 Semester 2
ELEC5514 IoT Wireless Sensing and Networking 6 Semester 2
ELEC5614 Real Time Computing 6 Semester 1
ELEC5701 Technology Venture Creation [not offered in 2021] 6 Semester 2
HTIN5002 Quality Frameworks for Health Innovation 6 Semester 2 Block Mode
MECH4902 Orthopaedic and Surgical Engineering 6 Semester 2
MECH5310 Advanced Engineering Materials 6 Semester 1
MECH5720 Sensors and Signals 6 Semester 2
MECH5907 Orthopaedic and Surgical Engineering 6 Semester 2
MTRX5700 Experimental Robotics 6 Semester 1

Note: MECH4902 has been replaced by MECH5907 from 2017. At least 18 credit points (three units of study) must be selected from the units listed above including at least one of the following: AMME4990, AMME4992, CHNG5605 or ELEC5701.