|
Faculty of Engineering |
|
|
Faculty of Engineering |
| Course: | Aeronautical / Science (2017) |
| CP Required: | 240 |
| Min FT Duration: | 5.00 Years |
| Min PT Duration: | 5.00 Years |
| Faculty/School: | Faculty of Engineering |
| Years Offered: | 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015 |
| Type | CP | CP From |
| 6 |
Select from
AERO1560: Introduction to Aerospace Engineering |
|
| 3 |
Select from
MATH1002: Linear Algebra |
|
| 6 |
Select from
Unit Block: Selected Junior Science Units Note: Science/Engineering(Hons) combined degrees require 240 credit points, comprising 96 credit points from Science subject areas, with a major in one Science discipline, plus units prescribed for the Engineering specialisation. Science units forming part of core requirements in the Aeronautical Engineering specialisation may be counted as part of the 96 credit point Science requirement. Consult resolutions for Combined Engineering(Hons) /Science degree in Faculty handbooks for further details. |
|
| 6 |
Select from
ENGG1801: Engineering Computing Note: Students wishing to major in Computer Science can replace ENGG1801 with INFO1103. INFO1103 is discontinued from 2018. Replacement unit is INFO1110. |
|
| 3 |
Select from
MATH1001: Differential Calculus Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1021. |
Note:
In the BE/BSc program the 12 cp of core subjects, MATH#### may count to both the science and the engineering degrees. For all subjects which fall in this category the student must meet the credit point requirements of the combined degree by completing additional credit points of Aeronautical electives and/or Science subjects.
MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.
| Type | CP | CP From |
| 6 |
Select from
AMME1362: Introduction to Engineering Materials |
|
| 6 |
Select from
ENGG1802: Engineering Mechanics |
|
| 6 |
Select from
Unit Block: Selected Junior Science Units |
|
| 3 |
Select from
MATH1005: Statistical Thinking with Data |
|
| 3 |
Select from
MATH1003: Integral Calculus and Modelling Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1023. |
Note: MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.
| Type | CP | CP From |
| 6 |
Select from
AMME2261: Fluid Mechanics 1 |
|
| 6 |
Select from
AMME2500: Engineering Dynamics |
|
| 6 |
Select from
AMME2700: Instrumentation |
|
List
|
6 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units |
Note: Students completing a Physics major may be granted exemption from AMME2500
| Type | CP | CP From |
List
|
6 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units |
| 6 |
Select from
ENGG1111: Integrated Engineering 1 |
|
| 6 |
Select from
AMME2262: Introduction to Thermal Engineering |
|
| 6 |
Select from
AMME2301: Mechanics of Solids |
Note:
ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students.
Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
| Type | CP | CP From |
| 6 |
Select from
AMME3500: System Dynamics and Control |
|
List
|
18 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units |
| Type | CP | CP From |
| 2 |
Select from
ENGG2111: Integrated Engineering 2 |
|
| 6 |
Select from
AERO2703: Aircraft Performance and Operations |
|
| 6 |
Select from
MECH2400: Mechanical Systems Design 1 |
|
List
|
12 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units |
Note:
ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv or AERO2711 Advanced Aerospace Project 1, with school approval.
Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
| Type | CP | CP From |
| 6 |
Select from
AERO3261: Propulsion |
|
| 6 |
Select from
AERO3360: Aerospace Structures 1 |
|
| 6 |
Select from
AERO3460: Aerospace Design 1 |
|
| 2 |
Select from
ENGG3111: Integrated Engineering 3 |
|
List
|
6 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units |
Note:
ENGG3111 may be replaced by ENGG3062 Technology Education (Adv) or AERO3711 Advanced Aerospace Project 2, with school approval.
Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
| Type | CP | CP From |
| 6 |
Select from
AERO3560: Flight Mechanics 1 |
|
| 6 |
Select from
AERO3260: Aerodynamics 1 |
|
List
|
12 |
Select from
Unit Blocks: Selected Intermediate Science Units Selected Senior Science Units |
| Type | CP | CP From |
| 6 |
Select from
Unit Block: Selected Senior Science Units |
|
| 2 |
Select from
ENGG4111: Integrated Engineering 4 |
|
| 6 |
Select from
Unit Block: Aeronautical Stream Electives Note: Combined Engineering(Hons)/Science students are required to complete at least 12 cp of Aeronautical Stream electives. |
|
| 6 |
Select from
AERO4460: Aerospace Design 3 |
|
| 6 |
Select from
AMME4111: Thesis A |
|
| 0 |
Select from
ENGG4000: Practical Experience |
Note:
ENGG4111 may be replaced by ENGG4064 Advanced Engineering Design A or AERO4711 Advanced Aerospace Project 3, with school approval.
Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
| Type | CP | CP From |
| 6 |
Select from
Unit Block: Aeronautical Stream Electives Note: Combined Engineering(Hons)/Science students are required to complete at least 12 cp of Aeronautical Stream electives |
|
| 6 |
Select from
Unit Block: Selected Senior Science Units |
|
| 6 |
Select from
AMME4112: Thesis B |
| Type | CP | CP From |
Note:
From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.
You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors
| Type | CP | CP From |
Core
|
6 |
AERO2705: Space Engineering 1 Note: Replacing ENGG1111 |
Core
|
6 |
AERO3760: Space Engineering 2 Note: Replacing AERO2703 |
Core
|
6 |
AERO4701: Space Engineering 3 Note: Replacing AERO4460 |
| 6 |
Select from
Unit Block Space Specialist Electives |
Note: There are ATAR or High WAM (>75%) requirements for entry to this major.
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME4111 | Thesis A | 6 |
Semester 1 Semester 2 |
| AMME4112 | Thesis B | 6 |
Semester 1 Semester 2 |
| ENGG1111 | Integrated Engineering 1 | 6 |
Semester 1 |
| ENGG2111 | Integrated Engineering 2 | 2 |
Semester 1 Semester 2 Int February |
| ENGG3111 | Integrated Engineering 3 | 2 |
Semester 1 Semester 2 |
| ENGG4000 | Practical Experience | 0 |
Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December |
| ENGG4111 | Integrated Engineering 4 | 2 |
Semester 1 |
| MATH1001 | Differential Calculus | 3 |
Semester 1 Summer Main |
| MATH1002 | Linear Algebra | 3 |
Semester 1 Semester 2 Summer Main |
| MATH1003 | Integral Calculus and Modelling | 3 |
Semester 2 Summer Main |
| MATH1005 | Statistical Thinking with Data | 3 |
Semester 1 Semester 2 Int January |
Note: This information is correct as of 2017. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.
Note: This information is correct as of 2017. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.
Note:
A total of 96 credits of Science or IT subject units, including a Science major sequence, must be completed as part of the combined Engineering/Science degree. Science units forming part of core requirements in the chosen engineering specialisation may be counted as part of the 96 credit point Science requirements. Consult resolutions for Combined Engineering /Science degree in Faculty handbooks for further details.
This information is correct as of 2017. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.
| Unit Code | Unit Name | CP | Sessions Offered |
| AERO4260 | Aerodynamics 2 | 6 |
Semester 1 |
| AERO4360 | Aerospace Structures 2 | 6 |
Semester 1 |
| AERO4560 | Flight Mechanics 2 | 6 |
Semester 2 |
Note: Students are required to complete a minimum of 12 cp of units of study from this table of Aeronautical Stream Electives
| Unit Code | Unit Name | CP | Sessions Offered |
| AERO4260 | Aerodynamics 2 | 6 |
Semester 1 |
| AERO4360 | Aerospace Structures 2 | 6 |
Semester 1 |
| AERO4560 | Flight Mechanics 2 | 6 |
Semester 2 |
| AERO5700 | Space Engineering (Advanced) | 6 |
Semester 1 Semester 2 |
| Unit Code | Unit Name | CP | Sessions Offered |
| AERO1560 | Introduction to Aerospace Engineering | 6 |
Semester 1 |
| AERO2703 | Aircraft Performance and Operations | 6 |
Semester 2 |
| AERO3260 | Aerodynamics 1 | 6 |
Semester 2 |
| AERO3261 | Propulsion | 6 |
Semester 1 |
| AERO3360 | Aerospace Structures 1 | 6 |
Semester 1 |
| AERO3460 | Aerospace Design 1 | 6 |
Semester 1 |
| AERO3560 | Flight Mechanics 1 | 6 |
Semester 2 |
| AERO4460 | Aerospace Design 3 | 6 |
Semester 1 |
| AMME1362 | Introduction to Engineering Materials | 6 |
Semester 2 |
| AMME2261 | Fluid Mechanics 1 | 6 |
Semester 1 |
| AMME2262 | Introduction to Thermal Engineering | 6 |
Semester 2 |
| AMME2301 | Mechanics of Solids | 6 |
Semester 2 |
| AMME2500 | Engineering Dynamics | 6 |
Semester 1 |
| AMME2700 | Instrumentation | 6 |
Semester 1 |
| AMME3500 | System Dynamics and Control | 6 |
Semester 1 |
| ENGG1801 | Engineering Computing | 6 |
Semester 1 Int January |
| ENGG1802 | Engineering Mechanics | 6 |
Semester 2 Summer Main Int January |
| MECH2400 | Mechanical Systems Design 1 | 6 |
Semester 1 |