Faculty of Engineering

Biomedical / Commerce (2018)


Note: This course version applies only to students first enrolling in 2018.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Biomedical / Commerce (2018)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: N/A
Faculty/School: Faculty of Engineering
Years Offered: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

2. Requirements

Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units

► 84 credit points of Biomedical stream core units

► 6 credit points of Engineering System elective units

► 6 credit points of Bioelectronics & Biomedical Control elective units

► A minimum of 6 credit points of Biomedical Specialist elective units

Commerce:

► 96 credit points of Commerce units

The handbook rules governing this degree are as follows:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

To qualify for the award of the combined degree:

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Commerce

For the Bachelor of Commerce component of a combined degree:

(a) The units of study that may be taken are set out in Table A of The University of Sydney Business School.

(b) Candidates must complete 96 credit points of units of study selected from the Table of Undergraduate Units of Study from The University of Sydney Business School including:

(i) any required degree core units as set out in Table A of the University of Sydney Business School; and

(ii) a major (48 credit points) or a 3-year program with an embedded major (except for the Professional Accounting Program) from Table A of the University of Sydney Business School; and

(iii) 12 credit points of units of study in the Open Learning Environment as listed in Table O; and

(iv) where appropriate, additional electives from Table A of the University of Sydney Business School or Table S;

(v) If enrolled in a stream, complete the requirements for the stream as specified in Table A of the University of Sydney Business School.

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type CP CP From
3 Select from MATH1021: Calculus of One Variable
6 Select from BUSS1000: Future of Business


Note: You must complete BUSS1000 in your first semester of enrolment.
3 Select from MATH1002: Linear Algebra
6 Select from ENGG1801: Engineering Computing
6 Select from AMME1960: Biomedical Engineering 1A
0 Select from ENGP1000: Professional Engagement Program 1


Note: All students must enrol in ENGP1000 in their first semester of enrolment.

New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 1 - Semester 2

Type CP CP From
6 Select from BUSS1030: Accounting, Business and Society
3 Select from MATH1023: Multivariable Calculus and Modelling
3 Select from MATH1005: Statistical Thinking with Data


Note: Students undertaking the Banking, Business Analytics or Finance majors, or the Professional Accounting program are advised to take BUSS1020 in Year 2 instead of MATH1005. In this semester, you may take MATH1004 instead of MATH1005.
6 Select from ENGG1802: Engineering Mechanics


Note: PHYS1001 may be a valid alternative.
6 Select from AMME1961: Biomedical Engineering 1B

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 2 - Semester 1

Type CP CP From
6 Select from CHEM1111: Chemistry 1A
6 Select from BUSS2000: Leading and Influencing in Business
6 Select from ELEC1103: Fundamentals of Electrical and Electronic Engineering
6 Select from AMME2960: Biomedical Engineering 2

Year 2 - Semester 2

Type CP CP From
6 Select from Unit Block:
Commerce Units


Note: Students undertaking the Banking, Business Analytics or Finance majors, or the Professional Accounting program are advised to take BUSS1020 here.
6 Select from AMME1362: Introduction to Engineering Materials
6 Select from MECH2901: Anatomy and Physiology for Engineers
6 Select from ENGG1111: Integrated Engineering 1
0 Select from ENGP2000: Professional Engagement Program 2


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 3 - Semester 1

Type CP CP From
12 Select from Unit Block:
Commerce Units
6 Select from AMME3660: Biomanufacturing
6 Select from Unit Block:
Engineering Systems Units

Year 3 - Semester 2

Type CP CP From
12 Select from Unit Block:
Commerce Units
2 Select from ENGG2111: Integrated Engineering 2
6 Select from ELEC2104: Electronic Devices and Circuits
6 Select from MECH3921: Biomedical Design and Technology

Year 4 - Semester 1

Type CP CP From
18 Select from Unit Block:
Commerce Units
2 Select from ENGG3111: Integrated Engineering 3
6 Select from Unit Block:
Biomedical Specialist Electives

Year 4 - Semester 2

Type CP CP From
18 Select from Unit Block:
Commerce Units
6 Select from Unit Block:
Bioelectronics & Biomedical Control Units


Note: May be taken in Semester 1 or Semester 2, alternating with Commerce Senior Electives.

Note from 2021 BMET5790 replaces AMME5790, and BMET3802 replaces ELEC3802

Year 5 - Semester 1

Type CP CP From
6 Select from Unit Block:
Commerce Units
2 Select from ENGG4111: Integrated Engineering 4
6 Select from BMET4111: Thesis A
6 Select from AMME4971: Tissue Engineering


Note: Replaced by BMET3971 from 2021
0 Select from ENGP3000: Professional Engagement Program 3


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes
6 Select from Unit Block:
Biomedical Specialist Electives


Note: This can be taken in Semester 1 or Semester 2, swapping with Commerce Senior Electives.

Year 5 - Semester 2

Type CP CP From
6 Select from Unit Block:
Commerce Units
6 Select from BMET4112: Thesis B
6 Select from MECH4961: Biomechanics and Biomaterials


Note: Replaced by BMET3961 from 2021

4. Pathways

No streams/majors defined for this course version.

5. Unit Blocks

Block 1 - Commerce Units (Max CP: 78)

Note: For the Bachelor of Commerce component, students are required to complete a total of 96 credit points of Commerce Table A units as listed in the handbook of the Business School, including 18 credit points of core units, a major or program from Table A and 12 credit points of OLEs. See Faculty handbooks at http://sydney.edu.au/handbooks

Block 3 - Engineering Systems Units (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
AMME2200 Introductory Thermofluids 6 Semester 2
CHNG2803 Heat and Mass Transfer 6 Semester 1
ELEC2302 Signals and Systems 6 Semester 2
MECH2400 Mechanical Systems Design 1 6 Semester 1

Block 4 - Bioelectronics & Biomedical Control Units (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
AMME5790 Introduction to Biomechatronics 6 Semester 2
BMET3802 Biomedical Instrumentation 6 Semester 2
BMET5790 Introduction to Biomechatronics 6 Semester 2
BMET5995 Advanced Bionics 6 Semester 1
ELEC3802 Fundamentals of Biomedical Engineering 6 Semester 1

Note: Note from 2021 BMET5790 replaces AMME5790, and BMET3802 replaces ELEC3802

Block 6 - Biomedical Specialist Electives (Min CP: 6,Max CP: 18)

Unit Code Unit Name CP Sessions Offered
AMME4710 Computer Vision and Image Processing 6 Semester 2
AMME4990 Biomedical Product Development 6 Semester 1
AMME5931 Nanomaterials in Medicine 6 Semester 1
AMME5951 Fundamentals of Neuromodulation 6 Semester 1
AMME5958 Nanotechnology in Biomedical Engineering 6 Semester 2
AMME5962 Introduction to Mechanobiology 6 Semester 2
AMME5992 Regulatory Affairs in the Medical Industry 6 Semester 1
Semester 2
AMME5995 Advanced Bionics 6 Semester 1
BMET2903 Biomedical Physics 6 Semester 1
BMET2922 Computational Analysis for Biomedical Signals 6 Semester 2
BMET2925 AI, Data, and Society in Health 6 Semester 1
Semester 1 Online
BMET3990 Biomedical Product Development 6 Semester 2
BMET5911 Advanced instrumentation for Nanotechnology 6 Semester 1
BMET5933 Biomedical Image Analysis 6 Semester 1
BMET5934 Biomedical Machine Learning 6 Semester 2
BMET5944 Nanofabrication and Bioinspired Materials 6 Semester 2
BMET5953 Rehabilitation Engineering 6 Semester 1
BMET5957 Neural Engineering 6 Semester 2
BMET5963 Microfluidics in Healthcare 6 Semester 2
BMET5964 Advanced Cellular Biomechanics 6 Semester 2
CHNG5601 Membrane Science 6 Semester 1
CHNG5602 Biophysics and Biosensors 6 Semester 2
CHNG5603 Advanced Industrial Modelling and Analysis 6 Semester 1
CHNG5604 Advanced Membrane Engineering 6 Semester 2
CHNG5605 Bio-Products: Laboratory to Marketplace 6 Semester 2
COMP5048 Visual Analytics 6 Semester 1
Semester 2
ELEC3305 Digital Signal Processing 6 Semester 1
ELEC3404 Electronic Circuit Design 6 Semester 1
ELEC3803 Bioelectronics [not offered in 2021] 6 Semester 2
ELEC5514 IoT Wireless Sensing and Networking 6 Semester 2
ELEC5614 Real Time Computing 6 Semester 1
ELEC5701 Technology Venture Creation [not offered in 2021] 6 Semester 2
HTIN5002 Quality Frameworks for Health Innovation 6 Semester 2 Block Mode
MECH5310 Advanced Engineering Materials 6 Semester 1
MECH5720 Sensors and Signals 6 Semester 2
MECH5907 Orthopaedic and Surgical Engineering 6 Semester 2
MTRX5700 Experimental Robotics 6 Semester 1

Note: From 2021 BMET3990 replaces AMME4990.

Block 7 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
BMET4010 Major Industrial Project 24 Semester 1
Semester 2
BMET4111 Thesis A 6 Semester 1
Semester 2
BMET4112 Thesis B 6 Semester 1
Semester 2
CHNG4203 Major Industrial Project 24 Semester 1
Semester 2
CHNG4811 Thesis A 6 Semester 1
Semester 2
CHNG4812 Thesis B 6 Semester 1
Semester 2
CIVL4022 Thesis A 6 Semester 1
Semester 2
CIVL4023 Thesis B 6 Semester 1
Semester 2
ELEC4712 Thesis A 6 Semester 1
Semester 2
ELEC4713 Thesis B 6 Semester 1
Semester 2
ELEC4714 Major Industrial Project 24 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4111 Integrated Engineering 4 2 Semester 1
ENGP1000 Professional Engagement Program 1 0 Semester 1
Semester 2
ENGP2000 Professional Engagement Program 2 0 Semester 1
Semester 2
ENGP3000 Professional Engagement Program 3 0 Semester 1
Semester 2
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR BMET4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR BMET4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream or major.

Block 8 - Commerce Core (Min CP: 18,Max CP: 18)

Unit Code Unit Name CP Sessions Offered
BUSS1000 Future of Business 6 Semester 1
Semester 2
BUSS1030 Accounting, Business and Society 6 Semester 1
Semester 2
BUSS2000 Leading and Influencing in Business 6 Semester 1
Semester 2

Note: You must complete BUSS1000 in your first semester of enrolment.

Students in Engineering/Commerce combined degrees are exempt from completing BUSS1020 and will complete an additional Commerce elective in its place.

Block 9 - Biomedical Stream Core (Min CP: 84,Max CP: 84)

Unit Code Unit Name CP Sessions Offered
AMME1362 Introduction to Engineering Materials 6 Semester 2
AMME1960 Biomedical Engineering 1A 6 Semester 1
AMME1961 Biomedical Engineering 1B 6 Semester 2
AMME2960 Biomedical Engineering 2 6 Semester 1
AMME3660 Biomanufacturing 6 Semester 1
AMME4971 Tissue Engineering 6 Semester 1
BMET3961 Biomaterials 6 Semester 2
BMET3971 Tissue Engineering 6 Semester 1
CHEM1111 Chemistry 1A 6 Semester 1
Semester 2
Int January
ELEC1103 Fundamentals of Electrical and Electronic Engineering 6 Semester 1
ELEC2104 Electronic Devices and Circuits 6 Semester 2
ENGG1801 Engineering Computing 6 Semester 1
Int January
ENGG1802 Engineering Mechanics 6 Semester 2
Summer Main
Int January
MECH2901 Anatomy and Physiology for Engineers 6 Semester 2
MECH3921 Biomedical Design and Technology 6 Semester 2
MECH4961 Biomechanics and Biomaterials 6 Semester 2

Note: From 2021 BMET3971 replaces AMME4971, and BMET3961 replaces MECH4961.