Faculty of Engineering

Biomedical / Science (Medical Science Stream) (2018)


Note: This course version applies only to students first enrolling in 2018.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Biomedical / Science (Medical Science Stream) (2018)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: N/A
Faculty/School: Faculty of Engineering
Years Offered: 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018

2. Requirements

Summary

In summary, the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units (12cp of MATH1* can count towards Science requirements)

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 84 credit points of Biomedical Stream core units (6cp CHEM1* can count towards Science requirements)

► 6 credit points of Engineering Control units

► 18 credit points of Biomedical Specialist elective units

Science (Medical Science Stream) (96 credit points):

► 24 credit points of Science degree core units (12cp of MATH1* can count towards Engineering requirements)

► 48 credit points of Medical Science core (6cp CHEM1* can count towards Engineering requirements)

► 12 credit points of OLE units

► 12 credit points of Science electives

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Science

For the Bachelor of Science component of a combined degree:

(a) The units of study that may be taken are set out in Table A of the Faculty of Science, and Table S and Table O of the Shared Pool for Undergraduate Degrees.

(b) Candidates must complete 96 credit points in the Bachelor of Science including:

(i) any required degree core units as set out in Table A of the Faculty of Science; and

(ii) a major (48 credit points) or a 3-year program with an embedded major from Table A of the Faculty of Science; and

(iii) 12 credit points of units of study in the Open Learning Environment as listed in Table O; and

(iv) where appropriate, additional electives from Table A of the Faculty of Science or Table S;

(v) If enrolled in a stream, complete the requirements for the stream as specified in Table A of the Faculty of Science.

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type CP CP From
6 Select from MEDS1001: Human Biology
6 Select from CHEM1111: Chemistry 1A
3 Select from MATH1021: Calculus of One Variable
6 Select from AMME1960: Biomedical Engineering 1A
3 Select from MATH1002: Linear Algebra
0 Select from ENGP1000: Professional Engagement Program 1


Note: All students must enrol in ENGP1000 in their first semester of enrolment.

New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 1 - Semester 2

Type CP CP From
6 Select from BIOL1007: From Molecules to Ecosystems
6 Select from AMME1362: Introduction to Engineering Materials
3 Select from MATH1023: Multivariable Calculus and Modelling
6 Select from AMME1961: Biomedical Engineering 1B
3 Select from MATH1005: Statistical Thinking with Data

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 2 - Semester 1

Type CP CP From
6 Select from ENGG1801: Engineering Computing
6 Select from ELEC1103: Fundamentals of Electrical and Electronic Engineering
6 Select from ENGG1111: Integrated Engineering 1
6 Select from AMME2960: Biomedical Engineering 2

Year 2 - Semester 2

Type CP CP From
6 Select from ENGG1802: Engineering Mechanics
6 Select from ELEC2104: Electronic Devices and Circuits
6 Select from MECH2901: Anatomy and Physiology for Engineers
0 Select from ENGP2000: Professional Engagement Program 2


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes
6 Select from MECH2400: Mechanical Systems Design 1


Note: From 2024, MECH2400 is offered in Semester 1 only. Students who have not completed MECH2400 should discuss an enrolment plan with their Academic Advisor.

Year 3 - Semester 1

Type CP CP From
6 Select from AMME3660: Biomanufacturing
6 Select from MEDS2003: Biochemistry and Molecular Biology
6 Select from MEDS2001: Key Concepts in Physiology


Note: This unit is discontinued in 2025. Students who have not yet completed MEDS2001 must instead complete PHSI2007/PHSI2907.
6 Select from MEDS2002: Key Concepts in Pharmacology


Note: This unit is discontinued in 2025. Students who have not yet completed MEDS2002 must instead complete PCOL2021.

Year 3 - Semester 2

Type CP CP From
6 Select from Unit Block:
Science Units


Note: 6cp OLEs
6 Select from MECH3921: Biomedical Design and Technology
2 Select from ENGG2111: Integrated Engineering 2
6 Select from MEDS2004: Microbes, Infection and Immunity


Note: This unit is discontinued in 2025. Students who have not yet completed MEDS2004 must instead complete MIMI2002/MIMI2902.
6 Select from MEDS2005: Human Anatomy and Histology


Note: This unit is discontinued in 2025. Students who have not yet completed MEDS2005 must instead complete ANAT2011.

Year 4 - Semester 1

Type CP CP From
2 Select from ENGG3111: Integrated Engineering 3
6 Select from Unit Block:
Science Units


Note: 6cp OLEs
6 Select from Unit Block:
Science Units


Note: 3000-level Medical Science selective
6 Select from Unit Block:
Core 4th Year Control Units


Note: May be taken in Semester 1 or Semester 2, swapping with Biomedical Specialist Electives.

Note from 2021 BMET5790 replaces AMME5790, and BMET3802 replaces ELEC3802
6 Select from AMME4971: Tissue Engineering


Note: Replaced by BMET3971 from 2021
0 Select from ENGP3000: Professional Engagement Program 3


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 4 - Semester 2

Type CP CP From
List
6 Select from Unit Blocks:
Biomedical Specialist Electives
Science Units


Note: As there are 18cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 18cp of electives from either Engineering or Science, or a combination of both.

Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
6 Select from MEDS3888: Medical Science Interdisciplinary Project
6 Select from MECH4961: Biomechanics and Biomaterials


Note: Replaced by BMET3961 from 2021
6 Select from Unit Block:
Biomedical Specialist Electives

Year 5 - Semester 1

Type CP CP From
2 Select from ENGG4111: Integrated Engineering 4
6 Select from Unit Block:
Science Units


Note: 3000-level Medical Science selective
List
6 Select from Unit Blocks:
Biomedical Specialist Electives
Science Units


Note: As there are 18cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 18cp of electives from either Engineering or Science, or a combination of both.

Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
6 Select from BMET4111: Thesis A
6 Select from Unit Block:
Biomedical Specialist Electives

Year 5 - Semester 2

Type CP CP From
6 Select from Unit Block:
Science Units


Note: 3000-level Medical Science selective
6 Select from BMET4112: Thesis B
6 Select from Unit Block:
Biomedical Specialist Electives

4. Pathways

No streams/majors defined for this course version.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
BMET4010 Major Industrial Project 24 Semester 1
Semester 2
BMET4111 Thesis A 6 Semester 1
Semester 2
BMET4112 Thesis B 6 Semester 1
Semester 2
CHNG4203 Major Industrial Project 24 Semester 1
Semester 2
CHNG4811 Thesis A 6 Semester 1
Semester 2
CHNG4812 Thesis B 6 Semester 1
Semester 2
CIVL4022 Thesis A 6 Semester 1
Semester 2
CIVL4023 Thesis B 6 Semester 1
Semester 2
ELEC4712 Thesis A 6 Semester 1
Semester 2
ELEC4713 Thesis B 6 Semester 1
Semester 2
ELEC4714 Major Industrial Project 24 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4111 Integrated Engineering 4 2 Semester 1
ENGP1000 Professional Engagement Program 1 0 Semester 1
Semester 2
ENGP2000 Professional Engagement Program 2 0 Semester 1
Semester 2
ENGP3000 Professional Engagement Program 3 0 Semester 1
Semester 2
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR BMET4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR BMET4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream or major.

Block 2 - Biomedical Stream Core (Min CP: 84,Max CP: 84)

Unit Code Unit Name CP Sessions Offered
AMME1362 Introduction to Engineering Materials 6 Semester 2
AMME1960 Biomedical Engineering 1A 6 Semester 1
AMME1961 Biomedical Engineering 1B 6 Semester 2
AMME2960 Biomedical Engineering 2 6 Semester 1
AMME3660 Biomanufacturing 6 Semester 1
AMME4971 Tissue Engineering 6 Semester 1
BMET3961 Biomaterials 6 Semester 2
BMET3971 Tissue Engineering 6 Semester 1
CHEM1111 Chemistry 1A 6 Semester 1
Semester 2
Int January
ELEC1103 Fundamentals of Electrical and Electronic Engineering 6 Semester 1
ELEC2104 Electronic Devices and Circuits 6 Semester 2
ENGG1801 Engineering Computing 6 Semester 1
Int January
ENGG1802 Engineering Mechanics 6 Semester 2
Summer Main
Int January
MECH2400 Mechanical Systems Design 1 6 Semester 1
MECH2901 Anatomy and Physiology for Engineers 6 Semester 2
MECH3921 Biomedical Design and Technology 6 Semester 2
MECH4961 Biomechanics and Biomaterials 6 Semester 2

Note: From 2021 BMET3971 replaces AMME4971, and BMET3961 replaces MECH4961.

Block 3 - Core 4th Year Control Units (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
AMME5790 Introduction to Biomechatronics 6 Semester 2
BMET3802 Biomedical Instrumentation 6 Semester 2
BMET5790 Introduction to Biomechatronics 6 Semester 2
BMET5995 Advanced Bionics 6 Semester 1
ELEC3802 Fundamentals of Biomedical Engineering 6 Semester 1

Note: Note from 2021 BMET5790 replaces AMME5790, and BMET3802 replaces ELEC3802

Block 4 - Biomedical Specialist Electives (Min CP: 18,Max CP: 18)

Unit Code Unit Name CP Sessions Offered
AMME4710 Computer Vision and Image Processing 6 Semester 2
AMME4990 Biomedical Product Development 6 Semester 1
AMME4992 Regulatory Affairs in the Medical Industry 6 Semester 2
AMME5931 Nanomaterials in Medicine 6 Semester 1
AMME5958 Nanotechnology in Biomedical Engineering 6 Semester 2
AMME5962 Introduction to Mechanobiology 6 Semester 2
AMME5995 Advanced Bionics 6 Semester 1
BMET2903 Biomedical Physics 6 Semester 1
BMET2922 Computational Analysis for Biomedical Signals 6 Semester 2
BMET2925 AI, Data, and Society in Health 6 Semester 1
Semester 1 Online
BMET3990 Biomedical Product Development 6 Semester 2
BMET5911 Instrumentation for Nanotechnology 6 Semester 1
BMET5933 Biomedical Image Analysis 6 Semester 1
BMET5934 Biomedical Machine Learning 6 Semester 2
BMET5944 Nanofabrication and Bioinspired Materials 6 Semester 2
BMET5953 Rehabilitation Engineering 6 Semester 1
BMET5957 Neural Engineering 6 Semester 2
BMET5963 Microfluidics in Healthcare 6 Semester 2
BMET5964 Advanced Cellular Biomechanics 6 Semester 2
CHNG5601 Membrane Science 6 Semester 1
CHNG5602 Biophysics and Biosensors 6 Semester 2
CHNG5603 Advanced Industrial Modelling and Analysis 6 Semester 1
CHNG5604 Advanced Membrane Engineering 6 Semester 2
CHNG5605 Bio-Products: Laboratory to Marketplace 6 Semester 2
COMP5048 Visual Analytics 6 Semester 1
Semester 2
ELEC3305 Digital Signal Processing 6 Semester 1
ELEC3404 Electronic Circuit Design 6 Semester 1
ELEC3803 Bioelectronics [not offered in 2021] 6 Semester 2
ELEC5514 IoT Wireless Sensing and Networking 6 Semester 2
ELEC5614 Real Time Computing 6 Semester 1
ELEC5701 Technology Venture Creation [not offered in 2021] 6 Semester 2
HTIN5002 Quality Frameworks for Health Innovation 6 Semester 2 Block Mode
MECH4902 Orthopaedic and Surgical Engineering 6 Semester 2
MECH5310 Advanced Engineering Materials 6 Semester 1
MECH5720 Sensors and Signals 6 Semester 2
MTRX5700 Experimental Robotics 6 Semester 1

Note: From 2021 BMET3990 replaces AMME4990.

Block 5 - Medical Science Stream Core (Min CP: 48,Max CP: 54)

Unit Code Unit Name CP Sessions Offered
BIOL1007 From Molecules to Ecosystems 6 Semester 2
CHEM1111 Chemistry 1A 6 Semester 1
Semester 2
Int January
MEDS1001 Human Biology 6 Semester 1
MEDS2001 Key Concepts in Physiology 6 Semester 1
MEDS2002 Key Concepts in Pharmacology 6 Semester 1
MEDS2003 Biochemistry and Molecular Biology 6 Semester 1
MEDS2004 Microbes, Infection and Immunity 6 Semester 2
MEDS2005 Human Anatomy and Histology 6 Semester 2
MEDS3888 Medical Science Interdisciplinary Project 6 Semester 2

Note: Students in the Medical Science stream also complete 18 cp of 3000-level Medical Science disciplinary selective units.

The Medical Science stream requirements changed in 2024, resulting in changes to 2000-level MEDS units for students who began their degree before 2024.

MEDS2001, MEDS2002, MEDS2004 and MEDS2005 are discontinued and replaced by PHSI2007/PHSI2907, PCOL2021, MIMI2002/MIMI2902 and ANAT2011. ANAT2011 requires prerequisite BIOL1008, which will need to be completed as one of your Science elective units.

Block 8 - Science Units (Min CP: 30,Max CP: 42)

Note: Candidates must complete 96 credit points of Science (Medical Science stream) study, including:

- 54cp core units

- 18cp 3000-level selective units

- 12 credit points of OLEs

- Elective units as required

Math and Chem units taken as part of the Engineering component may be counted towards the 96 cp total. See Science faculty handbook for list of Science units and majors: http://sydney.edu.au/handbooks/science/